Separate names with a comma.
I lucked out when I price matched this in store and they matched it for the latest model. $119 for the 2nd version.
I did not edit anything else out of my author file. I will post it when I get home.
I actually did install TWP 1.3 and then replaced it with...
Yes, I would start with removing the drive and start the zipper process. Run that on the pc and then replace the drive back in the Tivo....
Did you use the tar version of the slices or the zipped version?
I ended up doing it this way:
Upgrading 3.15f To 6.3b Without Using The...
OK, I was to upload rbautch's busybox into the hacked tivo and replace that version and now I am able to ls.
Now the problem is I did a clear...
Existing busbox utility detected.
Do you want to delete it and replace it with this version? [y/n]:y...
bash-2.02# echo $PATH
That is correct, I believe.
I saw that folder, I just wasn't sure it was on the Zipper disc in the correct format. Looks fine to me.
Where is the hacked kernel image?
See mine here : link
So you mean this:
gzip -d rbautch_busybox.source.tar.gz; cpio -idu -H tar < rbautch_busybox.source.tar
Are you using the current zipper disk? Did you try reburning it?
If you have an older version of the Zipper, maybe try that since you have...
Boot with the Zipper Disk, then
mount /dev/hdcX /mnt/jim
(where X is either 4 or 7, your active partition)
I will try this when I get home from work. I will report back around early afternoon. Thanks for the tech support.
Well that suggestion did not work. Any other thoughts? Can I replace my busybox through ftp or should I pull the drive and do it on the pc?
I will try this when I get home. Thanks. If that doesn't work, then I will try the changes dswallow recommended.
ftp works fine. I had to make the drive 'rw' to get things to stick, but that worked in telnet. I will try your suggestions.
Upgrading 3.15f To 6.3b Without Using The Slicer And With Some Hacks To Start.
Step 1 Took a blank 250 GB Seagate Drive and ran the Zipper to...
Give me a minute to write up the recipe.
Here is my current author file, any mistakes noticed?
The same thing with 'ls' is happening in the windows telnet client.
Also, my './' is not working, at least not for tivoweb plus 1.4