Advertisements
Separate names with a comma.
Use a good 4 way splitter at the main input, and put the POE here. You will eliminate one split and maybe some losses. Use a second Sat/Ant...
Jeff The PCT products seem to work well. I use the VC-F19A model since I wanted 8 ports. Consider the VC-F15U for your application. Spec attached.
Another way to control two TiVo devices is via the TiVo App (say on an iPad). You can control any of the devices on your network. Also I just...
Mini borrows a tuner from the host TiVo, that is why they only work on 4 tuner or more TiVo boxes. Will automatically release after 4 hours or...
Jeff MoCA operates at a higher frequency than the normal OTA and cable channels use. Thus the splitters and other parts of the Coax network need...
Yes absolutely. I recently signed up for cable (Charter) after about 3 years of OTA only, using Tivo Roamio basic. The monthly cost for 2 cable...
In my experience MoCA works great. With a properly set up network I never have any connection issues or problems. You may need to check your cable...
What krk said. I have a Roamio basic and a bolt, and 4 minis. The minis are pegged to the bolt (cable) but can access the Roamio (OTA). All are on...
Lothar, May not be worth doing now, but your setup could have been cleaner by using a MoCA bypass amp such as PCT-VC-14A in place of the 2...
I also have this PCT MoCA amp and found it has worked well. My new house had Coax cables to most rooms but Ethernet only to 2 locations. All...
Charter gave me the same box but so far I have not set it up. One CSR said I would not need it, but when I picked up the Cable Card they gave me...
RF remote works great. My Bolt is in a cabinet in the laundry room, connected via long HDMI cable to the TV in living room. No problems with door...
If you diplex the OTA into line #2, you will need another POE filter on the rooftop antenna leg of this run, to keep the MoCA signal from...
Yes, the MoCA range is form 1125-1625 MHz I think. The OP could try setting all devices to channel 15; this would have best chance of working with...
The Commscope amp is rated for 54-1002 MHz. It may pass the higher frequencies of MoCA but is not guaranteed to do so. You may need a MoCA...
