TiVo Community Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
I have my tivo hooked to my VCR using the RF out of the DVR to the RF in of the VCR and when I record from my Tivo to VCR then play the VCR the picture is just snowy. I have both of them set to channel 4 and hooked it up exactly the way the book says to. Is there anything else I can check.
 

· Just hangin'
Joined
·
12,629 Posts
Are you sure you have the RF output of the TiVo set to ch 4?

Anyway, you will get better quality if you connect the second set of TiVo A/V outputs to the A/V inputs on the VCR. This will also give you stereo audio which is lost when you use RF. You just need to make sure you set the VCR to record from the line inputs.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top