20.6.3

Discussion in 'TiVo Coffee House - TiVo Discussion' started by AdamHix, Nov 4, 2016.

  1. Dec 4, 2016 #241 of 397
    choco

    choco Member

    316
    9
    Nov 3, 2000
    Southern CA
    I've seen the same bug at least twice so far. It doesn't remember the "hide left column" setting. I'm not using kmttg or anything non-standard, so it's not caused by that.
     
  2. Dec 4, 2016 #242 of 397
    Steve

    Steve TiVowner since 1999

    1,164
    251
    Apr 23, 2003
    White...
    Just tried again with only 1080p and 1080p passthrough checked. I waited a few hours and then woke it up. Same results.

    I misspoke before, BTW. It actually doesn't flicker immediately after coming out of standby, but flickers after I hit the TiVo button a second time to get to the list. So I don't think it's due to a resolution change.
     
  3. Dec 4, 2016 #243 of 397
    JoeKustra

    JoeKustra in the other Alabama TCF Club

    18,175
    3,248
    Dec 7, 2012
    Ashland, PA...
    Any restart will cause the left column to display. Check my earlier post.

    Update: same default display of left column with Premiere and Mini after a restart.
     
    Last edited: Dec 4, 2016
  4. Dec 4, 2016 #244 of 397
    ajwees41

    ajwees41 Well-Known Member

    2,950
    137
    May 7, 2006
    Omaha,NE
    more than 3 days since RC7 here and still no RC9 on Roamios
     
  5. Dec 4, 2016 #245 of 397
    moyekj

    moyekj Well-Known Member

    11,900
    658
    Jan 23, 2006
    Mission...
    Just an HDUI reset is sufficient to reproduce the problem (Thumbs down, Thumbs Up, Play, Play).. Pretty obvious bug to get through beta... So either no beta tester uses 2 column mode or TiVo just didn't care enough to fix it.
     
  6. Dec 4, 2016 #246 of 397
    Jed1

    Jed1 Well-Known Member

    2,112
    261
    Jun 18, 2013
    Frackville, PA.
    The new Vizio E series, M series, and P series has went this route. You get a 6 inch tablet to control the display. It uses Google casting. The downside is there is no Amazon Prime App since Amazon will not cooperate with Google. Also the displays can not be bought on Amazon either.
     
  7. Dec 4, 2016 #247 of 397
    choco

    choco Member

    316
    9
    Nov 3, 2000
    Southern CA
    I got the bug without a restart or HDUI reset, so something in the everyday operation caused it for me, not sure what though.
     
  8. Dec 4, 2016 #248 of 397
    bbrown9

    bbrown9 Active Member TCF Club

    279
    29
    Mar 12, 2011
    I just got the update and saw this in the release notes.

    I can't say that I've noticed any problems with CC and I do have the clock turned on. Has anyone seen any issues?
     
  9. Dec 4, 2016 #249 of 397
    cwoody222

    cwoody222 Well-Known Member

    11,580
    204
    Nov 13, 1999
    Buffalo, NY
    My parents' TiVo's suddenly lost connectivity between each other. They're connected via Moca.

    Nothing changed except they got the update.

    Anyone else have Moca issues post-update?
     
    computersteve likes this.
  10. Dec 4, 2016 #250 of 397
    TivoJD

    TivoJD Active Member

    324
    56
    Feb 7, 2005
    Polk Co,...
    cwoody222, I had a random reboot of my Roamio Plus last night and after that none of the others (Roamio Basic, Roamio OTA & Minis) could connect to the Roamio Plus. I had to shut down everything including all DVRs, minis and my network and restart everything and only then would the others seen the Roamio Plus. Before I shutdown everything, I had some weird stuff going on, the Roamio Plus rebooted and could see and play everything from all other DVRs, but nothing could connect to it. Everything is connected via MoCA in my setup and this odd behavior started for me when the 20.6.3 update came through.
     
    computersteve likes this.
  11. Dec 5, 2016 #251 of 397
    comprev

    comprev New Member

    9
    0
    Oct 31, 2003
    Audio bug in latest update:
    When turning on the screen reader, my Bolt changes the audio setting from Dolby Surround to PCM. Turning off the screen reader does NOT reset this. To reset, I have to go into the Settings menu and change the Audio setting back to surround.
     
  12. Dec 5, 2016 #252 of 397
    JoeKustra

    JoeKustra in the other Alabama TCF Club

    18,175
    3,248
    Dec 7, 2012
    Ashland, PA...
    So noted.
     
  13. Dec 5, 2016 #253 of 397
    elm222

    elm222 TIVO user

    31
    5
    Jan 21, 2015
    Northeast TN
    I too saw that release note and I also use the on screen clock so after I got the update I checked the cc before and after reactivating the clock display and have saw no issues so far,:)
     
  14. Dec 5, 2016 #254 of 397
    MJedi

    MJedi Member

    145
    0
    Jun 17, 2002
    WA
    Same problem here (Bolt can see S3 on the Devices list, but can't connect to it.) Should I open a ticket with TiVo to get this problem more visibility?
     
  15. Dec 5, 2016 #255 of 397
    lew

    lew Well-Known Member

    4,220
    74
    Mar 12, 2002
    Works great. To be clear you don't have to use the included tablet. You can install an app on your mobile device and get the same functionality.

    Higher end sets get a larger tablet.

    .
    Open a ticket. I used online chat.
     
  16. Dec 5, 2016 #256 of 397
    HerronScott

    HerronScott Well-Known Member

    7,037
    985
    Jan 1, 2002
    Staunton, VA
    Definitely!

    Scott
     
  17. Dec 6, 2016 #257 of 397
    davahad

    davahad Member

    95
    9
    Dec 1, 2002
    San Jose, CA
    So I fixed the HDCP 2.2 Error as well as no Dolby Digital being passed to my Denon receiver.
    My Setup is as follows:
    Tivo Bolt - Denon AVR-7200W - Pioneer 1120 HD Plasma

    After the 20.6.3 got no video and all audio was Stereo only. If I manually unplugged the HDMI Cable I would get video until powered off.

    Purchased the 4K Integral HD Fury Integral 4K60 4:4:4 600MHz : HDFury.com | Fix HDCP Error and Solve Connecting issues

    This solved the Video errors by splitting the signal through the 4K Integral.

    To fix the Dolby Digital Issue - In the EDID Automix Settings (using the 4K Integral Android App) I turned off "Allow YCbCr" and Dolby Digital is now functioning again.

    Hopefully this is of help to others that are having the same issue. Now I will see if I can get Tivo to reimburse me for the Integral 4K :)
     
    Last edited: Dec 6, 2016
  18. Dec 6, 2016 #258 of 397
    JonR

    JonR Member

    159
    7
    May 1, 2004
    Xenia, OH
    Turned on Roamio basic this morning and had a blank screen. Turned TiVo 'on' and 'off' several times and it finally had a picture. Unplugged TiVo (hard reset) to force reboot. I've never experienced this happening in the past.

    Roamio Basic S/W: 20.6.3 RC7
    Pioneer Elite Pro 110

    This is unacceptable and must be fixed immediately!

    John
     
  19. Dec 6, 2016 #259 of 397
    JoeKustra

    JoeKustra in the other Alabama TCF Club

    18,175
    3,248
    Dec 7, 2012
    Ashland, PA...
    New Feature. Seems that networking has changed. I have two Premiere boxes that I only power up on weekends. I always have to restart the other TiVo boxes on my network after I power off the Premiere boxes, then tell the other boxes that the Premieres are gone. Now they get grayed out after a few hours. It may be that TiVo has improved their discovery service. This would also mean fewer problems needing fixed IP addresses. Something to check if you have multiple devices. Of course, this change may have unintended consequences that break something else.
     
    computersteve likes this.
  20. Dec 6, 2016 #260 of 397
    Steve

    Steve TiVowner since 1999

    1,164
    251
    Apr 23, 2003
    White...
    It's been two weeks now, and my Bolt+ is still on RC7.

    Anyone else besides Joe get RC9 yet? If so, on which platform? TIA.
     

Share This Page