TiVo Community Forum banner
1 - 8 of 8 Posts

·
Robert
Joined
·
4 Posts
Discussion Starter · #1 ·
I have a DirectTV Plus Receiver Model R15-100 that I need to program to control a JVC TH-M603 DVD home theatre system.

I tried all of the codes provided in the Direct TV remote users guide. Code 21863 will allow the remote to turn the JVC DVD home theatre off and on but it will not operate the volume. I am using the remotes AV1 position.

Does anyone know how to get the Direct TV remote to control the volume on the JVC DVD home theatre?
 

·
Remote Czar
Joined
·
4,277 Posts
181218121812 said:
I have a DirectTV Plus Receiver Model R15-100 that I need to program to control a JVC TH-M603 DVD home theatre system.

I tried all of the codes provided in the Direct TV remote users guide. Code 21863 will allow the remote to turn the JVC DVD home theatre off and on but it will not operate the volume. I am using the remotes AV1 position.

Does anyone know how to get the Direct TV remote to control the volume on the JVC DVD home theatre?
The volume keys NEVER work initially with ANY aud code in the white directv remotes not until you do the following: First there HAS to be a tv code programmed to the tv device or the volume keys won't work. With code 21863 or whichever gave you power programmed in, then:

1. av1
2. press and hold MUTE & SELECT for two blinks
3. enter 9 9 3
4. press SELECT
 

·
Robert
Joined
·
4 Posts
Discussion Starter · #3 ·
Your instructions worked like a charm!

Thanks so much. I had called direct TV, but they only gave me a few more 5 digit codes and said if they didn't work that there remote could not control the volume to my DVD home theatre.

Thanks again.

Robert
 

·
Robert
Joined
·
4 Posts
Discussion Starter · #5 ·
Before you helped me get the Direct TV to control the DVD home theatre's volume the Direct TV remote was controlling the TV sets volume (when in the Direct TV mode). Now of course it doesn't. But now the Direct TV remote will not control the TV sets volume when it is in the TV mode. When in the TV mode it now controls the DVD home theatre volume.

I can live with this if I have to.

Is there a way to have the Direct TV remote control the TV's volume when in the TV mode?
 

·
Remote Czar
Joined
·
4,277 Posts
If you wish the jvc volume in only the AV1 device, and tv in all other devices do the following:

1. tv
2. press and hold MUTE & SELECT for two blinks
3. enter 9 9 3
4. press SELECT, now the tv volume is in all devices,

1. av1
2. press and hold MUTE & SELECT for two blinks
3. enter 9 9 3
4. press VOL UP

Now the jvc volume is in the AV1 device only, and the tv volume in all other devices.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top