TiVo Community Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
So after moving into my dorm, I found that my TiVo cannot connect to the internet through my school's network. I called my friend and he figured it was a port problem. So my question is: Is there any way to change the port that my TiVo connects through? What port does the TiVo connect through now, because I could also try calling the tech support people and seeing if they could allow me to have access to that port (It's a Series 2 DT)
 

·
Astute User
Joined
·
11,392 Posts
Do you have to log onto the network with a web browser? If you do, you have to connect the Tivo through your computer, or arrange with the college IT for that policy be waived on that port.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
we don't have to log in through a browser, but the phone line says no dial tone every time i try and connect. I called the it department, but they need to know what port to open.... if anyone knows what port a tivo uses, that would be really helpful.
 

·
Registered
Joined
·
1 Posts
I have experience setting up on a college network. My school requires that all devices be registered on the network. So when you plug in your computer to the network port in your dorm room, you have to register the computer's MAC address with the IT dept. At my school, this is done via the web or by calling the department. See if your school has some kind of MAC address registration in place. if so, all you'll need to do it have your IT department enter your TiVo's MAC address into their database. The MAC can be found in Messages & Settings > Settings > Phone & Network.
 

·
Registered
Joined
·
2 Posts
I had the same problem and you need to get a router, just a cheap wired one and then you set that up. Your MAC address for your computer is probably already registered to the network so you need to find that write it down then set up your router without it connected to the internet. Then you get into your router settings by opening a browser and entering the router IP adress default pass should be admin if not your router will probably tell you what it is. Go into advanced settings and select clone MAC address. Input the MAC adress you got from your computer and clone it. Then you should be able to hook the router up to the internet and plug your Tivo into it. This is a very brief explaination and a more detailed one could probably be found online with google.

(easy way: if you can just try plugging the router into the internet and then your computer and it may let you re-register the router for the internet connection then you're good to go)
 

·
Astute User
Joined
·
11,392 Posts
I am double NATed (by my ISP, and by my router), and have no trouble , except for some file sharing apps, which shall remain nameless.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top