Advertisements Ok, I've done a lot of searching and only found this on the web in a UK usenet thread. There was no solution posted there... I have no cable box, a Series 2 DT, and TiVo is connected via the TV's video connection (not the tuner). I'm getting a lot of the following: Here's the weird thing: the last time I saw this happen the TiVo remote was not being used. Two shows were set to record at the same time. Someone wanted to watch a 3rd show live so the (a) TiVo remote was put aside and (b) the TV was flipped to the tuner via the TV remote. Prior to doing this, I checked the To Do list to make sure the 2 shows were on track to record. Even more annoying is that the higher ranked Season Pass was the show that was dropped (identical start times). As a precaution, I've restarted the TiVo unit. A double recording worked earlier tonight but I had set TiVo's live TV channel to one of them as a precaution. I've set up a double recording for later tonight with the live TV channel set to a 3rd station as a test. We do have an IR repeater in the room and I have had the TiVo do a 30-sec skip ahead when the repeater was hit with RF noise from something nearby. This only occurred for one 15 minute period. Also, I've never noticed any interaction between the TV remote and the TiVo box. Any other ideas? Ideally, there would be a way to set the "Ok to change channels" to default to "yes" every time or "yes" after a brief wait.