TiVo Community Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
Looking for help on this. Using a bolt vox in OTA only one channel ABC pixilation problem. I have tried channel master amplifier no difference installed two antennas with CM combiner with offset direction. NBC to ABC 7 degrees separation same distance. Tivo signal meter useless

thanks for your input
 

· Registered
Joined
·
487 Posts
check the signal levels,
if that is ok, you may have an issue with multipath signal
the same signal is received slightly offset in time.
Having 2 different antennas makes this worse.

first try to point to ony ABC station with one directional antenna
and see if you can get the station.

ps what is the frequency of the station VHF, UHF ???
 

· Registered
Joined
·
74 Posts
Discussion Starter · #3 ·
check the signal levels,
if that is ok, you may have an issue with multipath signal
the same signal is received slightly offset in time.
Having 2 different antennas makes this worse.

first try to point to ony ABC station with one directional antenna
and see if you can get the station.

ps what is the frequency of the station VHF, UHF ???
Tivo Bolt signal meter does not work. Shows 74 on all channels even those I dont get.
Had same problem with single CM stealthtenna very aggravating.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top