1. Make sure the USB receiver is plugged into the USB port on the back of the TiVo DVR.
NOTE: To use the optional USB extension cable, plug the male end of the cable into a USB port on the DVR, plug the USB receiver into the female end, then place the USB receiver near the front of the DVR.
2. On the TiVo Slide remote, press and hold the TiVo button and the blue "B" button simultaneously. When the activity indicator light blinks blue, release the buttons.
3. On the USB receiver, press and hold the button until the LED starts blinking.
4. After a few seconds, the remote's activity light will blink rapidly 5 times and then go off if pairing is successful. If pairing is unsuccessful, repeat steps 2 and 3.