TiVo Community Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
182 Posts
Discussion Starter · #1 ·
is this the same software that is on the HR10-250's 6.3e-01-02-357? I sliced both my Phillips and HR10's last night and HR10's worked great. Phillips took an hour to update. I figured the were running on the same software as the HR10's, however i ran the scripts off DVRPlayground to enable hme etc. Well both my phillips went into welcome powering up loops.
 

·
Registered
Joined
·
182 Posts
Discussion Starter · #3 ·
ya I know how to fix it, however I just didnt anyone else to assume the same thing. since its the same software version and that 6.3 software on the hr10-250 will work on the series two directv units.
 

·
Registered
Joined
·
182 Posts
Discussion Starter · #5 ·
labbie48 said:
6.3e tivoapp patches

#No encryption
echo -ne "\x3C\x02\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=1601872

#30-second skip
echo -ne "\x10\x40\x00\x2b" | dd conv=notrunc of=tivoapp bs=1 seek=6717416

#Backdoors
echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=2804964

#HMO/HME
echo -ne "\x34\x11\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=903776
echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=1118188
echo -ne "\x10\x00\x00\x14" | dd conv=notrunc of=tivoapp bs=1 seek=5704588
here is the patch to removes Tivo Plus Features (Trial ends today)

echo -ne "\x24\x02\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=918052

also updated it on dvrpedia.com, hope this is helpful.
 

·
Registered
Joined
·
182 Posts
Discussion Starter · #9 ·
That has nothing to do with MRV. All it does is remove the message Tivo Plus Features (Trial ends today) from directv central. I did the same thing rolled both my philips back. However its either 6.3 or 3.1 on the HR10's. But when u run the above scripts it puts that Tivo Plus message at the bottom of the screen.
 

·
Registered
Joined
·
182 Posts
Discussion Starter · #13 ·
Lord Vader said:
Excuse the late question on this post, but are these patches all now included in the latest version of Zipper or tweak.sh? Just curious.
Well the zipper does have the 30 second skip and encription hack. You have to run these scripts via telnet for HME/HMO and to remove trial message. These only work on 6.3e.

Originally Posted by labbie48
6.3e tivoapp patches

#No encryption
echo -ne "\x3C\x02\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=1601872

#30-second skip
echo -ne "\x10\x40\x00\x2b" | dd conv=notrunc of=tivoapp bs=1 seek=6717416

#Backdoors
echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=2804964

#HMO/HME
echo -ne "\x34\x11\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=903776
echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=1118188
echo -ne "\x10\x00\x00\x14" | dd conv=notrunc of=tivoapp bs=1 seek=5704588

#Removes Tivo Plus Features (Trial ends today)
echo -ne "\x24\x02\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=918052
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top