TiVo Community Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,666 Posts
I also am not sure about what you say is going on with IC, but to answer about using winmfs; yes, you can use winmfs to copy the TivoHD image from one unit to use in another TivoHD unit.

You might first use winmfs to try to copy the image from original "broken drive" in case any cable card settings are involved. Not sure if that would be a consideration, but all moot anyway if the image is not recoverable from the broken drive.

Good luck.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top