/ Register

Help with Two mini 4k

Discussion in 'TiVo Mini' started by Lyons00, Jan 4, 2021.

  1. Jan 4, 2021 #1 of 10
    Lyons00

    Lyons00 Member

    52
    6
    Jan 24, 2015

    Advertisements

    Hi,
    I have a tivo mini 4k and as of today, I get no picture. My Tivo Pro is working fine, I rebooted the pro, the mini is connected to moca. Was working last night and today, the welcome screen comes on, then the mine goes blank no tv. I've rebooted many times and still don't get live tv or any recordings. Any suggestions would be appreciated?
    Thanks, Jerry
     
  2. Jan 4, 2021 #2 of 10
    kpeters59

    kpeters59 Well-Known Member

    3,122
    645
    Jun 19, 2007
    Houston, Texas
    I'd bet the Mini is outputting a resolution that your TV doesn't support.

    Isn't there a Resolution button on the bottom of the Mini you can toggle through the choices with?

    -KP
     
  3. Jan 5, 2021 #3 of 10
    Lyons00

    Lyons00 Member

    52
    6
    Jan 24, 2015
    Unfortunately, I can't get into the menu is goes off. After more reasearch I tired hooking it up to a Denon receiver (arc) that didn't work for some reason. More reading, I went directly into the tv (HDMI) used optical cord and it worked. I would like to get it to work through the Denon. Any ideas
    Thanks, jerry
     
  4. Jan 5, 2021 #4 of 10
    kpeters59

    kpeters59 Well-Known Member

    3,122
    645
    Jun 19, 2007
    Houston, Texas
    I'd bet the Mini is outputting a resolution that your Denon doesn't support.

    Isn't there a Resolution Button on the Bottom of the Mini you can toggle through the output choices with?

    Or, now that you've got a picture, set the Output to a Resolution the Denon supports and lock it in.

    -KP
     
  5. Jan 5, 2021 #5 of 10
    Lyons00

    Lyons00 Member

    52
    6
    Jan 24, 2015

    Advertisements

    I'll try checking into that, now that it's hooked into the tv. I'll see what it says...thanks, I'll get back to you later.
    Really appreciate it...jerry
     
  6. Jan 5, 2021 #6 of 10
    Lyons00

    Lyons00 Member

    52
    6
    Jan 24, 2015
    My Denon X4000 outputs resolution 3840x2160
     
  7. Jan 5, 2021 #7 of 10
    kpeters59

    kpeters59 Well-Known Member

    3,122
    645
    Jun 19, 2007
    Houston, Texas
    Still, set the Mini to 1080P and see what happens.

    -KP
     
  8. Jan 5, 2021 #8 of 10
    JoeKustra

    JoeKustra in the other Alabama TCF Club

    20,274
    3,762
    Dec 7, 2012
    Ashland, PA...
    No little white button on/under a Mini VOX.
     
    kpeters59 likes this.
  9. Jan 5, 2021 #9 of 10
    mdavej

    mdavej Well-Known Member

    3,691
    1,389
    Aug 13, 2015
    I also have the Denon X4000. It doesn't actually work with any current 4k devices because it doesn't support HDCP 2.2. 4k was too new when it was released. You'll have to keep doing what you're doing. I personally plug all my 4k devices directly into my TV and use ARC for sound on the Denon. Only my 1080p devices are plugged directly into the Denon.
     
  10. Jan 5, 2021 #10 of 10
    Lyons00

    Lyons00 Member

    52
    6
    Jan 24, 2015
    Thanks all...Since this is in my bedroom...I changed it to 1080p and it works through arc on my Denon now...
    Thanks again
     
    kpeters59 likes this.

Share This Page

spam firewall

Advertisements