TiVo Community Forum banner
1 - 20 of 190 Posts

· Registered
Joined
·
12,357 Posts
Discussion Starter · #1 ·
Purpose is to summarize 9.1 new features, bug fixes & new bugs based on what users have posted so far. In no particular order, from what I gather so far:

NEW FEATURES
  • Advanced wishlists
  • No longer need to re-setup 30-sec skip following a reboot
    (NOTE: The 1st time you boot up with 9.1 you still have to setup 30SS but after that rebooting will not disable it.)
  • Has foundation for MRV/TTG between S2/S3/THD units (S3/THD MRV/TTG to be activated in November)
  • S3 units (THD units already had this): Diagnostics menus now contains real time updating information
  • S3 units now have the hybrid mode previously only available on THD units: 1080p+1080i->1080i, 720p->720p, SD->480p
    (This is good for TVs that don't support 480i for HDMI inputs)
  • S3 units (THD units already had this): Easy CableCard menu toggling: Under CableCARD N menu, you can switch between CableCARD 1/2 by pressing 1/2
  • S3/THD units: Improved Emergency Alert System handling - will resume recording once EAM completes among other changes.
  • Crestron support for S3
  • S2 units - updated graphics
  • Search by title improvement: No longer have to wait for match list to refresh for each character typed in search keyword
  • Under custom network settings you can now add up to 3 DNS server addresses. Previously only 1 DNS server could be specified
  • TiVo, Slow shortcut takes you into the Messages and Settings menu
  • Rhapsody support

BUG FIXES
NEW BUGS
  • FF/REW and skip back/30-sec skip on S3/THD units have noticeable delays/freezes compared to 8.3 software for HD playback only (SD seems OK). If you 30-sec skip in quick succession you only see a frozen video frame unless you slow down the skips. There is also a slight freeze when exiting these trick play functions.
  • Lockup occurs if attempt is made to edit a manual recording for a clear QAM channel on season pass list.
    NOTE: This issue does not affect those with CableCards. It is discussed in this thread:
    http://www.tivocommunity.com/tivo-vb/showthread.php?t=368153
  • MRV (Confirmed on S2 boxes): Slow transfers and timeouts, especially on DVRs with slower hardware - more details starting here
  • Wishlist bug: When you view Upcoming Episodes of a WL, then back out to the WL, then back out to the main WL screen you are not returned to the WL you entered.
  • To Do List bug: After deleting an item from To Do List, not returned to the deletion point in the list.
  • S2DT bug: Two suggestion programs are recording, one from direct cable and one from the cable box. If the recording from the direct cable ends or is canceled, the cable box is reset to channel 01 causing the box recording to continue on that channel instead of the desired one.
  • S2 TTCB problem: 16:9 mpeg2 video transferred to a S2 no longer shows the correct aspect ratio regardless of the TV Aspect Ratio setting on the TiVo - instead the video is letterboxed upon playback
  • S3 HDMI handshake problem for some users - reboot required to fix

Please post anything else I'm missing.
 

· Registered
Joined
·
15 Posts
Do you know if 9.1 will solve pixelation problems? I get some serious pixelation on the HD channels and I spoke to a level 3 tech today that said it would. At this time, since I do not have it yet, I am skeptical. I don't want to get my hopes up and be dissapointed.
Thanks!
 

· Seasoned gas passer
Joined
·
12,232 Posts
30SS has never reset on a reboot. You always have to re-enter it. This is not a "new feature" of 9.1.
 

· Registered
Joined
·
12,357 Posts
Discussion Starter · #6 ·
Bierboy said:
30SS has never reset on a reboot. You always have to re-enter it. This is not a "new feature" of 9.1.
Maybe my wording was bad. The point I was trying to make is prior to 9.1 following a reboot you had to re-enter the code to get 30SS. Now once you have set it up once you no longer have to re-do it following a reboot. This is a great/welcome change! I've reworded my 1st post to perhaps make it clearer.
NOTE: The 1st time you boot up with 9.1 you still have to setup 30SS but after that rebooting will not disable it.
 

· Registered
Joined
·
6,631 Posts
Under features, you might also want to add "significantly improved grid guide performance on TivoHD."

Under bugs, you might want to add that "lockup occurs if attempt is made to edit a manual recording for a clear QAM channel on season pass list." This issue does not affect those with CableCards. It is discussed in this thread:

http://www.tivocommunity.com/tivo-vb/showthread.php?t=368153
 

· Registered
Joined
·
2,883 Posts
New (duplicate) entry under Account & System Information->CableCARD Decoders to access CableCARD config/diagnostics.

Under CableCARD N menu, you can switch between CableCARD 1/2 by pressing 1/2. I believe prior to this release, S3 users needed to back out and select the other CableCARD from the prior menu.
 

· Registered
Joined
·
6,631 Posts
ZICRON said:
Bug I'm getting is on transferred files from PC to Tivo, is I get audio, but no video, just black screen.

Version 9.1-01-2-540
As per TivoPony, transfers are not supported until November. I'm surprised you were able to transfer anything at all.

wierdo said:
On some S3/THD units. My S3's fast forward behavior is identical (or close enough that I see no difference) to the behavior with 8.3.
How many new recordings did you test? One member reported that they only saw it on recordings made after the update.
 

· Registered
Joined
·
6,631 Posts
Soapm said:
Isn't 540 a S2 Tivo?
You're right it. It is. He's in the wrong forum.

ZICRON said:
who/what is TivoPony? Is there documentation on this?

I've tested about 4 recordings now, one before the update, and 3 after. All the same thing.
TivoPony is the Tivo marketing rep who posts on this forum. This is the HDTV Tivo forum. Transfers are not supported on HDTV Tivos (like the $250 TivoHD) until November. More information on that is here.

Since you have a Series2 (non-HD) Tivo, such transfers are supported today. However, the Tivo can only play SD videos in MPEG-2 format. If you want to see video on a DIVX, AVI, WMV, or X264 file, you'll need to convert those files to MPEG-2 first before they will play on the Tivo. Tivo sells a "Plus" version of Tivo Desktop that will convert those files to MPEG-2 on the fly (so you don't have to do anything).
 

· Registered
Joined
·
377 Posts
bkdtv said:
How many new recordings did you test? One member reported that they only saw it on recordings made after the update.
I've viewed recordings made both before and since the update. They seem to perform identically. There's certainly no black frame on starting/ending a fast forward or on 30 second skip.
 

· Registered
Joined
·
29 Posts
yunlin12 said:
How about the new hybrid mode, where HD resolutions are native, and SD are transmitted at 480p, for us folks with TV's that don't support 480i on HMDI port.

http://www.tivocommunity.com/tivo-vb/showthread.php?p=5559725&&#post5559725
Great! This plus MRV between a Series3 and Series2 would give me a reason to keep my S2 (as a remote unit in the bedroom), otherwise, come December-time, I'm pulling the plug (on its subscription), since the one year contract from transfering the
lifetime transfer to the S3 is finally up (and I feel like I never use it).
 
1 - 20 of 190 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top