Temporary Service Connection Issue - returning it

Discussion in 'TiVo Stream 4K' started by AfterTen, Jul 25, 2020.

  1. AfterTen

    AfterTen New Member

    5
    0
    Dec 1, 2015

    Advertisements

    Plugged it in.
    It updated
    Connected to WiFi, says it’s connected to internet.
    Skip Connecting to Google, go through 4 step tutorial
    Last screen is...
    Temporary Service Connection Issue
    DIS_ERR_1000
    There is a service connection issue. Please wait...

    Stuck. Reboot does nothing.
    Back in the box and back it goes.
     
  2. dbpaddler

    dbpaddler Well-Known Member

    1,042
    376
    Sep 25, 2004
    Philly
    OK. Bye.

    Sent from my SM-N975U1 using Tapatalk
     
  3. Noelmel

    Noelmel Active Member

    343
    140
    Nov 6, 2014
    Cincinnati, OH
    Mine connects no problem in the bedroom but won’t control the volume on an older Phillips tv. So I unplugged it took it less than 20 feet away down the hall to my new Roku tv. It controls the volume automatically there but I get the same Wi-Fi connection error constantly. It’ll connect then loose it or connect but not work. I know it’s not my router or network since it works on other tv not even that far away so idk just waiting on the next update to fix these issues


    Sent from my iPhone using Tapatalk
     
  4. dbpaddler

    dbpaddler Well-Known Member

    1,042
    376
    Sep 25, 2004
    Philly
    Did either of you attempt a hard reset and start from scratch? Never hurts to try.

    Little flippant towards the op because most giving it a shot would at least post and try to troubleshoot. Not just make a ***** post and say returning it. Nobody cares if that's what you're doing.

    Sent from my SM-N975U1 using Tapatalk
     
    Noelmel likes this.
  5. Noelmel

    Noelmel Active Member

    343
    140
    Nov 6, 2014
    Cincinnati, OH

    Advertisements

    I just switched mine back to the other tv and it works fine here. I’m scared a hard reset will make me re download all the apps and I’ll loose everything in “my shows” which I’ve spent slot of time putting on. Someone in the Facebook group said it didn’t but others said it did. So idk what to do
     
  6. dbpaddler

    dbpaddler Well-Known Member

    1,042
    376
    Sep 25, 2004
    Philly
    Maybe others have multiple and it can access others for tur my show stuff. Not sure. Tough to really troubleshoot otherwise unless others have the same experience with a fix that didn't start with a reset.

    My one big complaint with tivo in general has always been remotes. Too many variations and technologies with not enough options. Either give us one remote that can actually learn commands and has a backlight, or just make the basic included one and one upgraded one you can buy that will learn and have backlighting. They've been the worst company with so many incompatible remotes over the years and products.

    And funny thing... I have an older (or I call it older) 1080 Pany lcd, and was surprised when the power button turned it off and the volume worked with no programming by me. Guess it gleaned the info via the hdmi connection.

    I might switch my amp to one that can learn the TV volume controls so I can make that little peanut the only remote I need. Perfect for a bedroom setup minus the lack of a backlight. But once the TV is on, I can do without tur backlight, and the remote is pretty intuitive with the layout it might not be necessary after layout memory kicks in.

    Sent from my SM-N975U1 using Tapatalk
     
    Noelmel likes this.
  7. dbpaddler

    dbpaddler Well-Known Member

    1,042
    376
    Sep 25, 2004
    Philly
    I haven't looked, but I wonder if there's a way to reset the remote itself and see if it will figure out the Philips TV.

    Sent from my SM-N975U1 using Tapatalk
     
    Noelmel likes this.
  8. Noelmel

    Noelmel Active Member

    343
    140
    Nov 6, 2014
    Cincinnati, OH
    Right I’m thinking it’s tied to your TiVo or google account so if I log back in maybe it will save my things. At moment I just swapped my Apple TV and this. But I’d rather them be opposite but neither will control the volume on the opposite tv lol


    Sent from my iPhone using Tapatalk
     
  9. Noelmel

    Noelmel Active Member

    343
    140
    Nov 6, 2014
    Cincinnati, OH
    I’ve unpaired and repaired tons of times it works for a few seconds then stops. Even when you manually enter codes there’s no way for them to stick. Apparently it’s a known issue and will be addressed in the next update


    Sent from my iPhone using Tapatalk
     
    dbpaddler likes this.
  10. AfterTen

    AfterTen New Member

    5
    0
    Dec 1, 2015
    I guess my frustration is two fold.
    1. I Googled my error and found nothing. So I’m guessing I’m the only person who came across this error. So this post is really for others in the future that might google the same error and at least see this post.

    2. A consumer device CANNOT do this. It’s bush league. Fire Sticks, Roku, Apple TV 4K. I have them all and none have ever just started and infinitely shown a “Please wait” error. I had higher hopes so it was just frustrating.
     

Share This Page

spam firewall

Advertisements