Joined
·
545 Posts
Hi All,
I have had my TiVo since Day One (I was waiting for Dixons to open and when I got in they hadn't heard of it and I made them check out the back where they found their model) but I have only recently tried upgrading. A year ago I purchased a 120GB HDD from Pacelink with all s/ware installed. Last week I added a Turbonet card. After some Subnet problems I got it working and set about using the various helpful guides to take a crash course in hacking.
I tried to use TiVoweb yesterday and I had no access. I could telnet & ftp though. So I used the guides and reloaded TiVoweb successfully. I then tried to reinstall all of the stuff I had done (some was deleted & some wasn't) and some new stuff. When I tried to change the read status though, I kept getting this error message;
mount: warning: cannot change mounted device with a remount
At some point though it seems that either a powercut that we suffered yesterday has caused problems or (more likely) I have rebooted without making the system READ ONLY.
How can I get the system back to how it should be. I have searched the forums and the only thread I can find is this one http://www.tivocommunity.com/tivo-vb/showthread.php?t=267422 and I don't think it answers my question.
I have added an extract of my kernel file and it looks to my completely untrained eye as though I may have some problems.
Tivoweb is working fine and more importantly so is TiVo
I should say at this point that I am a complete programming novice although I can follow instructions.
I am sorry about the length of this post but I wanted to get as much info in as poss to save time. Any help or pointers would be much appreciated.
Martin
I have had my TiVo since Day One (I was waiting for Dixons to open and when I got in they hadn't heard of it and I made them check out the back where they found their model) but I have only recently tried upgrading. A year ago I purchased a 120GB HDD from Pacelink with all s/ware installed. Last week I added a Turbonet card. After some Subnet problems I got it working and set about using the various helpful guides to take a crash course in hacking.
I tried to use TiVoweb yesterday and I had no access. I could telnet & ftp though. So I used the guides and reloaded TiVoweb successfully. I then tried to reinstall all of the stuff I had done (some was deleted & some wasn't) and some new stuff. When I tried to change the read status though, I kept getting this error message;
mount: warning: cannot change mounted device with a remount
At some point though it seems that either a powercut that we suffered yesterday has caused problems or (more likely) I have rebooted without making the system READ ONLY.
How can I get the system back to how it should be. I have searched the forums and the only thread I can find is this one http://www.tivocommunity.com/tivo-vb/showthread.php?t=267422 and I don't think it answers my question.
I have added an extract of my kernel file and it looks to my completely untrained eye as though I may have some problems.
PHP:
[I]Jan 16 19:46:05 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:46:05 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:46:07 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:47:07 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:47:07 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:47:08 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:48:08 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:48:08 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:48:09 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:49:09 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:49:09 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:49:11 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:50:11 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:50:11 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:50:12 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:51:12 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:51:12 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:51:13 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:52:13 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:52:14 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:52:15 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:52:18 (none) kernel: tcp_keepalive: call keepopen(0x80c8db80)
Jan 16 19:52:18 (none) kernel: tcp_keepalive: call keepopen(0x80625d00)
Jan 16 19:53:15 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:53:15 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:53:16 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:53:33 (none) kernel: tcp_keepalive: call keepopen(0x80ca41a0)
Jan 16 19:53:33 (none) kernel: tcp_keepalive: call keepopen(0x80625d00)
Jan 1 00:00:17 (none) kernel: Cannot find map file.
Jan 1 00:00:17 (none) kernel: Loaded 20 symbols from 8 modules.
Jan 1 00:00:17 (none) kernel: Old MediaSwitch address map
Jan 1 00:00:17 (none) kernel: Memory configured for 16MB
Jan 1 00:00:17 (none) kernel: CPU clock speed: 54MHz
Jan 1 00:00:17 (none) kernel: ^MTeleworld Customer Device Starting Up!
Jan 1 00:00:17 (none) kernel: DMA Channel VidOut, next irq 50, idle irq 58, channel 5
Jan 1 00:00:17 (none) kernel: MS IMR 2020
Jan 1 00:00:17 (none) kernel: DMA Channel VidIn, next irq 55, idle irq 63, channel 1
Jan 1 00:00:17 (none) kernel: MS IMR 2121
Jan 1 00:00:17 (none) kernel: DMA Channel Events, next irq 52, idle irq 60, channel 4
Jan 1 00:00:17 (none) kernel: MS IMR 2929
Jan 1 00:00:17 (none) kernel: DMA Channel OSD, next irq 48, idle irq 56, channel 7
Jan 1 00:00:17 (none) kernel: MS IMR a9a9
Jan 1 00:00:17 (none) kernel: DMA Channel AudOut, next irq 49, idle irq 57, channel 6
Jan 1 00:00:17 (none) kernel: MS IMR e9e9
Jan 1 00:00:17 (none) kernel: DMA Channel AudIn, next irq 54, idle irq 62, channel 2
Jan 1 00:00:17 (none) kernel: MS IMR ebeb
Jan 1 00:00:17 (none) kernel: DMA Channel VBI, next irq 53, idle irq 61, channel 3
Jan 1 00:00:17 (none) kernel: MS IMR efef
Jan 1 00:00:17 (none) kernel: DMA Channel Ide, next irq 51, idle irq 59, channel 0
Jan 1 00:00:17 (none) kernel: MS IMR ffff
Jan 1 00:00:17 (none) kernel: Boot Parameters=root=/dev/hda7 shondss=false
Jan 1 00:00:17 (none) kernel: Initial MAC address=0:0:0:0:0:0
Jan 1 00:00:17 (none) kernel: Calibrating delay loop.. ok - 53.86 BogoMIPS
Jan 1 00:00:17 (none) kernel: Contiguous region of 1310720 bytes (1179648 for inputs, 131072 for outputs) at 0x801543f0 allocated.
Jan 1 00:00:17 (none) kernel: mem_init: start_mem = 0x80295000, end_mem = 0x81000000
Jan 1 00:00:17 (none) kernel: Memory: 13740k/16384k available (700k kernel code, 1944k data)
Jan 1 00:00:17 (none) kernel: Kernel virtual start=0x81000000, end=0x81d6b000
Jan 1 00:00:17 (none) kernel: Swansea University Computer Society NET3.038 for Linux 2.1
Jan 1 00:00:17 (none) kernel: NET3: Unix domain sockets 0.15 for Linux NET3.038.
Jan 1 00:00:17 (none) kernel: Swansea University Computer Society TCP/IP for NET3.037
Jan 1 00:00:17 (none) kernel: IP Protocols: IGMP, ICMP, UDP, TCP
Jan 1 00:00:17 (none) kernel: Linux version 2.1.24-TiVo-2.5 ([email protected]) (gcc version 2.8.1) #2 Thu Feb 7 17:49:48 PST 2002
Jan 1 00:00:17 (none) kernel: POSIX conformance testing by UNIFIX
Jan 1 00:00:17 (none) kernel: Serial driver version 4.23 with no serial options enabled
Jan 1 00:00:17 (none) kernel: tty00 at 0xf4100000 (irq = 6) is a S403
Jan 1 00:00:17 (none) kernel: tty01 at 0xffc00000 (irq = 3) is a 16550A
Jan 1 00:00:17 (none) kernel: tty03 at 0xffb40000 (irq = 7) is a 16550A
Jan 1 00:00:17 (none) kernel: Ramdisk driver initialized : 16 ramdisks of 4096K size
Jan 1 00:00:17 (none) kernel: IDE: Setup IDE dma engine call back function completed
Jan 1 00:00:17 (none) kernel: set maxFrags and initialize fragp for h=0
Jan 1 00:00:17 (none) kernel: hda: SAMSUNG SV1203N, TiVo-realtime enabled ATA DISK drive
Jan 1 00:00:17 (none) kernel: ide0 at 0xffd00400-0xffd00407,0xffd00438 on irq 32
Jan 1 00:00:17 (none) kernel: idinfo 82=346B 83=7F01 85=3C69 86=3C01 87=4003
Jan 1 00:00:17 (none) kernel: hda: SAMSUNG SV1203N, 114498MB w/2048kB Cache, multiple 16, LBA, CHS=16383/16/63, DMA, SMART
Jan 1 00:00:17 (none) kernel: PPP: version 2.3.0 (demand dialling)
Jan 1 00:00:17 (none) kernel: TCP compression code copyright 1989 Regents of the University of California
Jan 1 00:00:17 (none) kernel: PPP line discipline registered.
Jan 1 00:00:17 (none) kernel: PPP Deflate Compression module registered
Jan 1 00:00:17 (none) kernel: Partition check:
Jan 1 00:00:17 (none) kernel: hda:Started kswapd v 1.12
Jan 1 00:00:17 (none) kernel: hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14
Jan 1 00:00:17 (none) kernel: VFS: Mounted root (ext2 filesystem) readonly.
Jan 1 00:00:17 (none) kernel: 16 pages of PROM memory freed
Jan 1 00:00:17 (none) kernel: 3 pages of unused kernel memory freed
Jan 1 00:00:17 (none) kernel: Init: Console opened as FD 0
Jan 1 00:00:17 (none) kernel: Starting rc.sysinit
Jan 1 00:00:17 (none) kernel: Releasing /initrd and clearing ramdisk, if they exist
Jan 1 00:00:17 (none) kernel: warning: can't open /var/mtab: No such file or directory
Jan 1 00:00:17 (none) kernel: umount: /initrd: not mounted
Jan 1 00:00:17 (none) kernel: Activating swap partitions
Jan 1 00:00:17 (none) kernel: Adding Swap: 130044k swap-space (priority -1)
Jan 1 00:00:17 (none) kernel: Loading i2c driver
Jan 1 00:00:17 (none) kernel: Box setup for PAL mode
Jan 1 00:00:17 (none) kernel: Loading FPGA driver
Jan 1 00:00:17 (none) kernel: fpga driver configured in PAL mode.
Jan 1 00:00:17 (none) kernel: fpga module running SAA7118 video encoder
Jan 1 00:00:17 (none) kernel: Msp: MajorRevCode Version 0x4
Jan 1 00:00:17 (none) kernel: Msp: ROM Version 0xa25
Jan 1 00:00:17 (none) kernel: Msp: ProductCode = 0xa
Jan 1 00:00:17 (none) kernel: Msp: MSP3410
Jan 1 00:00:17 (none) kernel: MSP34X0D
Jan 1 00:00:17 (none) kernel: memstart = 0x80155000 : size = 0x120000
Jan 1 00:00:17 (none) kernel: Standin 0: addr 0x80159000, len 0x11c000
Jan 1 00:00:17 (none) kernel: Checking for Kickstart panic signal
Jan 1 00:00:17 (none) kernel: No panic situation detected
Jan 1 00:00:17 (none) kernel: Cleanup /dev/hda9 pass 1
Jan 1 00:00:17 (none) kernel: ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda9 is mounted.^M
Jan 1 00:00:17 (none) kernel: /dev/hda9 was not cleanly unmounted, check forced.
Jan 1 00:00:17 (none) kernel: Fix summary information? yes
Jan 1 00:00:17 (none) kernel:
Jan 1 00:00:17 (none) kernel: /dev/hda9: 202/32768 files (7.9% non-contiguous), 18959/131072 blocks
Jan 1 00:00:17 (none) kernel: Cleanup /dev/hda9 pass 2
Jan 1 00:00:17 (none) kernel: ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda9 is mounted.^M
Jan 1 00:00:17 (none) kernel: /dev/hda9: clean, 202/32768 files, 18959/131072 blocks
Jan 1 00:00:17 (none) kernel: /dev/hda9 is clean after pass 2
Jan 1 00:00:17 (none) kernel: Mounting /var
Jan 1 00:00:17 (none) kernel: warning: can't open /var/mtab: No such file or directory
Jan 1 00:00:17 (none) kernel: /dev/hda9 on /var type ext2 (rw)
Jan 1 00:00:17 (none) kernel: Cleaning up /var/mtab...
Jan 1 00:00:17 (none) kernel: Using default TIVO_SVR_ADDR
Jan 1 00:00:17 (none) kernel: Mounting initial environment...
Jan 1 00:00:17 (none) kernel: Cleaning up temporary files in /var/tmp
Jan 1 00:00:17 (none) kernel: Cleaning up old slices and bundles in /var/packages...
Jan 1 00:00:17 (none) kernel: Checking space in /var
Jan 1 00:00:17 (none) kernel: About to check tasks for tty to shutdown
Jan 1 00:00:17 (none) kernel: This one's (29) goin' down
Jan 1 00:00:17 (none) kernel: Attempting to fix modem using: /tvlib/modem/patches/P2109-V90/ram/expect_script
Jan 1 00:00:17 (none) kernel: spawn /tvbin/modempatch /tvlib/modem/patches/P2109-V90/ram/Patch9-2-RAM.s37 ^M
Jan 1 00:00:17 (none) kernel: ATZ^M^M
Jan 1 00:00:17 (none) kernel: OK^M
Jan 1 00:00:17 (none) kernel: AT**^M^M
Jan 1 00:00:17 (none) kernel: Download initiated ..^M
Jan 1 00:00:17 (none) kernel: Getting ready to send files
Jan 1 00:00:17 (none) kernel: ..................................................^M
Jan 1 00:00:17 (none) kernel: OK^M
Jan 1 00:00:17 (none) kernel: Sending of patch succeeded
Jan 1 00:00:17 (none) kernel: INTERACTIVE
Jan 1 00:00:17 (none) kernel: ^MAT!9F01?^M^M
Jan 1 00:00:17 (none) kernel: 9F01: 09 02 A9 6B 8D E7 9D E2 ^M
Jan 1 00:00:17 (none) kernel: OK^M
Jan 1 00:00:17 (none) kernel: PATCH_VERIFIED
Jan 1 00:00:17 (none) kernel: FILEBASED
Jan 1 00:00:17 (none) kernel: ^MEXITING WITH '0'
Jan 1 00:00:17 (none) kernel: About to check tasks for tty to shutdown
Jan 1 00:00:17 (none) kernel: Scanning for phase1 repair scripts
Jan 1 00:00:17 (none) kernel: Initializing TiVo extension...
Jan 1 00:00:17 (none) kernel: Set up environment vars for hardware configuration...
Jan 1 00:00:17 (none) kernel: Remote control is TIVO
Jan 1 00:00:17 (none) kernel: MFS partition on /dev/hda10
Jan 1 00:00:17 (none) kernel: Loading media drivers...
Jan 1 00:00:17 (none) kernel: Loading ideturbo ...
Jan 1 00:00:17 (none) kernel: TiVo disk statistics module loaded (byteswap enabled)
Jan 1 00:00:17 (none) kernel: Disk cautionlevel is 3
Jan 1 00:00:17 (none) kernel: hda: Generic ATA management
Jan 1 00:00:17 (none) kernel: Auto-detecting oslink module (asic 1).
Jan 1 00:00:17 (none) kernel: Multi-Verifier
Jan 1 00:00:17 (none) kernel: Not Installing oslink module.
Jan 1 00:00:17 (none) kernel: Loading fan ...
Jan 1 00:00:17 (none) kernel: Loading therm ...
Jan 1 00:00:17 (none) kernel: Loading pxmpegdecode ...
Jan 1 00:00:17 (none) kernel: We are using the Philips 7128 video encoder.
Jan 1 00:00:17 (none) kernel: pxmpegdecode configured in PAL mode.
Jan 1 00:00:17 (none) kernel: PX DECODE HYBRID: IBM CS22 initialization completed!
Jan 1 00:00:17 (none) kernel: MPEG: MPEG subsystem initialization completed
Jan 1 00:00:17 (none) kernel: MAJOR number = 78
Jan 1 00:00:17 (none) kernel: Loading scartmux ...
Jan 1 00:00:17 (none) kernel: Splash the screen...
Jan 1 00:00:17 (none) kernel: Writing 401560 bytes to OSD at address 0
Jan 1 00:00:17 (none) kernel: Update IR microcode using /sbin/irmicro.hex
Jan 1 00:00:17 (none) kernel: Atmel part found, 2kB of program memory, AT90S2313
Jan 1 00:00:17 (none) kernel: MicroVeriry: bad=0, GetFpaRegCnt=0, AndFpgaCnt=0, OrFpgaCnt=0
Jan 1 00:00:17 (none) kernel: Device already programmed with this microcode
Jan 1 00:00:17 (none) kernel: Starting update ...
Jan 1 00:00:17 (none) kernel: Look for debug board ...
Jan 1 00:00:17 (none) kernel: SIOCSIFHWADDR: Operation not supported by device
Jan 1 00:00:17 (none) kernel: IP struct was not filled in!
Jan 1 00:00:17 (none) kernel: sa is: 0x20000 0x0 0x7ffffcd4 0x7ffffcf0
Jan 1 00:00:17 (none) kernel: sa.sin_addr = 0x7ffffc38 a sockaddr is 16 bytes
Jan 1 00:00:17 (none) kernel: SIOCSIFADDR: Operation not supported by device
Jan 1 00:00:17 (none) kernel: eth0: unknown interface.
Jan 1 00:00:17 (none) kernel: Setting TCP keepalive parameters...
Jan 1 00:00:17 (none) kernel: Starting logging daemons...
Jan 1 00:00:17 (none) kernel: Check for PROM update ...
Jan 1 00:00:17 (none) kernel: Loading mixaud ...
Jan 1 00:00:17 (none) kernel: Updating system clock UID=0
Jan 16 19:54:32 (none) kernel: Time set to: Mon Jan 16 19:54:32 2006
Jan 16 19:54:32 (none) kernel: Have a nice day.
Jan 16 19:54:32 (none) kernel: Checking for additional disk...
Jan 16 19:54:32 (none) kernel: Starting EventSwitcher...
Jan 16 19:54:33 (none) kernel: Start fan control...
Jan 16 19:54:35 (none) kernel: Scanning for phase2 repair scripts
Jan 16 19:54:37 (none) kernel: Checking for database conversions...
Jan 16 19:54:38 (none) kernel: Checking new software installation
Jan 16 19:54:39 (none) kernel: SwSystem 2.5.5-01-1-023 is already active, nothing to do.
Jan 16 19:54:39 (none) kernel: Scanning for phase3 repair scripts
Jan 16 19:54:39 (none) kernel: Starting Services.
Jan 16 19:54:39 (none) kernel: Scanning for phase4 repair scripts
Jan 16 19:54:39 (none) kernel: Starting PPP, running remote login
Jan 16 19:54:39 (none) kernel: /etc/rc.d/rc.sysinit.author: /var/hack/bin/tivoftpd: No such file or directory
Jan 16 19:54:40 (none) kernel: MCP startup complete
Jan 16 19:54:40 (none) kernel: rc.sysinit is complete
Jan 16 19:54:40 (none) kernel: Warning: kernel-module version mismatch
Jan 16 19:54:40 (none) kernel: ^I/lib/modules/ax88796.o was compiled for kernel version 2.1.24-TiVo.1
Jan 16 19:54:40 (none) kernel: ^Iwhile this kernel is version 2.1.24-TiVo-2.5
Jan 16 19:54:43 (none) kernel: ax88796 version 20030223-0
Jan 16 19:54:43 (none) kernel: ax88796: updated tlb entry 2 to 1M
Jan 16 19:54:43 (none) kernel: ax88796: using MAC address 00:0B:AD:69:C6:67
Jan 16 19:54:43 (none) kernel: ax88796: driver installed
Jan 16 19:54:43 (none) kernel:
Jan 16 19:54:43 (none) kernel: registered device ppp0
Jan 16 19:54:43 (none) kernel: IP struct was not filled in!
Jan 16 19:54:43 (none) kernel: sa is: 0x20000 0xc0a80009 0x7ffffce4 0x7ffffd00
Jan 16 19:54:43 (none) kernel: sa.sin_addr = 0x7ffffc48 a sockaddr is 16 bytes
Jan 16 19:54:44 (none) kernel: route.tivo forgot to specify route netmask.
Jan 16 19:54:44 (none) kernel: Couldn't bind to socket.
Jan 16 19:54:48 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:55:42 (none) kernel: Microcode version 00034
Jan 16 19:55:44 (none) kernel: Initialize with 1 live caches
Jan 16 19:55:44 (none) kernel: mediaswitch: resetting adjustments
Jan 16 19:55:44 (none) kernel: osd buffer size = 1080000
Jan 16 19:55:49 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:55:49 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:55:50 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:55:53 (none) kernel: IrBlaster.C::SetChannel(), Line: 367, Bad Channel Request, 129, ChanLength 1.
Jan 16 19:55:54 (none) kernel: mediaswitch: returning -1 from standin tune after tuning to ch -3 with adjust 0
Jan 16 19:55:54 (none) kernel: tuning:lock 1
Jan 16 19:55:55 (none) kernel: Done with this packet
Jan 16 19:56:46 (none) kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Jan 16 19:56:50 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:56:50 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:56:52 (none) kernel: custpppd started on /dev/cua3
Jan 1 00:00:17 (none) kernel: Attempting to fix modem using: /tvlib/modem/patches/P2109-V90/ram/expect_script
Jan 1 00:00:17 (none) kernel: spawn /tvbin/modempatch /tvlib/modem/patches/P2109-V90/ram/Patch9-2-RAM.s37 ^M
Jan 1 00:00:17 (none) kernel: ATZ^M^M
Jan 1 00:00:17 (none) kernel: OK^M
Jan 1 00:00:17 (none) kernel: AT**^M^M
Jan 1 00:00:17 (none) kernel: Download initiated ..^M
Jan 1 00:00:17 (none) kernel: Getting ready to send files
Jan 1 00:00:17 (none) kernel: ..................................................^M
Jan 1 00:00:17 (none) kernel: OK^M
Jan 1 00:00:17 (none) kernel: Sending of patch succeeded
Jan 1 00:00:17 (none) kernel: INTERACTIVE
Jan 1 00:00:17 (none) kernel: ^MAT!9F01?^M^M
Jan 1 00:00:17 (none) kernel: 9F01: 09 02 A9 6B 8D E7 9D E2 ^M
Jan 1 00:00:17 (none) kernel: OK^M
Jan 1 00:00:17 (none) kernel: PATCH_VERIFIED
Jan 1 00:00:17 (none) kernel: FILEBASED
Jan 1 00:00:17 (none) kernel: EXITING WITH '0'
Jan 1 00:00:17 (none) kernel: About to check tasks for tty to shutdown
Jan 1 00:00:17 (none) kernel: Scanning for phase1 repair scripts
Jan 1 00:00:17 (none) kernel: Initializing TiVo extension...
Jan 1 00:00:17 (none) kernel: Set up environment vars for hardware configuration...
Jan 1 00:00:17 (none) kernel: Remote control is TIVO
Jan 1 00:00:17 (none) kernel: MFS partition on /dev/hda10
Jan 1 00:00:17 (none) kernel: Loading media drivers...
Jan 1 00:00:17 (none) kernel: Loading ideturbo ...
Jan 1 00:00:17 (none) kernel: TiVo disk statistics module loaded (byteswap enabled)
Jan 1 00:00:17 (none) kernel: Disk cautionlevel is 3
Jan 1 00:00:17 (none) kernel: hda: Generic ATA management
Jan 1 00:00:17 (none) kernel: Auto-detecting oslink module (asic 1).
Jan 1 00:00:17 (none) kernel: Multi-Verifier
Jan 1 00:00:17 (none) kernel: Not Installing oslink module.
Jan 1 00:00:17 (none) kernel: Loading fan ...
Jan 1 00:00:17 (none) kernel: Loading therm ...
Jan 1 00:00:17 (none) kernel: Loading pxmpegdecode ...
Jan 1 00:00:17 (none) kernel: We are using the Philips 7128 video encoder.
Jan 1 00:00:17 (none) kernel: pxmpegdecode configured in PAL mode.
Jan 1 00:00:17 (none) kernel: PX DECODE HYBRID: IBM CS22 initialization completed!
Jan 1 00:00:17 (none) kernel: MPEG: MPEG subsystem initialization completed
Jan 1 00:00:17 (none) kernel: MAJOR number = 78
Jan 1 00:00:17 (none) kernel: Loading scartmux ...
Jan 1 00:00:17 (none) kernel: Splash the screen...
Jan 1 00:00:17 (none) kernel: Writing 401560 bytes to OSD at address 0
Jan 1 00:00:17 (none) kernel: Update IR microcode using /sbin/irmicro.hex
Jan 1 00:00:17 (none) kernel: Atmel part found, 2kB of program memory, AT90S2313
Jan 1 00:00:17 (none) kernel: MicroVeriry: bad=0, GetFpaRegCnt=0, AndFpgaCnt=0, OrFpgaCnt=0
Jan 1 00:00:17 (none) kernel: Device already programmed with this microcode
Jan 1 00:00:17 (none) kernel: Starting update ...
Jan 1 00:00:17 (none) kernel: Look for debug board ...
Jan 1 00:00:17 (none) kernel: SIOCSIFHWADDR: Operation not supported by device
Jan 1 00:00:17 (none) kernel: IP struct was not filled in!
Jan 1 00:00:17 (none) kernel: sa is: 0x20000 0x0 0x7ffffcd4 0x7ffffcf0
Jan 1 00:00:17 (none) kernel: sa.sin_addr = 0x7ffffc38 a sockaddr is 16 bytes
Jan 1 00:00:17 (none) kernel: SIOCSIFADDR: Operation not supported by device
Jan 1 00:00:17 (none) kernel: eth0: unknown interface.
Jan 1 00:00:17 (none) kernel: Setting TCP keepalive parameters...
Jan 1 00:00:17 (none) kernel: Starting logging daemons...
Jan 1 00:00:17 (none) kernel: Check for PROM update ...
Jan 1 00:00:17 (none) kernel: Loading mixaud ...
Jan 1 00:00:17 (none) kernel: Updating system clock UID=0
Jan 16 19:58:02 (none) kernel: Time set to: Mon Jan 16 19:58:02 2006
Jan 16 19:58:02 (none) kernel: Have a nice day.
Jan 16 19:58:02 (none) kernel: Checking for additional disk...
Jan 16 19:58:02 (none) kernel: Starting EventSwitcher...
Jan 16 19:58:04 (none) kernel: Start fan control...
Jan 16 19:58:05 (none) kernel: Scanning for phase2 repair scripts
Jan 16 19:58:07 (none) kernel: Checking for database conversions...
Jan 16 19:58:08 (none) kernel: Checking new software installation
Jan 16 19:58:08 (none) kernel: SwSystem 2.5.5-01-1-023 is already active, nothing to do.
Jan 16 19:58:08 (none) kernel: Scanning for phase3 repair scripts
Jan 16 19:58:08 (none) kernel: Starting Services.
Jan 16 19:58:09 (none) kernel: Scanning for phase4 repair scripts
Jan 16 19:58:09 (none) kernel: Starting PPP, running remote login
Jan 16 19:58:09 (none) kernel: /etc/rc.d/rc.sysinit.author: /var/hack/bin/tivoftpd: No such file or directory
Jan 16 19:58:09 (none) kernel: MCP startup complete
Jan 16 19:58:10 (none) kernel: rc.sysinit is complete
Jan 16 19:58:10 (none) kernel: Warning: kernel-module version mismatch
Jan 16 19:58:10 (none) kernel: ^I/lib/modules/ax88796.o was compiled for kernel version 2.1.24-TiVo.1
Jan 16 19:58:10 (none) kernel: ^Iwhile this kernel is version 2.1.24-TiVo-2.5
Jan 16 19:58:12 (none) kernel: ax88796 version 20030223-0
Jan 16 19:58:12 (none) kernel: ax88796: updated tlb entry 2 to 1M
Jan 16 19:58:12 (none) kernel: ax88796: using MAC address 00:0B:AD:69:C6:67
Jan 16 19:58:12 (none) kernel: ax88796: driver installed
Jan 16 19:58:12 (none) kernel:
Jan 16 19:58:12 (none) kernel: IP struct was not filled in!
Jan 16 19:58:12 (none) kernel: registered device ppp0
Jan 16 19:58:13 (none) kernel: sa is: 0x20000 0xc0a80009 0x7ffffce4 0x7ffffd00
Jan 16 19:58:13 (none) kernel: sa.sin_addr = 0x7ffffc48 a sockaddr is 16 bytes
Jan 16 19:58:13 (none) kernel: route.tivo forgot to specify route netmask.
Jan 16 19:58:14 (none) kernel: Couldn't bind to socket.
Jan 16 19:58:16 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:58:59 (none) kernel: Microcode version 00034
Jan 16 19:59:01 (none) kernel: Initialize with 1 live caches
Jan 16 19:59:01 (none) kernel: mediaswitch: resetting adjustments
Jan 16 19:59:01 (none) kernel: osd buffer size = 1080000
Jan 16 19:59:18 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:59:18 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 19:59:19 (none) kernel: custpppd started on /dev/cua3
Jan 16 19:59:23 (none) kernel: IrBlaster.C::SetChannel(), Line: 367, Bad Channel Request, 129, ChanLength 1.
Jan 16 19:59:24 (none) kernel: mediaswitch: returning -1 from standin tune after tuning to ch -3 with adjust 0
Jan 16 19:59:24 (none) kernel: tuning:lock 1
Jan 16 19:59:25 (none) kernel: Done with this packet
Jan 16 20:00:12 (none) kernel: IrBlaster.C::SetChannel(), Line: 367, Bad Channel Request, 120, ChanLength 1.
Jan 16 20:00:12 (none) kernel: mediaswitch: returning 0 from standin tune after tuning to ch -3 with adjust 0
Jan 16 20:00:14 (none) kernel: Done with this packet
Jan 16 20:00:19 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:00:19 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:00:21 (none) kernel: custpppd started on /dev/cua3
Jan 16 20:01:22 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:01:22 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:01:23 (none) kernel: custpppd started on /dev/cua3
Jan 16 20:02:23 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:02:23 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:02:25 (none) kernel: custpppd started on /dev/cua3
Jan 16 20:02:56 (none) kernel: idetivo_release: drive=80116760, filp=00000000, inode=802b9c00
Jan 16 20:03:25 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:03:25 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:03:27 (none) kernel: custpppd started on /dev/cua3
Jan 16 20:03:46 (none) kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Jan 16 20:04:27 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:04:27 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:04:29 (none) kernel: custpppd started on /dev/cua3
Jan 16 20:05:29 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:05:29 (none) kernel: /etc/rc.d/rc.remote-login: /dev/cua3: Device or resource busy
Jan 16 20:05:31 (none) kernel: custpppd started on /dev/cua3[/I]I should say at this point that I am a complete programming novice although I can follow instructions.
I am sorry about the length of this post but I wanted to get as much info in as poss to save time. Any help or pointers would be much appreciated.
Martin
