TiVo Community Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter · #1 ·
I seem to be able to adjust the level of buzzzzzing interference by changing the RF number.

But what is it that is actually going on?

I seem to be hearing the channel that was selected before I pressed the TiVo menu.

Sky Digital hooked up, RF lead is actually out at present....

Any particular trick to being buzzzzz free?

TIA
 

·
tivoheaven.co.uk
Joined
·
5,577 Posts
Have a look at this
 

·
Registered
Joined
·
43 Posts
Discussion Starter · #4 ·
cheers again BL :)

It is important to ensure that your TiVo is set to use an appropriate RF output channel to ensure optimum picture and sound quality for both your TiVo's output, and your existing TV channels. This calculator will help you find a suitable output channel for your TiVo. It uses the rule that if a channel x is occupied, then the following channels should not be used: x, x-1, x+1, x-5, x+5, x-9, and x+9.
from the above, do I take it its referring to the televisions saved channels in memory?
as far as I remember my tele isnt even tuned (for arieal) as I turn the SKY on and the scart lead has always triggered the AV

....will also check the scart leads are homed correctly
 
1 - 5 of 5 Posts
Top