Advertisements
Separate names with a comma.
If you used old dd then try dd_rescue. You can also try to copy recordings with Usage: ./mfscopy [options] SourceA[:SourceB] DestA[:DestB]...
Did you use DD or DD_rescue to copy "bad" drive to a new one? If DD worked I would think drive is not dead. I have replaced "bad" drives that...
How do I upgrade BOLT VOX to full TE4 or is that what I have now? system info is 21.9.1.v14-USC-11-849 Found post on downgrading; happening now...
I just received a 500 GB Bolt Vox. Used the deal to migrate the lifetime from my series 3. I replaced hard drive with Toshiba 2TB L200 before I...
the attaches were errors due to laptop I was using was doing a screen shot instead of paste text. I did do the dd_rescue using one of the 2...
I did a backup to a USB drive before putting the drives back into the Tivo. I had to try different usb ports to find one recognized by suse linux....
copy finished. But with an ETA of 14 seconds there was an error like Source: out of space on video stream. Sorry I didn't write it down. I pulled...
The drive enclosure is about 10 years old so it has been working for a long time. Sabrent USB 2.0 TO SATA/SATA II Aluminum Enclosure With Cooling...
dd_rescue slowed to a crawl so I stopped it. Removed drive from esata case and hooked it up directly. dd_rescue ran with no errors. I have started...
Thanks! I wondered about the :. I will give it a try. Right now I waiting on a dd_rescue of the external drive. dd_rescue is getting DMA retries...
I have a series 3 HD rebooting randomly so I want to copy over to new drives. It has two 1 TB drives and I want to copy to a single internal 2 TB...
When my old Tivos get very slow it can be a warning of disk failure. Remember it is always writing video to the disk for what ever channel its...
I just replaced a failing 2 TB Seagate on my old Series 3 HD with a 2 TB WD Blue from local Best Buy. Tivo would sit at powering up for a long...
When I had the S03 problem I tried similar steps. Could get temporary fix by unplugging the video input. I finally "solved" it by using mfstools...
Can mfs 3.2 be used to copy an S3 with two 1 TB drives to a single drive 2 TB?
I just used both the new number on twc.com/cablecard and the chat feature. Using the phone number I moved an M-card to a new Roamio and an old...
I always wait after shutting down PC before pulling drive. Just to make sure the drive is no longer spinning and data is drive's cache is written...
My steps: Hooked both drives up internally and booted from CD using SUSE ISO from jmbach I got the volume header error running mfsinfo Then I ran...
GC completed at 8:16 PM and all is good. To Do list is there. Program info present
