TiVo Community Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
59 Posts
DON'T BUY A NEW DRIVE!!

The tuners in the HR10 sometimes don't initialize properly on restart/power up!

Here's what you do...

Disconnect your satellite cables from the HR10, then restart/reboot/plug in the unit and wait until the sequence hangs at "acquiring information from the satellite". Reconnect the cables. The download will then proceed and the restart will complete. If this doesn't work, then maybe you do need a new drive, but this should work!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top