|
|
11-06-2005, 07:29 PM
|
#1
|
|
Registered User
Join Date: Apr 2004
Posts: 37
|
r10 and radio remote
Hello,
I have a weird one. I have an older series 2 DTV tivo, and a newer r10. My older one just died, so I swapped in the r10. The wild thing, is now my radio remote extender will not work. The tivo is in the basement, and the tv it controls is on our second floor, so I have a set of those little pyramid remote extenders. They worked great with my older tivo, but the r10 cannot get a signal from the extender? Anyone have any ideas what this could be?
--Brian
|
|
|
|
11-06-2005, 07:36 PM
|
#2
|
|
Registered User
Join Date: Aug 2004
Posts: 60
|
I don't have an answer to your question but I am curious. Why is your tivo in the basement as opposed to being on 2nd floor with the TV as in set top ?
I just got me R10 as well and I am trying to learn something that may be my Tivo is capable of doing that I am not even aware of.
|
|
|
|
|
11-06-2005, 07:44 PM
|
#3
|
|
TechKnow Guide
Join Date: Oct 2002
Location: Mill Creek, Washington
Posts: 11,977
|
May you need to orient the remote repeater so that the R10 can "see" it? There's no reason why your R10 should not work. You are using the remote that came with the R10, right? And it has fresh batteries?
__________________
Sony SAT-T60 120GB (v3.5b)
HR20-700, HR20-100, HR21-200 HD DVR
AM21
HR10-250 HD DVR 400GB (v6.4a)
H21-200 HD Receiver
R10 DVR 160GB (v6.4a)
|
|
|
|
|
11-06-2005, 07:45 PM
|
#4
|
|
Registered User
Join Date: Apr 2004
Posts: 37
|
I have it in the basement because I can run two lines to it down there, and then one single cable to the bedroom tv. I did this so I did not have fish an extra set of RG6 through the walls.
|
|
|
|
|
11-06-2005, 07:45 PM
|
#5
|
|
Registered User
Join Date: Apr 2004
Posts: 37
|
I have about 5 of those peanut remotes...I will go try them all....Good idea.
|
|
|
|
|
11-06-2005, 07:49 PM
|
#6
|
|
Registered User
Join Date: Aug 2004
Posts: 60
|
Quote:
|
Originally Posted by brianhos
I have it in the basement because I can run two lines to it down there, and then one single cable to the bedroom tv. I did this so I did not have fish an extra set of RG6 through the walls.
|
Got it. So how do you get the remote to control it from upstairs ? Sorry I am new at this.
|
|
|
|
|
11-06-2005, 07:56 PM
|
#7
|
|
TechKnow Guide
Join Date: Oct 2002
Location: Mill Creek, Washington
Posts: 11,977
|
Quote:
|
Originally Posted by OCTivo
Got it. So how do you get the remote to control it from upstairs ? Sorry I am new at this.
|
That what his "radio remote extender" does. Essentially two boxes ... one receives the IR remote signals in one room and then beams them via radio signals to the other box that sends the IR remote signals to the device being controlled.
__________________
Sony SAT-T60 120GB (v3.5b)
HR20-700, HR20-100, HR21-200 HD DVR
AM21
HR10-250 HD DVR 400GB (v6.4a)
H21-200 HD Receiver
R10 DVR 160GB (v6.4a)
|
|
|
|
|
11-06-2005, 07:56 PM
|
#8
|
|
Registered User
Join Date: Apr 2004
Posts: 37
|
Ok, I got it... I guess the R10 infrared sensor is not as sensetive. I had to move the repeater a few inches away to get enough signal for it to work....
Now I just need to reneable the r10 and we are good to go... thanks for the ideas guys.
|
|
|
|
|
01-08-2006, 04:28 PM
|
#9
|
|
Registered User
Join Date: Dec 2003
Location: North Carolina
Posts: 10
|
Quote:
|
Originally Posted by brianhos
Ok, I got it... I guess the R10 infrared sensor is not as sensetive. I had to move the repeater a few inches away to get enough signal for it to work....
Now I just need to reneable the r10 and we are good to go... thanks for the ideas guys.
|
I just got a r10 and want to change channels from another room in the house. I assume I need the same setup as you. What do I need to get?
Thanks
|
|
|
|
|
01-08-2006, 05:25 PM
|
#10
|
|
Just hangin'
Join Date: Sep 2001
Location: Binghamton, NY
Posts: 30,302
|
__________________
Jim
Sorry, I had to replace the HR10-250, I now have the HR23-700 and HR24-500!
|
|
|
|
|
01-09-2006, 07:05 PM
|
#11
|
|
Registered User
Join Date: Nov 2003
Posts: 1,749
|
I have one of these and it works well for me... saves having to have the one of the extender gizmos in your room where the TV is.
In my setup, I have 2 TVs all fed from one DTivo RF out, thus I can carry the peanut to any room with one of the DTivo-fed TVs and control the DTivo.
|
|
|
|
|
05-15-2006, 01:20 AM
|
#12
|
|
Registered User
Join Date: Dec 2004
Posts: 42
|
Having a similar issue. Can't get my leapfrog to work, even when the ir cable is taped to the sensor on the R10.
Here is my post:
|
|
|
|
|
09-12-2006, 05:24 PM
|
#13
|
|
Registered User
Join Date: Dec 2005
Location: Chicago
Posts: 9
|
this may be a dumb question
[quote=datapusher]Having a similar issue. Can't get my leapfrog to work, even when the ir cable is taped to the sensor on the R10.
this may be a dumb question...but where IS the location of the IR sensor on the R10? I can't tell where it is? 
|
|
|
|
|
09-12-2006, 05:30 PM
|
#14
|
|
Registered User
Join Date: Dec 2004
Posts: 42
|
It is the ugly white bump on between the controls.
I fixed my problem by getting Amazon to send one out that actually worked. My first was busted.
Also, to get it to work properly I had to put 3 layers of masking tape over the ir sending unit (the wire one).
Good luck
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
