Activation Phone call for HD DVR service

tomvee61 · 04-17-2006, 08:57 AM

I have no analog phone line (broadband Vonage-type only).

The D* install tech told me I could bring my HR10-250 to a neighbors with a regular phone line and make the initial call there.

I had set everthing up ok, but couldn't view the DVR menu to make the call. I know the cables were hooked up correctly because I saw the "powering up" message clearly.

Do I need to feed a SAT signal to the box in order to proceed?

stevel · 04-17-2006, 09:16 AM

No, but you need to push the Format button on the front panel to select 480i unless you have the box connected to a HDTV. Also, press the DirecTV button to skip to the menus while it is trying to find the satellite.

Guindalf · 04-17-2006, 09:17 AM

No sat signal is needed for setup so you should have no problems doing the initial call from a neighbor. And you should also be able to connect with VoIP. Do a search and you'll find several threads where people have it working - I don't have VoIP, so I can' t help.

tomvee61 · 04-25-2006, 08:50 AM

thank you for the guidance. I hadn't set the format correctly. Problem solved!
Now enjoying the full Tivo functionality.