TiVo Community Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
I keep losing the sound from my source signal. The unit itself still makes sfx, but there is no audio. It's been sporadic over the years, usually I only had to change the channel to regain the audio and once in awhile I need to unplug it. Over the last few days I've had to unplug each day it to get sound any ideas on the issue or a hack around it.

Thanks in advance SG
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #3 ·
It's a Sony SVR 2000, Cable Input on the RF, Satellite using Composite, the Output is composite going to a modulator then through out the house. I eliminated the modulator, still only sfx, same when I switch to S-Vid. I didn't try the RF out becuse it's no use to me that way. Again the only sound I get is just the Tivo indicators, no audio from either source/
 

·
TechKnow Guide
Joined
·
4,779 Posts
Does it matter if you're watching/recording your Cable channels or the Satellite Receiver? What happens if you bypass the Tivo and connect directly to a TV?

The key here is to rule out your video sources and narrow down the problem to one thing, perhaps the Tivo.
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #5 ·
That was a given, I should have been more specific, I've ruled out everything but Tivo. I can be watching live thru it and the sound will drop out. When it's in this state if it records there is no sound either. As I said only the sfx is heard so the output seems to be working. I assume it's something with the input, since it happens with both the RF and Composite.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top