TiVo Community Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
All lights were on and I thought the power supply went bad, so I got a new one at weaknees. I have a back up from a TCD140060. I just bought a new 160GB western digital hard drive, and performed an upgrade from the backup. Said that I had about 175 hours. Plug it all in, and I'm stuck in "powering up..." Anyone have thoughts on this one? The LEDs do turn off for a second after I plug it in. Do I need a new backup? can I use one from another model series 2 that I have in the house???
 

· Registered
Joined
·
1,601 Posts
New power supply is main fix for all lights on. I presume with the new power supply that is no longer a problem? What is your model number? Recheck your drive to make sure there are no drive jumpers installed which is the correct configuration for a single WD Tivo drive. It is best to use a backup image from the exact same model - there are some exceptions covered elsewhere in the forum.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top