Advertisements
Separate names with a comma.
I ordered my HD Tivo in January of 2004 and received it in June of the same year. I paid $999 minus the $100 discount plus $55 for 2-day...
It is my understanding that you need four cables: 2 to transfer the horizontal and the vertical outputs of the 101 sat and 2 to transfer the...
I am using a 5 X 8 multiswitch that I bought from http://www.110degrees.com for $69.95 and it has been working for a couple of years now. Another...
The last thing I heard about the new HD DVR for MPEG-4 is that it won't be available until the end of 2005 or after. Based on the delay of the...
I tune my HD Tivo to a non-existing channel just before I start programming it for the day. In my area, channel 3 doesn't exist, so I tune my...
Thank you very much, Doug! Will do as you suggested and search.
Hi Doug! I have always appreciated your posts because you always have the the answers. Now, if you'll pardom my ignorance, what is the...
I don't think you need any connection diagrams to connect a 5X8 multiwsitch (MS) to your Tivos and receivers. The Phase-3 Directv dish has 4...
I had not heard this! Thanks for answering. I guess I don't have to worry about 72.5 for the time being because I live in California and should...
Have I missed some news? I thought Directv only had sats at 101, 110 and 119 WL spots! What is at 72.5? Thanks, Doug, for any answers!
This post has nothing to do with the problem being discussed. It has to do with an attempt on my part to backup a Tivo drive using a Maxtor...
I would like to add that the rate turns out to be 6200 megabytes per hour. At the end of the scanning of the original drive, MFS tools indicates...
I hope Michael won't mind my answering this question. Yes, that is exactly what I did two days ago. I copied a total of 227,991 megabytes from...
I did that, Michael! And it worked very well. Thanks again for the help and patience.
The backup of the original Tivo drive completed during the night. It started on Tuesday at 3:09 PM and, at 3:09 PM on Wednesday, it had backed up...
I failed to indicate that the Pentium-4 CPU in my PC is running at 2.8 MHz, and the front bus is running at 800 MHz.
Hi Michael! I started backup my original Tivo drive yesterday, October 26, at 3:08 PM, using the pair mfsbackup | mfsrestore that we discussed...
Thanks again, Michael.
Thanks for repplying. I followed your advice and tried backing up with mfsbackup Tao - /dev/hda | mfsrestore -s 127 -xzpi - /dev/hdb, but the...
Michael: I really don't want to be a pest, but when I type hdparm -d1 /dev/hda and hdparm -d1 /dev/hdb, I get the message that the command...
