Advertisements
Separate names with a comma.
The moves in Austin to sdv happened on Tuesday and the broadcast moves happened on Wednesday. My two ta's and tivo's followed the changes and I...
If you pm me the cablecard id and the host id i'm sure we can get you fixed up without a truck roll and you having to take off work.
Ok, the 1st and 3rd page are what you want to look at. Page 1 is tuner 0 and say NBC hd (kxan dt) is tuned at 585 MHz and your s/n is 30 or...
33 is fine. It's when it dips below 30 is when you see macroblocking. That is the screen to check when are having issues though. Of course I...
NBCHD is on a broadcast ingress frequency in Austin. NBCHD and HGTV are not in SDV, so if you are having problems with them go in to your dvr...
This should be fixed for Central Texas now. We had it fixed yesterday but another problem showed up.
The rf output of the cisco ta is +3 dbmv.
Have you checked to see the last time the tivo connected?
It should get the firmware with just the rf and power connected.
It actually uses Linux :D
You do not need a cablecard to pick up the unencrypted locals. And yes, twc knows you are getting them.
10.01. I'm assuming Aaron gave you a call Max?
Firmware update to 10.01 tomorrow around 0200. This affects Austin and Waco.
The process I followed in testing was to pull usb first. If that didnt work I pulled the power to the ta and the tivo. Plug the ta in first and...
I sent the ta's some hits soon after I got your pm.
The two I have are solid. Running 701 with no reboots or missed shows since Sept of 08.
I have had to do the same steps that WSP did once when I accidently unplugged my S3. New firmware for the ta has not been released in Austin...
They send the ta's out "hot", as in already authorized. I would bet it's not on your account correctly and when the billing cycle runs it is...
I would bet the cards are still on your account and they will find out soon enough.
Try rebooting the ta and see if it comes back up. You might not have two-way.
