TiVo Community Forum banner
1 - 13 of 13 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Has anyone successfully connected a usb-c ethernet adapter to a 4K ? I have tried without success. no new screen and no luck connecting to the network. I used my phone just to get it registered. now I can't use it. I want to get this working on an ethernet cable.
 

· Registered
Joined
·
324 Posts

· Registered
Joined
·
324 Posts
Question,
Did you see another screen or did it bypass the wifi setup on the 4K ?
Thanks
The first time you connect the adapter to the usb-c port, I imagine you have to enter the network password .. I can't remember .. all I need to do now is connect the adapter to the usb-c port and that's all.

Here's a YouTube video on it:

 

· Registered
Joined
·
50 Posts
So basically you’re plugging the USB C end of the Ethernet adapter into the TS4K and connecting the Ethernet cable to your switch. How does the TS4K get power then, or is that covered via the adapter?

Am I missing something here?
 

· Registered
Joined
·
3 Posts
Discussion Starter · #7 ·
So basically you're plugging the USB C end of the Ethernet adapter into the TS4K and connecting the Ethernet cable to your switch. How does the TS4K get power then, or is that covered via the adapter?

Am I missing something here?
look at the 4K top is the HDMI cable
on the opposite end ( bottom is a port ) apply power here
on the right side is a USB-c port . connect ethernet here.

M
 

· Read Only
Joined
·
377 Posts
With the UGREEN adapter, it uses the same port that the power plug would connect into. Power and network come into the UGREEN, and both pass through that adapter and into the "main" USB port on the TS4K, leaving the USB-C accessory port free for things such as USB drives, etc.
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top