Joined
·
17,390 Posts
Consider the associated frequencies:
MoCA can coexist with either OTA or Cable TV/Internet, but OTA and Cable cannot share coax. That said, many have employed an antenna/satellite diplexer as a workaround to supplant the cable signal with OTA on a single coax run. See >this post< for more information and an example.
edit: p.s. Also this:
OTA: 40-806 MHz
Cable: 5-1002 MHz
MoCA: 1125-1675 MHz
Cable: 5-1002 MHz
MoCA: 1125-1675 MHz
MoCA can coexist with either OTA or Cable TV/Internet, but OTA and Cable cannot share coax. That said, many have employed an antenna/satellite diplexer as a workaround to supplant the cable signal with OTA on a single coax run. See >this post< for more information and an example.
edit: p.s. Also this:
Re: antenna/satellite diplexers
Though we're not working with satellite signals, antenna/satellite diplexers can be helpful in some MoCA setup scenarios. The difference maker is that the MoCA technology employed in TiVos uses frequencies up in the satellite range (MoCA "D band") ...
Signal frequencies:
OTA: 54-806 MHzDiplexer passpand frequencies:
cable (TV/Internet): 5-1002 MHz
MoCA (D band): 1125-1675 MHz
ANT (VHF/UHF) port: 40-806 MHz
SAT port: 950-2150 MHz
... allowing use of a diplexer for merging or splitting OTA & MoCA signals.
Some users have used diplexers to isolate OTA and CATV coax segments while allowing MoCA to flow between the segments through the diplexer "SAT" port (not needed by you, owing to the planned physical separation); to conserve OTA signal strength while delivering the antenna signal to a single outlet of a MoCA-enabled multi-outlet coax plant; or simply to split MoCA & OTA signals onto separate coax lines, at a slightly lower signal loss than would be experienced using a 2-way splitter, when each line only needs the associated signal.