TiVo Community Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
I have a TiVo Premiere TCD746320 that would no longer boot up (all LEDs blinking on the front) so I tried copying the drive to a spare server SATA drive I had laying around (500GB Hitachi 7200RPM).
While the copy worked, and the TiVo now boots up with the replacement drive(yay!), I get video corruption/blocky quality while watching live TV.

The replacement drive is pretty old.

Do I need to get a brand new Western Digital drive(like maybe a Purple?) or is there something else going on with my TiVo?
 

· Registered
Joined
·
107 Posts
One possible issue is that the power supply can't support the 7200RPM server drive.Those would seem to be performance drives, and could draw a lot of power. Needless to say, given the heat generation and power draw I would not plan on using that drive for the long term.

Since the device boots, you could try a CLEAR and DELETE EVERYTHING -- it's possible your old drive's failure caused all sorts of corruption issues. I assume you still have the old drive, in case you're able to copy it again to a new drive -- but I am not holding out a lot of hope if the CLEAR and DELETE EVERYTHING resolves the blocky video...
 

· Registered
Joined
·
13 Posts
Discussion Starter · #4 ·
I haven't tried the new image yet. The drive seems to be working better now but given HighTechnology's comment, I may end up getting a new lower speed drive.
I've seen lots of folks recommend a 5400rpm Red WD drive.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top