New AT9 Dish and HR10-250

Discussion in 'DirecTV TiVo Powered PVRs & Receivers' started by coondogg97, Jan 14, 2006.

  1. coondogg97

    coondogg97 New Member

    7
    0
    Sep 18, 2004

    Advertisements

    DTV came over and installed a new AT9 dish that picks up the 5 orbital signals and an OTA antenna. When I go through the dish setup I dont have an option for the new dish. So I have to select the 3 LNB dish. I am hitting about 95% on sats 101 and 110, but I cant pick anything up one 119. DTV came out again and the guy tried a new LNB and that didnt work. Anyone have a clue what might be wrong?

    Thanks,

    Brian
     
  2. classicsat

    classicsat Astute User

    17,877
    0
    Feb 18, 2004
    Ontario Canada.
    Is this a totally new installation, or an upgrade? Did you get 119 before?
     
  3. coondogg97

    coondogg97 New Member

    7
    0
    Sep 18, 2004
    Its an upgrade from a dual LNB dish. I dont think my last dish could get 119.

    Thanks
     
  4. ebonovic

    ebonovic has gone his way...

    11,164
    0
    Jul 24, 2001
    Tinley...
    Do you have a multiswitch installed?

    If so, could be a bum multiswitch.

    I just had the A9 installed thursday, and I can see them all...

    BUT.... the signal first goes to a Zinwel 6802 (6x8), and 4 of those feeds go to my array of 4x8s switches, which then connects to my HR10-250.
     
  5. coondogg97

    coondogg97 New Member

    7
    0
    Sep 18, 2004

    Advertisements

    No, I dont have any switch yet. I am having my TV and eveything else installed next week and thats when im adding the multi switch. I just wanted to make sure with this tivo box I would be able to get all 3 birds..
     
  6. JimSpence

    JimSpence Just hangin'

    30,918
    40
    Sep 19, 2001
    Binghamton, NY
    The HR10-250 can only see the three sats (10, 110, 119), so setting the unit for the oval dish should work just fine as long as the AT9 has been aimed properly.
     

Share This Page

spam firewall

Advertisements