TiVo Community Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
818 Posts
Discussion Starter · #1 ·
I'm trying to enable MRV/HMO on a DTivo with 6.2 on it. The only drive in the box is a 160 gig Seagate. When I boot into linux the drive is recognized as ST!!1-0>2!!A. Does this mean the drive is locked ? When I use bootpage -p /dev/hda it returns rOot=dEvhDa. I looked on Seagates site for unlock instructions but they talk about Windows problems. Please help.
 

· Registered
Joined
·
32 Posts
Joe C said:
I'm trying to enable MRV/HMO on a DTivo with 6.2 on it. The only drive in the box is a 160 gig Seagate. When I boot into linux the drive is recognized as ST!!1-0>2!!A. Does this mean the drive is locked ? When I use bootpage -p /dev/hda it returns rOot=dEvhDa. I looked on Seagates site for unlock instructions but they talk about Windows problems. Please help.
Check the connector on the disk drive and the ide cable. I've seen a bent pin cause this type of symptom where the device type gets screwed up like you're seeing.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top