Remote TV Input Code for Hisense TV

Discussion in 'TiVo Help Center' started by BruDeal, May 31, 2020.

  1. BruDeal

    BruDeal New Member

    1
    0
    May 31, 2020
    Any suggested codes to program the TiVo Bolt OTA remote for the TV Input setting for a Hisense 65H8C TV?

    I've tried the TiVo suggested codes of 0374, 0376. 0387 as well as 0104 and 1299 as mentioned in another Hisense remote thread as well as use code 0999 and Channel Up Search process for an hour to search for codes that might work.

    The TiVo remote TV power, volume, and mute all work (using code 0387), but the Input only partially works. When I press the remote's Input button, the TV's input sources display, but the left and right (or up and down) arrow buttons do NOT work to select a different input. It's as though the input signal worked to activate the TV input function but the arrow functions do not map on the TiVo remote. I've tried using other keys on the TiVo remote to see if they work to select a different input, but no help.

    Thoughts?
     
  2. JoeKustra

    JoeKustra in the other Alabama TCF Club

    19,424
    3,511
    Dec 7, 2012
    Ashland, PA...
    Failure of the Input button is not unknown. I had a Samsung that needed a select code to work. Now I have a Sony that pops up the input selections. It will hover until I hit the Input again, which moves the selection and after 2 seconds it takes effect. One alternative is to dump the TiVo remote and get a Harmony.
     
  3. HerronScott

    HerronScott Well-Known Member

    7,403
    1,061
    Jan 1, 2002
    Staunton, VA
    Unfortunately, at least with your model TV, input isn't going to work since it requires the arrow keys to move to a different input (versus continuing to hit Input which would cycle through them for example on our son's Vizio). We use a receiver and have mapped the Input button to the receiver's input selection which cycles through each input on the receiver).

    Scott
     

Share This Page