TiVo Community Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
I have a Tivo Premier XL that I took to our NC cabin. I knew I would only get 1 station due to the mountains. The local ABC station out of Asheville, NC comes in crystal clear on my antenna. When I did a channel search the Tivo found 4 stations, all showing as 13-1 which is the correct station for WLOS from Asheville. Three of them had different call letters listed, the correct one should be WLOSDT channel 13-1. The frequency is showing as 12 for this station but when I click on that listing it will "search for signal" and never come through.

Now what's interesting is another station listed as 13-1 is showing as 13-1 ABC (The ABC is showing as the brown circle with the capitalized gold letters of the ABC logo) No call letters. This is showing as frequency 30. When I click on it the picture comes in crystal clear. My problem though is the guide will never update correctly. This station always says "to be announced" where as the 13-1 WLOSDT guide shows correctly but no signal. As a result I can't program any shows to record.

I contacted Tivo and they said they would work on it. I was there for 3 weeks with no progress. I finally got an email that said it was all corrected, but that there was no ABC broadcasting on frequency 30. How can I get this corrected?
 

· Registered
Joined
·
13 Posts
Same problem here. Channel 13 (WJZ Baltimore) . Lost picture this afternoon. Checked other Tivo's in the house, they still had 13-1 until they called for guide update. Then they also lost the signal. Forced yet a third TIVO to call home , it lost 13-1. I rescanned and have the same result as you . I get it on another transmitter frequency, but "to be announced" in guide.
 

· Unknown Member
Joined
·
4,719 Posts
I don't know for sure whether this is on point, but my guide is a mess due to recent repacks. Redoing guided setup helped some but still issues. Rovi apparently didn't see this coming (or even going, so far). As more and more people submit issues they will likely get fixed eventually.
 

· Registered
Joined
·
12,631 Posts
Same problem here. Channel 13 (WJZ Baltimore) . Lost picture this afternoon. Checked other Tivo's in the house, they still had 13-1 until they called for guide update. Then they also lost the signal. Forced yet a third TIVO to call home , it lost 13-1. I rescanned and have the same result as you . I get it on another transmitter frequency, but "to be announced" in guide.
WJZ changed frequencies today? I thought they were later.
 

· Registered
Joined
·
13 Posts
It must be the repack of frequencies. Two of us in different states have the same issue with the same channel 13.1
Others using over the air 13.1 will likely have the problem when their TIVO updates the guide. I have contacted TIVO about the issue.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top