[spinhar1]

My Roamio Pro has started having no video (HDMI) in the morning. TV has just a "no input screen".
Hard reboot corrects the problem till next time. Usually a couple of days later, when it happens again. Reboot corrects the issue. Has happened three times now? Any ideas?

 

[WVZR1]

Does your HDMI go directly to the display or through an AVR? What might happen if you just toggle to the next tuner? Random reconnects of the HDMI cable for starters maybe. Some I believe do it 'faithfully' monthly. New HDMI cable for a start? Are the front panel lights lit as expected when you experience the issue?

See this thread and see if the 'remote key sequence' might save you the reboot/restart. Consider HDMI connection refreshes though and consider it maintenance.

Any way to reset HDMI port with rpc commands without reboot?

* A power supply might not be out of the question

 

[gigaquad]

The HDMI output on Roamios are notoriously bad about going out after a storm. We've got one that had to move to the composite output.

 

[kpeters59]

Are you running TE4?

Are you putting your TiVo in 'Sleep Mode'?

Try toggling the settings for that or turning off Wake With TiVo, unless you really need it.

Also, try altering your 'turn on procedure'. Change timing and whatnot until you can find one that works.

-KP

 

[spinhar1]

Are you running TE4?

Are you putting your TiVo in 'Sleep Mode'?

Try toggling the settings for that or turning off Wake With TiVo, unless you really need it.

Also, try altering your 'turn on procedure'. Change timing and whatnot until you can find one that works.

-KP

No to both of those. Hasn't happened in awhile. Have had this pro for a long time, with no problems. Thanks

 

[WVZR1]

The only issue I've had with my Roamio is it 'going to sleep/standby' on it's own. It's very random but a nuisance. I know I'm not brushing/bumping the front panel. Standby has never been turned on. It occurred today when I tried the A95 Mini from the main display, the Roamio I found was 'asleep' no green led - seemed to linger longer than I liked at the 'waking up' so I pulled the plug.

 

[spinhar1]

The only issue I've had with my Roamio is it 'going to sleep/standby' on it's own. It's very random but a nuisance. I know I'm not brushing/bumping the front panel. Standby has never been turned on. It occurred today when I tried the A95 Mini from the main display, the Roamio I found was 'asleep' no green led - seemed to linger longer than I liked at the 'waking up' so I pulled the plug.

My green light is on when this happens?