TiVo Community
TiVo Community
TiVo Community
Go Back   TiVo Community > Underground Playground > TiVo Underground
TiVo Community
Reply
Forum Jump
 
Thread Tools
Old 02-11-2007, 06:24 PM   #2311
rbautch
User
 
Join Date: Feb 2004
Location: Chicago, IL
Posts: 3,628
Quote:
Originally Posted by bkdvr
I zippered my HR10-250 - 6.3b yesterday. First, let me say that this made the whole process quite easy compared to few years ago when I hacked my SD dtivo.

One issue is that some lines in start.sh have DOS newlines (^M), so the HMO/HME hacks were not applied initially.

Another issue is when I extract (vstream) a show to my linux box, vsplit seg faults. It seems to work fine when I do it to my Windows PC using tytool. I've tried swapping out the vserver on the Tivo to the same version that's supplied with my linux vstream/vsplit, but that has no effect.

Code:
$ grep "^M" start.sh 
        echo -ne "\x34\x11\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=903436
                        echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=1118524
        echo -ne "\x34\x11\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=903436
                        echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=1118524
 sh /enhancements/b_install.sh &>/dev/null
- Benjamin
Thanks. Fixed now.
__________________
DSR7000 x 4, HR10-250, Prom Modded R10

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
or
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
rbautch is offline   Reply With Quote
Old 02-13-2007, 09:53 AM   #2312
rpmws1
Registered User
 
Join Date: Dec 2005
Posts: 6
wondering if anyone could help me. I have about 5 HDVR2's hacked with 6.2 and good luck with all of them for a long time. I have one that I recently ran this script on again to get the better TWP on and tinker a bit to see what's been added. This box when it reboots after a week or so gets stuck on the Directv sattelite data download at boot up. Box is up ..can telnet file ..can play shows ..just stuck on sattelite data. The first time this happend I thought "logs"??? so i went into /var/logs and wiped them out and rebooted fine. Now it's just sitting here today and I wanted to dig in and figure out what's wrong before I do that again. here is a DU in my logs folder. below. It's not even a MB yet. I am 99% sure this problem is either a cron issue or a startup issue with the author file or either a partition slam out of space or something. But I wanted to ask if anyone else have seen this and know what it must be from exp? thanks in advance!!

office-bash# du -h
833K .
office-bash# du -h *
1.0K Otivoweb.log
899 cidcall.log
1.5K cron.test.out
448 cronlog-main
0 dvdlog
0 kdebug
32K kernel
0 maillog
41K messages
584 ncidd.log
0 secure
8.8K svclog
77 tcdebuglog
100K tclient
1.0K tivoweb.log
0 tvdebuglog
0 tverr
643K tvlog
office-bash#
rpmws1 is offline   Reply With Quote
Old 02-13-2007, 11:20 AM   #2313
Finnstang
King of the North
 
Finnstang's Avatar
 
Join Date: Sep 2003
Location: Winterfell
Posts: 8,640
When it hits the acquiring sat data screen, you can go to the menu and then list and watch something previously recorded? If so, it sounds more like an issue with the sat inputs. Have you tried either putting that HDVR2 in another location or moving another HDVR2 to that one's location? That should rule out things like bad multiswitch or cables.
__________________
Finnstang ain't no Poontang. - Howie
Finnstang is a very wise person. - Wilhite
I actually have Finnstang in my Swype dictionary. - dthmj
You are a genius, Finn! - Tracy
Finnstang is offline   Reply With Quote
Old 02-15-2007, 12:16 AM   #2314
rpmws1
Registered User
 
Join Date: Dec 2005
Posts: 6
Quote:
Originally Posted by Finnstang
When it hits the acquiring sat data screen, you can go to the menu and then list and watch something previously recorded? If so, it sounds more like an issue with the sat inputs. Have you tried either putting that HDVR2 in another location or moving another HDVR2 to that one's location? That should rule out things like bad multiswitch or cables.
no need to try that (again) ..the very first time this happened that's what I tought ..so I took it down and took it into another room ..jumped on a different pair or inputs, rebooted and got the same result ..it just stalls at 9%. Then I brought it back to my original location, re-networked it ..rebooted 10 times using shell, rebooted 5 times via power and remote and same thing ..stuck at 9%. I then learned that deleting everything in /var/log and rebooting fixes it everytime. This seems to happen once a week and this always fixes it. The weird thing is there is only like 1MB of stuff in /var/log in the first place. I am not yet sure if it's a read write issue ..or a space issue yet but it has something to do with either /var as a whole or /var/log and it's not a big deal but very weird. Right now I have a cron job cleaning out the logs.
rpmws1 is offline   Reply With Quote
Old 02-15-2007, 12:28 AM   #2315
rpmws1
Registered User
 
Join Date: Dec 2005
Posts: 6
ok ..just thought of something ..timestamps will tell me what files are growing.

office-bash# cd /var
office-bash# ls -lh
drwxr-xr-x 3 root root 1.0k Jan 2 1970 cache
drwxr-xr-x 2 root root 1.0k Jan 2 1970 dev
drwxr-xr-x 2 root root 1.0k Nov 16 17:06 etc
drwxr-xr-x 2 root root 1.0k Jan 2 18:05 hack
drwxr-xr-x 2 root root 1.0k Feb 14 09:25 log
drwxr-xr-x 2 1048576 -1870528 12.0k Jan 2 1970 lost+found
-rw-r--r-- 1 root root 75 Jan 2 1970 mtab
drwxr-xr-x 2 root root 1.0k Jan 2 1970 packages
drwxr-xr-x 2 root root 1.0k Nov 21 08:18 persist
drwxr-xr-x 2 root root 1.0k Jan 2 1970 run
drwxr-xr-x 2 root root 1.0k Jan 2 18:05 spool
drwxr-xr-x 3 root root 1.0k Nov 16 17:06 state
-rw-r--r-- 1 root root 0 Feb 15 05:15 timestamp
drwxr-xr-x 16 root root 3.0k Feb 15 05:15 tmp
drwxr-xr-x 2 root root 1.0k Jan 2 1970 utils
-rw-r--r-- 1 root root 2 Feb 13 14:22 vardelete_flag

The most recent dir in that list is "tmp"
a ls on tmp:

office-bash# ls -lh
drwxr-xr-x 2 root root 1.0k Feb 13 15:07 ApgManager
-rw-r--r-- 1 root root 484.0k Feb 15 03:34 Correlation.temp.14
-rw-r--r-- 1 root root 31.9k Feb 15 03:54 Genre.temp.0
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 KnownHostComponent
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 NetworkVideoService
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 PassKeyComponent
-rw-r--r-- 1 root root 2.1M Feb 15 03:54 Program.temp.42
-rw-r--r-- 1 root root 596.9k Feb 15 03:34 ProgramToSeries.temp.18
drwxr-xr-x 2 root root 1.0k Feb 13 15:08 RendezvousClient
srwxr-xr-x 1 root root 0 Feb 13 15:06 S_EventSwitcherSocket83
-rw-r--r-- 1 root root 0 Feb 15 03:21 ShowcaseHasClipIndex.temp.0
-rw-r--r-- 1 root root 0 Feb 15 03:21 ShowcaseHasProgramIndex.temp.0
-rw-r--r-- 1 root root 0 Feb 15 03:21 ShowcaseIdTmsIdToIdentIndex.temp.0
-rw-r--r-- 1 root root 0 Feb 15 03:21 ShowcaseIdentToIdIndex.temp.0
-rw-r--r-- 1 root root 0 Feb 15 03:21 ShowcaseIdentToProgramIndex.temp.0
-rw-r--r-- 1 root root 1.9M Feb 15 03:54 Showing.temp.36
-rw-r--r-- 1 root root 1.9M Feb 14 16:54 Showing.temp.38
drwxr-xr-x 2 root root 1.0k Feb 13 15:08 SiHost
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 SystemServices
-rw-r--r-- 1 root root 788.2k Feb 15 03:34 Tms.temp.24
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 dbgc-mcp
prw------- 1 root root 0 Feb 13 15:06 hppm
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 huxley
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 mcp
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 mfsd
drwxr-xr-x 2 root root 1.0k Feb 13 15:07 myworld
-rw-r--r-- 1 root root 0 Feb 13 15:08 myworld.lck
-rw-r--r-- 1 root root 506 Feb 14 10:59 rating_debug.txt
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 shmemd
drwxr-xr-x 2 root root 1.0k Feb 13 15:06 tcphonehome
-rw-r--r-- 1 root root 0 Feb 13 15:06 tcphonehome.lck
-rw-r--r-- 1 root root 3.4k Feb 15 05:15 tmkpidmap
-rw-r--r-- 1 root root 0 Jan 2 1970 tmkpidmap.lock

some of those are getting big and growing. I haven't called TWP from the browser in weeks.

The only files that have changed seem to be in /tmp which links to /var/tmp or visa versa .I tried tailing with -f on some of these files and it looks like bins ..can't read what it is. Logs have quit writing also cause space that's left is low.
rpmws1 is offline   Reply With Quote
Old 02-15-2007, 07:35 PM   #2316
bhughes
Registered User
 
Join Date: Feb 2007
Location: Tulsa
Posts: 2
what instantcake should I have gotten?

I'm having probs with networking. I have a hdvr2 that I zippered with version 2.8 but cannot get a wusb11 v 2.8 wireless usb to work. I built a serial cable and managed to get minicom to get a bash prompt. during boot up I get the following message:

usb.c: USB device 2 (vend/prod 0x1915/0x2233) is not claimed by any active driv.

ifconfig shows only the local loopback if:
bash-2.02# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1100 (1.0 Kb) TX bytes:1100 (1.0 Kb)


lsmod shows :

bash-2.02# lsmod
Module Size Used by Not tainted
vnetusba 173520 2
usb-ohci 23888 0 (unused)
usbcore 101936 0 [vnetusba usb-ohci]
router 66896 36
therm 1488 0
fan 2240 0
ideturbo 5216 1
irblast 3792 0 (unused)
brcmdrv-rb 1228256 138
cobra 91264 4
oslink 26112 12
ircatch 26832 2
i2c_Series2 14320 0 [therm fan cobra]
modemtty_Series2 4896 0
fpga 1920 2
tivoconfig 960 0 (unused)

I see in /etc/hotplug that the vendor/product is there under the vnetusba :


device vnetusba firmware atmel503a
product 03eb 7603 Atmel AT76C503A-i3861 Adapter
product 03eb 7604 Atmel AT76C503A-i3863 Adapter
product 03eb 7605 Atmel AT76C503A-RFMD Adapter
product 050d 0050 Belkin F5D6050 ver 2000
product 05dd ff31 Addtron AWU-120
product 077b 2219 Linksys WUSB11 v2.6
product 0864 4100 NETGEAR MA101
product 0864 4102 NETGEAR MA101 rev B
product 0d5c a002 SMC2662W V.2 / Belkin F5D6050
product 1915 2233 Linksys WUSB11 v2.8
product 2001 3200 D-Link DWL-120 rev E

Do I have to do something to load the firmware to the device?


I found references to some backported modules but am unsure where to get them.

There is also a reference to a new tweak.sh file but the attachment at the top of this monster thread dl's the same tweak.zip file that has the 9-20-2006 date.

I am sure that I am doing something wrong but darned if I can figure it out.

Also, top reports a system load of around 2.5 is this normal? I edited rc.sysinit.author to not start up tivoweb and cron until I get this figured out.


Any help is appreciated this is my first post looking for help and I have researched myself into a significant headache. I more information is neeed please let me know.

TIA

Bret

Added 2-16-2007
I got the instant cake image for a hdvr2 should I have gotten the image for a standalone?

Well it is working now. I rezippered twice but now I am wondering if I was running zipper.sh instead of the binary. I know this is probably in the wrong thread and should be in the zipper thread but I did not want to cross post. I did NOT use a different image but continued with the same one that DVRUpgrade sent me to when I selected Hughes / HDVR2. I have telnet from via putty and tivoweb that I have checked out so far. This is really pretty neat stuff.

Thanks to all who have come before.

Bret

Last edited by bhughes : 02-16-2007 at 02:15 PM. Reason: additional info
bhughes is offline   Reply With Quote
Old 02-19-2007, 08:31 AM   #2317
pgaulson
pgaulson
 
Join Date: Jun 2005
Posts: 14
I have hacked three Directv Tivo's: one with Gunny's Unguide then two with Zipper from Mar '06. Because I wanted to update TWP, etc., I re-ran tweak. I can no longer connect with linksys USB200M v2, used on one of my Tivo's. Fortunately, my other devices are older and still work. But, somehow my driver for USB200M v2 was wiped out and I can't figure out how to get it back. When I uninstall and reinstall tweak, it doesn't ask about reinstalling usb 2.0 drivers. It says

"skipping backport driver installation, settings found in MFS"

How do I get tweak to not skip backport driver installation so I can get it back? Are there settings I should change in MFS and if so, how do I change or delete them?
pgaulson is offline   Reply With Quote
Old 02-19-2007, 12:24 PM   #2318
rbautch
User
 
Join Date: Feb 2004
Location: Chicago, IL
Posts: 3,628
Quote:
Originally Posted by pgaulson
I have hacked three Directv Tivo's: one with Gunny's Unguide then two with Zipper from Mar '06. Because I wanted to update TWP, etc., I re-ran tweak. I can no longer connect with linksys USB200M v2, used on one of my Tivo's. Fortunately, my other devices are older and still work. But, somehow my driver for USB200M v2 was wiped out and I can't figure out how to get it back. When I uninstall and reinstall tweak, it doesn't ask about reinstalling usb 2.0 drivers. It says

"skipping backport driver installation, settings found in MFS"

How do I get tweak to not skip backport driver installation so I can get it back? Are there settings I should change in MFS and if so, how do I change or delete them?
Are you sure it didn't say:
Code:
"Wireless settings found in MFS."
"Skipping backport driver installation..."

__________________
DSR7000 x 4, HR10-250, Prom Modded R10

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
or
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
rbautch is offline   Reply With Quote
Old 02-19-2007, 02:55 PM   #2319
pgaulson
pgaulson
 
Join Date: Jun 2005
Posts: 14
Quote:
Originally Posted by rbautch
Are you sure it didn't say:
Code:
"Wireless settings found in MFS."
"Skipping backport driver installation..."
Actually, that's probably exactly what it said and I apologize for not being exact.

Is there an easy way that I can install the drivers for Linksys USB200M version 2, and then not have them wiped out in any future uninstall/reinstall of tweak?

If this issue has been adressed already in earlier posts, I could not find it. I did see some instances where others were losing telnet connectivity after running tweak, but those seemed related to use of later versions of the Zipper. My Tivo's all work just fine and I like the update for TivoWebPlus, except I now can only connect with earlier adapters, like the Linksys USB200M version 1. I never had this problem, back in Mar/Apr '06, whenever I did any tweak uninstall/reinstall's. I confess that I've not been reading the hundreds of posts since then -- I was simply enjoying my hacked Tivo's with all the benefits of MRV, Tivowebplus, TyTool, etc. I really appreciate all the great work you and Gunny have done, not just for providing the Zipper and Enhancements but even more for the fantastic job since then with all the support!
pgaulson is offline   Reply With Quote
Old 02-19-2007, 10:26 PM   #2320
rbautch
User
 
Join Date: Feb 2004
Location: Chicago, IL
Posts: 3,628
Quote:
Originally Posted by pgaulson
Actually, that's probably exactly what it said and I apologize for not being exact.

Is there an easy way that I can install the drivers for Linksys USB200M version 2, and then not have them wiped out in any future uninstall/reinstall of tweak?

If this issue has been adressed already in earlier posts, I could not find it. I did see some instances where others were losing telnet connectivity after running tweak, but those seemed related to use of later versions of the Zipper. My Tivo's all work just fine and I like the update for TivoWebPlus, except I now can only connect with earlier adapters, like the Linksys USB200M version 1. I never had this problem, back in Mar/Apr '06, whenever I did any tweak uninstall/reinstall's. I confess that I've not been reading the hundreds of posts since then -- I was simply enjoying my hacked Tivo's with all the benefits of MRV, Tivowebplus, TyTool, etc. I really appreciate all the great work you and Gunny have done, not just for providing the Zipper and Enhancements but even more for the fantastic job since then with all the support!
You are the first one to provide enough information for me to identify the issue. The uninstall script removes backported drivers and restores your original ones. If you have wireless settings in MFS, tweak.sh will skip the installation of backported drivers. Obviously, you have some residual wireless settings on your system, which is causing the problem. I'll adjust the next version of tweak.sh to handle this better, but in the meantime you can fix it by removing the wireless remnants from your tivo. To do this, run network-delete.tcl, and then net-launch.sh, both in the enhancements directory.

edit: I modified the enhancement script to handle wireless remnants in MFS. Try running tweak.sh again to see if it fixes your issue.
__________________
DSR7000 x 4, HR10-250, Prom Modded R10

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
or
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by rbautch : 02-20-2007 at 12:03 AM.
rbautch is offline   Reply With Quote
Old 02-20-2007, 12:19 AM   #2321
pgaulson
pgaulson
 
Join Date: Jun 2005
Posts: 14
Opps! Now I've lost all connectivity! I did as you suggested on one of my tivos: cd /enhancements and then "tivosh network-delete.tcl" and then "sh net-launch.sh". These both seemed to run properly, and I was asked to enter my static IP and router IP addresses. There was no wireless_flag in root.

Then, I did sh tweak_uninstall.sh and then sh tweak.sh.

Here's an extracted portion of what I got when tweak ran this time:


Enter a short name for this tivo here: Three
Modifying your bash prompt with name "Three"
Do you want to add color to your bash prompt? [y/n]: n

Checking network settings...
The following IP parameters found in MFS:
IP address is currently set to: 192.168.1.64
Default gateway is currently set to: 192.168.1.1
Subnet Mask is currently set to: 255.255.255.0
DNS Server is currently set to: 4.2.2.2
DHCP is off
NO WIRELESS PARAMETERS ARE SET IN MFS

<deleted>

Appending usb.map for backported drivers...

Do you want to install USB 2.0 drivers for increased speed of
MRV tranfers and video extraction? [y/n]: y
Backing up old driver(s) to /lib/modules/backups-orig, installing new drivers...


I thought for sure this was going to fix my problem since the script was now installing drivers instead of skipping backport driver installation. But !!! Now, no connectivity at all, even with the old adapters. They do not light up at all. I did try re-booting a second time, but no change.

Can I do something using a serial cable? I do have one but have never used it, so I'll need some help with that. Or, do I now need to remove the drive and re-zipper to get connectivity again? (I still have the Zipper CD which I created Mar '06).

I did not do anything yet to my other two Tivo's, so if you want me to display any files or list the files in any directories, let me know. Perhaps this will help you determine just what led to this happening (i.e., what exactly have I done by running the latest tweak scripts on Tivo's that were zippered almost a year ago).

Let me know. Thanks!
pgaulson is offline   Reply With Quote
Old 02-20-2007, 12:32 AM   #2322
rbautch
User
 
Join Date: Feb 2004
Location: Chicago, IL
Posts: 3,628
Quote:
Originally Posted by pgaulson
Opps! Now I've lost all connectivity! I did as you suggested on one of my tivos: cd /enhancements and then "tivosh network-delete.tcl" and then "sh net-launch.sh". These both seemed to run properly, and I was asked to enter my static IP and router IP addresses. There was no wireless_flag in root.

Then, I did sh tweak_uninstall.sh and then sh tweak.sh.

Here's an extracted portion of what I got when tweak ran this time:


Enter a short name for this tivo here: Three
Modifying your bash prompt with name "Three"
Do you want to add color to your bash prompt? [y/n]: n

Checking network settings...
The following IP parameters found in MFS:
IP address is currently set to: 192.168.1.64
Default gateway is currently set to: 192.168.1.1
Subnet Mask is currently set to: 255.255.255.0
DNS Server is currently set to: 4.2.2.2
DHCP is off
NO WIRELESS PARAMETERS ARE SET IN MFS

<deleted>

Appending usb.map for backported drivers...

Do you want to install USB 2.0 drivers for increased speed of
MRV tranfers and video extraction? [y/n]: y
Backing up old driver(s) to /lib/modules/backups-orig, installing new drivers...


I thought for sure this was going to fix my problem since the script was now installing drivers instead of skipping backport driver installation. But !!! Now, no connectivity at all, even with the old adapters. They do not light up at all. I did try re-booting a second time, but no change.

Can I do something using a serial cable? I do have one but have never used it, so I'll need some help with that. Or, do I now need to remove the drive and re-zipper to get connectivity again? (I still have the Zipper CD which I created Mar '06).

I did not do anything yet to my other two Tivo's, so if you want me to display any files or list the files in any directories, let me know. Perhaps this will help you determine just what led to this happening (i.e., what exactly have I done by running the latest tweak scripts on Tivo's that were zippered almost a year ago).

Let me know. Thanks!
If you can get your serial cable working, check out /lib/modules to see if the backported modules were installed, and also check /etc/hotplug/usb.map to see if it was appending with backported driver entries. You can do the same by pulling the drive.
__________________
DSR7000 x 4, HR10-250, Prom Modded R10

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
or
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
rbautch is offline   Reply With Quote
Old 02-20-2007, 08:22 AM   #2323
pgaulson
pgaulson
 
Join Date: Jun 2005
Posts: 14
Here's what's in my other Tivo that was originally hacked with Zipper in Mar '06; I assume it's the same. What do I do to determine if backported drivers are there?

Two-bash# cd /lib/modules
Two-bash# ls
af_packet.o ircatch-atmel.o sd_mod.o
ax8817x.o ircatch.o sg.o
bcm7315tty.o ircatch_Gen04.o si9190.o
brcmdrv-7315.o isofs.o sr_mod.o
brcmdrv-rb.o kaweth.o therm.o
cdrom.o kfirm.o tivo_pwmdrv.o
cobra.o kfirm_Gen04.o tivoconfig.o
drivers2.4.20.tgz modemtty_Gen04.o tvinput.o
fan.o modemtty_Series2.o tvinput_Gen04.o
fanstub.o msdos.o tvinput_falcon.o
fat.o oslink.o ubuddy.o
fpga.o p80211.o usb-ohci.o
i2c_Gen04.o pegasus.o usb-storage.o
i2c_Series2.o prism2_usb.o usbcore.o
ideturbo.o router.o usbnet.o
irblast.o rtl8150.o vfat.o
irblast_Gen04.o scsi_mod.o vnetusba.o
Two-bash#


And, here's what usb.map looks like:

############################################################ ##################
#
# File: usb.map
#
# Copyright (c) 2002-2003 TiVo Inc.
#
# This file specifies all the kernel module and USB device information
# the hotplug manager needs to do its job.
#
############################################################ ##################


[core modules]
module usbcore debug_core
module usb-ohci debug_core needs usbcore

[peripheral modules]
module pegasus debug_core
module rtl8150 debug_core
module ax8817x debug_core
module p80211
module prism2_usb needs p80211
module vnetusba


[wired network]

device pegasus
product 0411 0001 Melco LUA-TX
product 0411 0005 Melco LUA-TX
product 0411 0009 Melco LUA2-TX
product 045e 007a Microsoft MN-110
product 049f 8511 Compaq iPAQ Networking 10/100
product 04bb 0904 IO Data USB ET/TX
product 04bb 0913 IO Data USB ET/TX-S
product 0846 1020 NETGEAR FA101
product 0506 4601 3Com 3C460B
product 050d 0121 Belkin F5D5050
product 056e 200c Laneed LD-USB/TX
product 056e 4002 Laneed LD-USB/TX
product 056e 400b Laneed LD-USB/TX
product 056e abc1 Laneed LD-USB/T
product 05cc 3000 Elsa Micolink USB2Ethernet
product 066b 200c Linksys USB10TX
product 066b 2202 Linksys USB10TX
product 066b 2203 Linksys USB100TX
product 066b 2204 Linksys USB100TX
product 066b 2206 Linksys USB
product 066b 400b Linksys USB100TX
product 067c 1001 SpeedStream USB
product 0707 0200 SMC 202 USB
product 07a6 0986 ADMtek AN986
product 07a6 8511 ADMtek ADM8511
product 07aa 0004 Correga FEther USB-TX
product 07b8 110c D-Link 110c
product 07b8 200c D-Link 200c
product 07b8 4002 D-Link DU-E100
product 07b8 4004 D-Link 4004
product 07b8 4007 D-Link 4007
product 07b8 400b D-Link 400b
product 07b8 400c D-Link 400c
product 07b8 4102 D-Link 4102
product 07b8 4104 D-Link 4104
product 07b8 abc1 D-Link DU-E10
product 07c9 b100 Allied Telesyn Int. AT-USB100
product 083a 1046 Accton USB 10/100
product 083a 5046 SpeedStream USB 10/100
product 08d1 0003 smartBridges smartNIC 2 PnP
product 08dd 0986 Billionton USB-100
product 08dd 0987 Billionton USBLP-100
product 08dd 0988 Billionton USBEL-100
product 08dd 8511 Billionton USBE-100
product 0951 000a Kingston KNU101TX
product 0e66 400c Hawking UF100
product 15e8 9100 SOHOware NUB100
product 2001 200c D-Link DSB-650TX
product 2001 4001 D-Link DSB-650TX
product 2001 4002 D-Link DSB-650TX
product 2001 4003 D-Link DSB-650TX-PNA
product 2001 400b D-Link DSB-650TX
product 2001 4102 D-Link DSB-650TX
product 2001 abc1 D-Link DSB-650

device rtl8150
product 0bda 8150 RTL8150 device
product 0411 0012 Melco RTL8150 device

device ax8817x
product 13b1 0018 Linksys USB200MV2
product 13b1 0018 Linksys USB200MV2
product 077b 2226 Linksys USB200M
product 07b8 420a Hawking UF200/TRENDnet TU2-ET100
product 0846 1040 NETGEAR FA120
product 2001 1a00 D-Link DUB-E100


[wireless network]

device prism2_usb firmware prism2
product 0411 0016 Melco WLI-USB-S11
product 045e 006e Microsoft MN-510
product 049f 0033 Compaq/Intel PRO/Wireless
product 066b 2212 Linksys WUSB11 v2.5
product 066b 2213 Linksys WUSB12
product 067c 1022 Siemens SpeedStream 1022
product 0846 4110 Netgear MA111
product 08de 7a01 Prism device
product 09aa 3642 D-Link DWL-120 rev D
product 0b3b 1601 Hawking WU250
product 0baf 00eb US Robotics 1120
product 0d8e 7a01 Prism device
product 1668 0408 Actiontec Prism2.5 Adapter
product 1668 0421 Actiontec Prism2.5 Adapter
product 1915 2236 Linksys WUSB11 v3.0
product 2001 3700 D-Link DWL-122
product 2001 3702 D-Link DWL-120 rev F
product 413c 8100 Dell TrueMobile 1180
product 8086 1111 Intel PRO/Wireless 2011B

device vnetusba firmware atmel503a
product 03eb 7603 Atmel AT76C503A-i3861 Adapter
product 03eb 7604 Atmel AT76C503A-i3863 Adapter
product 03eb 7605 Atmel AT76C503A-RFMD Adapter
product 050d 0050 Belkin F5D6050 ver 2000
product 05dd ff31 Addtron AWU-120
product 077b 2219 Linksys WUSB11 v2.6
product 0864 4100 NETGEAR MA101
product 0864 4102 NETGEAR MA101 rev B
product 0d5c a002 SMC2662W V.2 / Belkin F5D6050
product 1915 2233 Linksys WUSB11 v2.8
product 2001 3200 D-Link DWL-120 rev E


This file does look like it has all the driver entries, including for USB200M v2 (product 13b1 0018 Linksys USB200MV2) -- I don't know why that entry is in there twice or why it's not indented like the others -- might this be the problem?

Again, this Tivo will no longer recognize my USB200M v2. I'll probably pull the drive and re-zipper, since I know that will get my connectivity back. It may be several days before I get the chance, however. I'll post again to this thread when I have any update. And, I think I'll wait for your next version of tweak.sh. Stay tuned!
pgaulson is offline   Reply With Quote
Old 02-20-2007, 05:22 PM   #2324
rbautch
User
 
Join Date: Feb 2004
Location: Chicago, IL
Posts: 3,628
The backported driver entry is there, but that doesnt mean it's there for your other tivo. You'll need to check with a serial cable or pull the drive to make sure.
__________________
DSR7000 x 4, HR10-250, Prom Modded R10

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
or
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
rbautch is offline   Reply With Quote
Old 02-21-2007, 01:15 AM   #2325
bkdvr
Registered User
 
Join Date: Sep 2005
Posts: 5
backup_run.sh remounts RO before start*.sh is done

I found another issue with the enhancement scripts:

- start*.sh calls backup_run.sh
- backup_run.sh remounts / as a read-only filesystem
- start*.sh continues on assuming that / is read-write, so you get some errors because appending to rc.sysinit.author fails

Since the backup_run.sh is used in the cron jobs, it's probably easier to have start*.sh remount,rw after calling backup_run.sh.

- Benjamin
bkdvr is offline   Reply With Quote
Old 02-21-2007, 08:35 PM   #2326
pgaulson
pgaulson
 
Join Date: Jun 2005
Posts: 14
Quote:
Originally Posted by rbautch
The backported driver entry is there, but that doesnt mean it's there for your other tivo. You'll need to check with a serial cable or pull the drive to make sure.
OK -- a success story! Many thanks to rbautch!

First, I connected with a serial cable and ran “sh tweak_uninstall.sh”. Then I rebooted, after which I was able to connect (using an early adapter but not the USB200M v2).

Next, I ran “sh tweak.sh” where I find that rbautch has modified the script for backported drivers (I assume due to my problem posted earlier in this thread) and here’s what I selected for this:

Appending usb.map for backported drivers...

Do you want to install USB 2.0 drivers for increased speed of
MRV tranfers and video extraction? [y/n]: y

Wireless settings found in MFS. If you
are indeed using a wireless adapter, installing
backported drivers could break your connection.
Do you want to continue with backported drivers? [y/n]: n
Skipping USB 2.0 installation...


I could still connect with my early adapters (but not my USB200M v2). Everything was back to normal, pretty much the same as when I started.

Note to rbautch: if you want, I can PM you with a word document containing the following info from my Tivo at this point:

What appears in /lib/modules
And, what appears in /lib/modules/backups-orig
What appears in usb.map
And, what I see that’s different from this in usb.map.orig

Let me know.

Next, I ran “sh tweak_uninstall.sh” again. (Note: I see where the script states “Skipping driver restore …”; I’m not sure if that’s also new).

Finally, I ran “sh tweak.sh” only this time I opted to continue with backported drivers (hoping to enable my USB200M v2). And -- success! I can still connect, plus I now can also do so with my USB200M v2. Hooray! Original problem solved! Many thanks!

I have already repeated the uninstall/reinstall on another of my Tivo's, and verified it also now connects with my USB200M. Soooo ... whatever rbautch changed in his tweak script has worked for me; hopefully, there might be others who will also benefit with the connectivity improvements for their "early" zipper version Tivo's when they uninstall/reinstall tweak in order to get all the latest enhancements available.
pgaulson is offline   Reply With Quote
Old 02-21-2007, 11:32 PM   #2327
sk33t3r
Registered User
 
sk33t3r's Avatar
 
Join Date: Jul 2003
Location: Houston, TEXAS
Posts: 498
I neve had any issue with my usb200m v2 with zipper
__________________
HDVR2 282 hrs, zippered
HDVR2 107 hrs, zippered
DSR7000 220 hours, zippered
HR21-200
HR20-100
DRD420re
sk33t3r is offline   Reply With Quote
Old 02-22-2007, 12:40 PM   #2328
rbautch
User
 
Join Date: Feb 2004
Location: Chicago, IL
Posts: 3,628
Pgaulson identified the issue to be residual wireless settings in MFS, which caused the script not to install backported drivers. I modified the script to allow you to give you the option to force the installation of backported drivers regardless of wireless settins (see above), which fixed the issue. I believe this will eliminate all the "I ran tweak.sh and lost my connection" reports.
__________________
DSR7000 x 4, HR10-250, Prom Modded R10

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
or
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
rbautch is offline   Reply With Quote
Old 02-27-2007, 03:26 PM   #2329
dcbarry
Registered User
 
Join Date: May 2002
Posts: 66
Hr10-250 6.3b and 6.3c

Rbautch:

Just thought you might want to update your root post on the thread here to address the status of 6.3b/6.3c. THe current post refers to 6.3a.

CHeers,

d.

Last edited by dcbarry : 02-27-2007 at 03:27 PM. Reason: Title Correction
dcbarry is offline   Reply With Quote
Old 03-01-2007, 07:54 PM   #2330
buckeyebob
Registered User
 
Join Date: Oct 2006
Posts: 2
model tcd 540080 ?

I found a Tivo series 2
Model TCD 540080 need to know if it will work with Pansat 3500
and does it take codes or what to get it going.

thanks
buckeyebob is offline   Reply With Quote
Old 03-01-2007, 08:22 PM   #2331
rbautch
User
 
Join Date: Feb 2004
Location: Chicago, IL
Posts: 3,628
Quote:
Originally Posted by dcbarry
Rbautch:

Just thought you might want to update your root post on the thread here to address the status of 6.3b/6.3c. THe current post refers to 6.3a.

CHeers,

d.
Thanks, fixed.
__________________
DSR7000 x 4, HR10-250, Prom Modded R10

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
or
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
rbautch is offline   Reply With Quote
Old 03-02-2007, 09:17 PM   #2332
juzzie
Registered User
 
Join Date: Feb 2007
Posts: 29
EndpadPlus feature

Sorry if I'm asking it in a wrong place, but I have a question about enpadplus feature installed by zipper with enhancement script.

When I check with "ps" command in telnet session, the endplus is running. What seems strange to me is that there are both "endpad.tcl" and "endpadplus.tcl" in my /enhancements directory. The author file is launching only endpadplus. Is it OK or should I also add a command to launch endpad.tcl?

Forgive me if it's a dumb question, but is this enpadplus feature accessible only from tivowebplus interface? I don't see a separate tab or options window to configure this feature. The only place that adjusts padding (adds time to the start/stop recording) is the Channel Grid tab after I select a channel and title to record. Over there is the drop down menu where I can add some time to the biginning and end of the recording. Is this it?
juzzie is offline   Reply With Quote
Old 03-02-2007, 10:46 PM   #2333
rbautch
User
 
Join Date: Feb 2004
Location: Chicago, IL
Posts: 3,628
Quote:
Originally Posted by juzzie
Sorry if I'm asking it in a wrong place, but I have a question about enpadplus feature installed by zipper with enhancement script.

When I check with "ps" command in telnet session, the endplus is running. What seems strange to me is that there are both "endpad.tcl" and "endpadplus.tcl" in my /enhancements directory. The author file is launching only endpadplus. Is it OK or should I also add a command to launch endpad.tcl?

Forgive me if it's a dumb question, but is this enpadplus feature accessible only from tivowebplus interface? I don't see a separate tab or options window to configure this feature. The only place that adjusts padding (adds time to the start/stop recording) is the Channel Grid tab after I select a channel and title to record. Over there is the drop down menu where I can add some time to the biginning and end of the recording. Is this it?
Endpadplus is for dual tuner directivos. Endpad is for single tuner standalones.
__________________
DSR7000 x 4, HR10-250, Prom Modded R10

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
or
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
rbautch is offline   Reply With Quote
Old 03-02-2007, 11:10 PM   #2334
juzzie
Registered User
 
Join Date: Feb 2007
Posts: 29
Quote:
Originally Posted by rbautch
Endpadplus is for dual tuner directivos. Endpad is for single tuner standalones.
I have Directv tivo samsung 4040r which is dual tuner. So endpadplus is the right thing to run.

Can you please shed more light on my other question on where to access and how to control that feature? Thanks.
juzzie is offline   Reply With Quote
Old 03-03-2007, 02:03 AM   #2335
FedEx
Registered User
 
Join Date: Mar 2007
Posts: 1
I have 3 standard definition receivers on a wired network all of them are working great. Only thing I really care about is the MRV feature. I just installed 6.3 download on my HR10-250 and all went well till I tried the MRV. The now playing list shows the 3 other standard definition receivers but shows a empty now playing list. Those receivers do not even see my HR10-250. Is it true that MRV is not capable on the HR10-250. IF it is can you please direct me in the right direction to make this work.
FedEx is offline   Reply With Quote
Old 03-03-2007, 02:41 AM   #2336
Lord Vader
Dark Lord ofthe Sith
 
Lord Vader's Avatar
 
Join Date: Aug 2004
Location: The Galactic Empire
Posts: 1,087
Correct. MRV is not possible on the HR10-250. Check out the other forum for info on MovieLoader.
__________________
Peace is a lie, there is only passion. Through passion I gain strength. Through strength I gain power. Through power I gain victory. Through victory my chains are broken. The Force shall set me free.
Lord Vader is offline   Reply With Quote
Old 03-03-2007, 04:53 PM   #2337
aepman
Registered User
 
Join Date: Oct 2000
Location: Grayson, KY, USA
Posts: 167
I'm having a problem getting the script yo complete over a wireless connection. I've got 4 hacked Directivo units. I zippered and enhanced them last in December of 2005. Recently I noticed /var had gotten wiped. I installed TWP and was not too concerned.

With the release of 6.2a, I decided I would rerun the enhancement script and get everything working before running Slicer to upgrade. Everything thing went like clockwork on the 3 wired units. However, I am running into problems on the wireless one.

The script downloaded and ran the uninstall script without any problems. It then proceeds to download the new files, again without any problems. In fact, everything goes fine until it checks the network settings. It checks them fine and reports back correctly, but it stops at that point. The last thing it displays is that WEP is disabled. The curser just sits on the next line blinking. I do not loose my connection. I can ftp to my box and can telnet back in. If I rerun the script, everything goes fine until this same point.

Anyone have any suggestions?

Todd
aepman is offline   Reply With Quote
Old 03-03-2007, 06:42 PM   #2338
aepman
Registered User
 
Join Date: Oct 2000
Location: Grayson, KY, USA
Posts: 167
Never mind. I'm not sure what happened, but I noticed on the time stamps that ifconfig was copying to /sbin every time I ran the script. However, /enhancements/ipaddress_flag still had the time stamp from my 1st attempt. Since I was fairly sure my network would still be working, I rebooted the TiVo. When it came back up, the script ran without a problem.

Todd
aepman is offline   Reply With Quote
Old 03-04-2007, 05:15 PM   #2339
oldhack
Registered User
 
Join Date: Oct 2003
Location: sun valley CA
Posts: 5
maybe

Quote:
Originally Posted by buckeyebob
I found a Tivo series 2
Model TCD 540080 need to know if it will work with Pansat 3500
and does it take codes or what to get it going.

thanks
if youre talking about a stand alone then maybe. get an IR blaster and put it on the pansat. In setup choose hughes reciever and see if it will work.If your 3500 doesnt have a hughes code in it, it may not work.
it works with the pansat 2500a fine. If you have any more questions about it, you should go to a site thats better suited for pansats. google FTA sites.
good Luck
oldhack is offline   Reply With Quote
Old 03-06-2007, 05:13 PM   #2340
jaxgent
Registered User
 
Join Date: Sep 2004
Posts: 14
Buyer beware that the Belkin FD5050 is a ver 1.0 USB unit and slow as molasses. Nowhere on the box did it mention this. Top thruput from my Tivo to the PC 0.52 megs a sec!

Return not possible, threw out the box prior to testing.
__________________
jaxgent
Jacksonville, FL
jaxgent is offline   Reply With Quote
Reply
Forum Jump




Thread Tools


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Advertisements

TiVo Community
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Skins by: Relivo Media

(C) 2013 Magenium Solutions - All Rights Reserved. No information may be posted elsewhere without written permission.
TiVo® is a registered trademark of TiVo Inc. This site is not owned or operated by TiVo Inc.
All times are GMT -5. The time now is 11:18 PM.
OUR NETWORK: MyOpenRouter | TechLore | SansaCommunity | RoboCommunity | MediaSmart Home | Explore3DTV | Dijit Community | DVR Playground |