[jlig]

I just installed a Deco mesh router (M9 Plus), and everything works ok except for my TiVo Roamio Pro. I can’t connect to the TiVo either by wifi, ethernet, or moca. I really would like to connect using moca which I successfully had working before Deco was installed. Any help would be appreciated.

 

[brobin]

Make sure you have DHCP selected in Network Settings and not Static IP.

 

[krkaufman]

I really would like to connect using moca which I successfully had working before Deco was installed.

Skipping the usual coax drill-down, since you say you had MoCA working previously, what else changed from the "before" setup, aside from the M9? What was your previous router? Were you relying on a cable gateway with built-in MoCA bridging? Do you have other MoCA devices that *are* working properly?

Alternatively, assuming all the needed components are in place, was the Roamio Pro configured with a static IP address, previously, and might need to be updated (if the network's IP address range has changed)? The prior suggestion Re: DHCP would be one way to tackle this possibility.

 

[jlig]

Thanks for your replies. I had a standard MoCA setup: cable--MoCA--cable--WAN on router--LAN back to MoCA. My original router was a Netgear R7000. All I did was replace the Netgear router with the Deco, and the Roamio wouldn't connect. Yes other devices connected to the MoCA successfully. Roamio not configured for static IP address. So nothing changed except for the replacement of the router.