Need an image? PM me for a ftp site.

[jwkilgore]

drive finally died after 3 months of stuttering. anyone have a link to the image?

please pm me.

Thanks in advance.

[destinydog]

Has anyone actually rec'd a requested image from this thread recently?

Just want to know if there is still life in this thread or if I should look elsewhere for a HDR312 image....

DD

[DAR748]

Nope its dead the guy doesnt reply
If you need a image that I have (search my posts) i'll be happy to upload it give you access to my ftp.

[drfence]

Can someone pm me ... I need a drive image for a TCD24008A Series 2 Stand Alone.

Thanks!

[jhatfield]

ok, I need an image for a Philips 312 (series 1)

Thanks

[scorp508]

I may need a TCD24004A image for v8.3-01-2-140

Thank you in advance!

[evilwise]

I'm looking for an image of at least version 3 to put on a fresh hard drive for an original Phillips HDR112 stand alone generation 1 TiVo. Hacked would be great to save me some time but factory is fine too. Beggars can't be choosers!

[ghilz]

looking for a factory Toshiba RSTX-20 image, thanks.

[pofolk]

I recently had a hard drive crash and need to get a hold of a Pioneer 810H image. Thank you in advance for any assistance.

[klyde]

I have a Hughes Direct TV SD-DVR 40 that I put an 80GB hard in some time ago. I put an image on that stopped the no call nag since I cant use a phone line and it also had a no software update on it. Now I want to update the software to get some of the latest additions, so I guess the best way is to get another image and put up with the no call nag. Can you supply me with a link?
thank you

[bengalfreak]

Since images are now readily available for $20, this thread is no longer replied to.

[dofni]

I recently had a hard drive crash and need to get a hold of a Pioneer 810H image. Thank you in advance for any assistance.


I had the same thing happen to my Tivo. Any info on an image for this machine.

Thanks,

[whitepelican]

I have a Hughes Direct TV SD-DVR 40 that I put an 80GB hard in some time ago. I put an image on that stopped the no call nag since I cant use a phone line and it also had a no software update on it. Now I want to update the software to get some of the latest additions, so I guess the best way is to get another image and put up with the no call nag. Can you supply me with a link?
thank you

There's a very simple solution for anyone searching for an image for an Series2 DirecTivo. I posted about it over here. (http://www.tivocommunity.com/tivo-vb/showthread.php?p=5121877&&#post5121877)

[klyde]

Thanks, someone pm'ed me the same day and I got a new image

[rsmoker]

I'm looking for an image to fix my dead Tivo Series 2, Model# TCD24004A. Can anyone help me out?

EDIT:
I tried using the Drez image, but it appears to be for DirectTV. I'm not sure if it makes a difference, but it won't let me through the setup without connecting via telephone. Sorry, it's been a long time since I set the Tivo up originally, so I would never remember if this is similar to the original setup process.

EDIT2:
Okay, so the default DirectTV image does not support the USB and/or networking as a means to obtain data. I don't think it matters, because I don't think I could have used the DTivo image since I go through Comcast cable and have a lifetime sub directly with Tivo. Anyway, I spent the cash on buying the cake because I'm impatient. Seems to have worked so far, but I hate that I had to spend money. :(

[puffdaddy]

*never mind*

[3vil3ric]

I'm looking for an image for a 140060. Can anyone help me out?
Thanks
3vil 3ric

[clyderowjenkins]

I am looking for an image for a RCA directivo dvr40. Please Pm me.

[Da Goon]

I am looking for an image for a RCA directivo dvr40. Please Pm me.
See WhitePelican's post 5 posts above yours.

[doppler1]

My drive died while I was out on vacation -- looking for an image for a TCD-540040.

Thanks in advance!

[drflash]

My 80 GB hard drive failed on my Series 2 Tivo.

Any help getting an image would be greatly appreciated.

[cr33p]

My 80 GB hard drive failed on my Series 2 Tivo.

Any help getting an image would be greatly appreciated.

A model number would help in determining what image it is that you seek :)

[drflash]

Sorry,

The model number from the back panel is:

TCD240080

Thanks in advance

[drflash]

I ended up buying instantcake and could not be happier. From burning the CD to having the Tivo booting took less than 1/2 an hour.

My Tivo is now in the process of loading the program guide data for Dish network. That should take a couple of hours at least.

I highly recommend instantcake.

[cr33p]

I ended up buying instantcake and could not be happier. From burning the CD to having the Tivo booting took less than 1/2 an hour.

My Tivo is now in the process of loading the program guide data for Dish network. That should take a couple of hours at least.

I highly recommend instantcake.

Glad it worked out for you

[zordude]

Anyone have an image for a Series 2 Humax T800?

Z

[TK421]

Anyone have an image for a Series 3? Original drive is on its last legs, can't get it to stay happy long enough to copy using MFSTools.

TIA

[takebackberlin]

so i found a toshiba sd-h400 in the trash the other day... works great except i need to figure out the password so i can revamp the unit.... i guess the image is my last resort.... does anyone have a working image for this unit???

[magnus]

Just do a clear and delete everything... that should remove the password.

so i found a toshiba sd-h400 in the trash the other day... works great except i need to figure out the password so i can revamp the unit.... i guess the image is my last resort.... does anyone have a working image for this unit???

[HomeUser]

Anyone have an image for a Series 3? Original drive is on its last legs, can't get it to stay happy long enough to copy using MFSTools.

TIA Put the old drive in a plastic bag in the top part of the fridge overnight (ice box may be to cold) the cold drive should run at least long enough to make the a backup image without recordings. Be sure to have a drive formated with a FAT32 partition ready in the PC to save the image to. (And use the MFSLive CD)

[Da Goon]

Just do a clear and delete everything... that should remove the password.
If your tivo is password protected, you'll have to enter the password before it will allow you to do a C & DE. Reimaging requires no such password :D

[magnus]

aw, crap that is right. sorry about the bad post.


If your tivo is password protected, you'll have to enter the password before it will allow you to do a C & DE. Reimaging requires no such password :D

[ChrisNYC]

Long story, but I need an image for a Series 2 240080 so I can image a new 500gb drive.

Can anybody help me out? Thanks.

[Grezdfez]

I am distraught. My lifetime subscription TCD24004a started stuttering and refuses to give up a working image. Please, could someone PM me with how I might go about saving my precious?

[AZ_Tivo]

I need image for TCD540040. Where can I get that? Thanks.

[ham00700]

I need an image for my Hughes SD-DVR40 Tivo... anyone know where I can get that from ?

Thanks...

[cr33p]

I need an image for my Hughes SD-DVR40 Tivo... anyone know where I can get that from ?

Thanks...
I have a RCA DVR40 image. PM me

[adrenalinepcdj]

Can Someone PM me information for a Phillips DTV DSR7000 image. I bought from a friend and i think the Hard Drive is Corrupt. Just wanna use it for media storage for the kids
Thanks

[cma371]

Need image for SD-H400

[ciper]

Instead of spending so much bandwidth on these images why not create a torrent for them?

Oh and I am interested in an image from an SVR-2000

[sparkz]

Instead of spending so much bandwidth on these images why not create a torrent for them?

Oh and I am interested in an image from an SVR-2000
Me too. Please someone help.

[Limedrink]

I'm looking for a 7.x image for my TCD240xxx.

Please PM.

[DonDon]

Hi, I just purchased an HR10-250 off of ebay, and I am going to install a clean drive, and wanted a clean image to install on the new drive, since the seller said it was locking up about once a week. So if someone could help me out with a version 6.X HR10-250 image, that would be much appreciated.

Thanks

Don

aka DonDon

[AZ_Tivo]

Looking for TCD540040 image. Thanks.

[redracer]

Hey all, Just got a handme-down semi-functional Humax DTR800 with built in DVD burner. He tried to upgrade it to a larger drive but corrupted the image. So, i need to get my hands on the original image.

Any Help would be greatly appreciated.

Thanks!

Robert

[jangelj]

I need an image for a Toshiba RS-TX20...please...
My HD crashed completely and I cannot recover even via dd_rescue.

Thanks,
John

I got a PM from someone...thanks anyway!

[GarySheehan]

My Hughes HDVR2 just crapped out. Getting input/output errors on the drive using MFS Tools. I'd rather just image a new drive. Any help would be greatly appreciated.

[cbelcher]

Lifetime subscription Sony died - I need an SVR-2000 image please. PM me.

[raiders]

My Hughes HDVR2 just crapped out. Getting input/output errors on the drive using MFS Tools. I'd rather just image a new drive. Any help would be greatly appreciated.


Also need an hdvr2 image, as I have a 3.5 based hdv2 that does not seem to want to upgrade to 6.3 as it is stuck on powering up screen and it indicated it was trying to upgrade.

[tivoboy]

so, in the same boat, seems a LOT of HDVR2/3 are crapping out. I just tried to do the A to NEW A copy with dd_rescue, but that didn't seem to take. I need to get an image of any type to make a new drive.


any help for image locations please. Maybe a third party site?

thanks
tb

[Halusha]

My HR10-250 just started the Green Screen of Death rebooting cycle. Does anyone have a 6.x HR10-250 image I could use to image a new drive for it?

[Thos19]

Hi,

I need an image for a Series 2 Model 240XXXXXX. Preferably with the most recent software release.

Thanks!

Thos.

[JimShews]

My lifetime subscription Phillips HDR112 Series 1 died. I need the Phillips_HDR112_3.0 image. Please PM me with information. Thanks in advance.

[Da Goon]

My lifetime subscription Phillips HDR112 Series 1 died. I need the Phillips_HDR112_3.0 image. Please PM me with information. Thanks in advance.
Emule is your friend. http://www.emule-project.net/home/perl/general.cgi?l=1

[Rapierky]

so, in the same boat, seems a LOT of HDVR2/3 are crapping out. I just tried to do the A to NEW A copy with dd_rescue, but that didn't seem to take. I need to get an image of any type to make a new drive.


any help for image locations please. Maybe a third party site?

thanks
tb


Boat is getting crowded. My Hughes HDVR2 downloaded an update and got hung up on the install. DTV says it'll be 2 weeks to get a tech out here in the sticks. I got a new drive, just need an image. :)

Any help would be appreciated. Heck I can even host it for a while if need be.

[staufj22]

Boat is getting crowded. My Hughes HDVR2 downloaded an update and got hung up on the install. DTV says it'll be 2 weeks to get a tech out here in the sticks. I got a new drive, just need an image. :)

Any help would be appreciated. Heck I can even host it for a while if need be.

Need an HDVR2 Image here as well. Any help would be greatly appreciated. I can host as well.

[whitepelican]

Need an HDVR2 Image here as well. Any help would be greatly appreciated. I can host as well.

See my post #763 in this thread.

[Rapierky]

See my post #763 in this thread.

Thanks for the hook-up!

[kittie2171]

I need an image for my Hughes SD-DVR40 Tivo... anyone know where I can get that from ?
Does anyone know for sure if the RCA DVR40 would work

[GoZO]

I need image or compatible image for TCD140060

The rapidshare post is dead.

Thanks.

[zilya]

Need an image for Toshiba sd-400. Any help is appreciated. Thanks.

[Bosstone74]

I am in need of an image for the tcd540040. If you can help slap me a PM, thanks much!

[mostafat]

I need a backup image for TCD24008A Please PM me.

[Carlton Bale]

msftafat: check your PM.

[sam1977]

My hard drive failed. Where can I find the image? Thanks

[whitepelican]

My hard drive failed. Where can I find the image? Thanks

Here. (http://www.tivocommunity.com/tivo-vb/showthread.php?p=5473173&&#post5473173)

[Bosstone74]

It's tough to find them...just wait...they will come.

[cr33p]

Looking for a image for an S3 classic PM me if anyone has one.

Thanks

[bhang]

iso, these images

ptv100
tcd24008a

thanks

bhang

[loboadmin]

Anyone got an ISO image for a TCD140060?

PM me.

PLEASE.

Thanks.

[Gultig]

Anyone know where I can find a dsr6000 image?

My HD went to the great gigs in the sky.





(Wow! Only 30 posts? Someone must have stolen some zeros.)

[rock711]

Does anyone have an image for TCD24004A?

Thanks!

[Carlton Bale]

S3 Classic: can't help
ptv100: can't help
TCD140: can't help
TCD240xxx: PMs sent
DSR6000: PM sent

[cr33p]

Thanks

[Da Goon]

TCD140: can't help
TCD240xxx: PMs sent
140 and 240 tivo's run the same software.

[ndenial]

My Toshiba rs-tx20 hard drive is failing and while i hope it will survive me copying it to a new hard drive, I was looking for a rs-tx20 image file just in case. Please pm me.

Thanks!

[conleymichael]

In my ignorance, I formatted my hd and did not save my image. I need an image for a TDC240140. I think I have the process down, I just need an image now.

[cheshy]

Anyone have image for TCD140060?

Thanks!

[The_Frapster]

I need an image for a TCD540040 please....


Thank you

[cellphoneben]

So sad. Anyone have an image so I can resurrect my little friend?

[DocChaos]

So sad. Anyone have an image so I can resurrect my little friend? (SVR-3000)

I second that. I have been putting off replacing it's hard drive. It is starting to run slow, and need a reboot once every week or two...

Thanks for any help...

[dumbdiety]

My hard drive died over the weekend (RIGHT BEFORE THE NEW SEASON! ARGH!).
Anyway, I can't get a good image off the old drive. Can someone please PM me with a location to d/l an image for a Series2/DT? Thanks in advance!

[MisterUCLA]

Anybody have an image for a GXCEBOT? That's a Series 1 DirecTiVo.

Thanks,
Eddie

[Carlton Bale]

My hard drive died over the weekend (RIGHT BEFORE THE NEW SEASON! ARGH!).
Anyway, I can't get a good image off the old drive. Can someone please PM me with a location to d/l an image for a Series2/DT? Thanks in advance!

Need the model number. There are many different series 2 TiVos.

[Chef Parm]

I'm looking for an image for RS-TX60. If you have one or know where I can find one, please let me know. Thanks so much.

My drive is totally shot and the wife is starting to go crazy.

[askjack2004]

I need an image for an old Phillips PTV100. Can anyone help. Most of the sites
referenced in the fourm are no longer there. Thanks.

[swspjcd]

Wow am I having a crappy week. The hard drive died in two of my 3 tivo boxes. Looking for an image for a HR10-250 and for a HDVR2. I tried sending a pm to StanSimmons but apparently his message box is full and not accepting anymore messages. Does anyone else have an ftp? P2P networks are painfully slow and extremely unreliable.
Thanks for any help you can provide.

[freeze12]

I desperately need an image for a: Toshiba RS-TX20

Please! Thanks,Dan

[klgood1]

My friend's lifetimed Humax T800 is on the fritz, and I'm not sure if I'll be able to pull an image off the existing hard drive. Anyone have one? Thanks in advance.

[loboadmin]

Carlton,
Thanks you so much for your advice. My TIVO is back among the living.

THANK YOU!!!!!!

Mark

[crackahcrackah]

I PM'd Stan for a tivo image and haven't heard back from him. Can you tell me where to get an image for a Tivo Series 2

model: TCD24004A

Any help would be greatly appreciated!

[MadManny]

Hi, TIVO just died. Can someone please let me know where to obtain the image file for the Tivo Series2 model 540. TIA.

Manny....

[jmw86069]

Standalone Tivo, model TCD240080, anyone? :-)

Thanks in advance!

[kabewm]

Hi, TIVO just died. Can someone please let me know where to obtain the image file for the Tivo Series2 model 540. TIA.

Manny....


I need the same image. Please PM me with the ftp site as well.

[rtbunker]

I need the same image. Please PM me with the ftp site as well.
Count me in for the 540 image. Thanks!

[mpm980]

Im in need of an image for TCD540040. Any help is highly appreciated :up:

[cr33p]

Anyone still needing a 540 image?? pm me.

[crackahcrackah]

Can you tell me where to get an image for a Tivo Series 2 model: TCD24004A ?


Help would be greatly appreciated!

[rhk0327]

Need an image for a Sony 35hr Sat-T60 DirecTiVo. Thanks much.

[cole46_51]

hello, i need an image for a Hughes SD-DVR40 DirecTiVo, preferably 6.1 as that's what the original was, but 6.2 would be fine to, but I don't really want 6.3 as i have read nothing but bad things about it.

i do have a image for a R-10, would this work?

[whitepelican]

hello, i need an image for a Hughes SD-DVR40 DirecTiVo, preferably 6.1 as that's what the original was
The SD-DVR40 never had version 6.1, that was only for the R10.

but 6.2 would be fine to
Then you're in luck, see post #763 in this thread.

I don't really want 6.3 as i have read nothing but bad things about it.
I agree. 6.3 isn't terrible, but 6.2/6.2a were much more stable.

i do have a image for a R-10, would this work?
No, it won't.

[mdiesel]

someone please PM me an image for a standalone TCD 540140

Thanks

[threxel]

Hi Guys,

Please PM me the ftp info for a DTV R10 80g Image please. Not having any luck finding it the way I would have a few years ago.
It would be greatly appreciated.

[dmarch]

Help! TCD24004A image needed.
Minimal image better, serial already enabled.. best!
...but anything is better than my current situation...
Please PM me...
TIA,
Dave

[gerbil42]

My TCD240040 is stuck at "Please wait, just a few minutes more" after being power cycled during a Service Update. Does anyone know where I can get an image for this unit? Please PM me.

[swspjcd]

Any chance someone has an image with 6.3x for a HDVR2? Or a link to the 6.3x slices? I'm having a heck of a time getting networking working on my HDVR2 with 6.2 installed and I know 6.3e has much better networking support.
Thanks.

[nexusplexus]

Can someone PM how to get an image to Philips_DSR6000 ?
my directtivo has the green screen of death.

Thanks a bunch.

[Weege]

Help! TCD540080 image needed. My Tivo started clicking and it seems unresponsive as a backup now.

Thanks for the help.

[99ELWpg]

Any chance someone can pm me a link to a HDVR2 image? Hard drive has failed in mine and I want to reinstall to a new HD.

Thanks

[warrensomebody]

I'd like to find an image for a DirecTV R10 unit. My parent's disk died, and it's all on my shoulders. :-) Thanks,

[Pantoot]

His pm box is full, anyone have an image for the HR10-250? My disk just took a dive.

Thanks.

[lectric]

His pm box is full, anyone have an image for the HR10-250? My disk just took a dive.

Thanks.
I tried to do the PM thing for my 24004a as well, same response, box full... I wonder how many requests he gets a day? That would certainly get old FAST!

[schalliol]

My T800 Series 2 Humax TiVo is stuck on the Powering Up screen, does anyone have an image that works with this unit?

[Keith Mickunas]

Can anyone help me find a Phillips_HDR112_3.0 image? Thanks.

[cr33p]

Looking for a Sat T60 image hoping someone can pull through and hook me up.

[glg]

anyone got a 140060 image?

[HUGE2U]

I just did a clear and delete to clean up my box, and what do you know - I erased all my hacks. Yes, I know...

Anyway, I could use and image for the HR10-250.


Thanks,


HUGE

[rdavisson]

I'm looking for a TCD540040 image. My unit died and I'm going to put in a new hard drive, but don't have a backup to restore from.

Thanks

[cr33p]

Sorry to inform anyone looking for a 540040 image but I am no longer running my FTP, the eyes in the sky are looking down on me if you know what I mean.

[rdavisson]

I'm still looking for a 540040 image. I just need the image (not instant cake or anything like that). Can anyone help? Please?

[RoundBoy]

Looking for a TDC2400040 Stand alone series 2 image...

[RoundBoy]

Got one that will work, thanks all. I need to resore again, as i forgot the -x option... now I have 0 recording time.

Nobody makes backups of >7.22 ? Or is everyone storing them in a safe place ? :)

[geowar]

Friend of a friend's SVR-2000 died. Need an image I can restore to a 160 GB (LBA48). PM please? TIA.

[rcobourn]

Folks, Emule is your friend.

[Nitar]

Hello,

My hard drive crashed bad, and I can't pull anything off of it. I need an image for a TCD24008A

Thanks!

[newyork77]

Drive Crash....anyone have a miracle?
I'm looking for an image for a TCD540040 Series 2 Stand alone.

[jonbeck7]

Looking for Phillips_HDR312_2.01 if anyone could PM me with help where I can get it.

[Nsane77]

any help will be appreciated

[edm18]

Does anyone have, or know where I can find an image for a Toshiba RS-TX20? the HD is going bad, and I would like to install a new HD before it fails. thank in advance for any help

[Mr Pieces]

My sisters Philips Model PTV300 (HDR31202) Series 1 Stand Alone TiVo just died (Hard drive) and I need an image for it. I will be putting in a 200gb drive if that is possible. Please help!

Thanks,
Brian

[johngwa]

newby here... just curious

[cneames]

Anyone have an image for Hughes HDVR2?
Thanks in advance.

[Strilo]

I would like to re-image the drive from a Humax T800 TiVo. Is this possible? Is there an image out there for a Humax t800? Thanks!

[Enrique]

Anyone have a image for a Samsung SIR-S4080R?

[whitepelican]

Anyone have an image for Hughes HDVR2?
Thanks in advance.

Anyone have a image for a Samsung SIR-S4080R?

Look here. (http://www.tivocommunity.com/tivo-vb/showthread.php?p=5121877&&#post5121877)

[Enrique]

Look here. (http://www.tivocommunity.com/tivo-vb/showthread.php?p=5121877&&#post5121877)Thanks, I just reimaged the HDD only took a few secs. :up:

All working Thanks.

[jaysterl]

Hi, I'm new here and have read a lot of the forum posts. I have a Phillips HDR31202 with dead hard drive, I need an image file for a Phillips HDR31202.
Tried to pm Stan but inbox is full. Any help in finding the file is appreciated.

[rbtravis]

Hi, I'm new here and have read a lot of the forum posts. I have a Phillips HDR31202 with dead hard drive, I need an image file for a Phillips HDR31202.
Tried to pm Stan but inbox is full. Any help in finding the file is appreciated.If you can't get Stan then a version of Instantcake from www.Dvrupgrade.com is available for $19.99. I do not know of any other alternatives. Good Luck :)

[Enrique]

Does anyone have a backup image for a DT Tivo TCD649080?

[rbtravis]

Does anyone have a backup image for a DT Tivo TCD649080? Yes DVRupgrade will sell it to you.
http://www.dvrupgrade.com/dvr/stores/1/category.cfm?SID=1&Category_ID=5&page=cat&ModelID=93

[partzs]

Stan your box is full and was trying to send you a pm. :(

[Da Goon]

Stan your box is full and was trying to send you a pm. :(

His PM box has been full for a LONG time. Post your model number and maybe someone will be kind enough to help you out. Or go to dvrupgrade.com and get an image for $20.

[FLCLcowdude]

Need an Image for a Tivo Standalone TCD540080.

Please help!

[moogoo112]

anyone have a link for humax t800 image?

[Dramaman]

Hoping someone had a tivo image for a pioneer 57H
pm me.. I do have a ftp server up with a few other tivo images and some other stuff.

[bigguy2]

Hi Gang,
anyone have an image for a Toshiba RS-TX20? My drive died and now need an image. Thanks.

bigguy2

[c-surfer]

I could really use a Series 3 image so I can fix my busted drive.

[Dramaman]

willing to trade images for anything I don't have
I have
tcd140060
tcd240080
tcd540040
tcd649DT
Pioneer 57h
Sirs-6.2-01-2-381
hdvr2-3.1.1e
ptvnet62
ptvnet311e
HDR112
Sat T60
DSR7000
DSR704
HR10-250
R10
SDDVR40
DSR6000

[Need2learn]

Could someone post or PM me where I could get a virgin "TIVO 3" image
hard drive is gone.


Thanks in advance

[rbtravis]

Could someone post or PM me where I could get a virgin "TIVO 3" image
hard drive is gone.


Thanks in advance
Order Instantcake from www.DVRupgrade.com it costs $19.99 and is well worth the cost. Stan's mail box is full and he does not appear to be making images available any more.

[bigguy2]

Thanks, Guys. Got my image.

[chaogui]

Hello,

I need the image for a Toshiba RS-TX20 series 2 standalone. The drive gave up after about two years.

I also need the image for a TCD540040 series 2 standalone. Any help will be greatly appreciated!

[eziemann]

Looking for a S2 130 (AT&T-Comcast) image with LBA48 kernel. I have a 7.1 image but no phone line anymore so it is stuck in initial guided setup.
thanks

[dcahoe]

Looking for a TDC2400040 Stand alone series 2 image...

Looking for the same. I have a TCD240080 image and my drive has died, I have an unused 80Gb drive sitting around, but when I try to restore it says not enough space. I think the true byte count of my new 80Gb is slightly smaller than the original 80Gb in my TiVo that I made an image of.

So I need a TCD240 40Gb or minimal image.

[quoc]

Need Sony SVR-2000 image for dead drive. Tried eMule, but nothing. Anybody?

[Haxx]

Anyone have an image of a TCD24004A. This is for a TiVo that was last at 8.3 if that matters. Thanks.

[CrashHD]

Does anyone know where to find 6.1a slices? Thanks.

[zdude1]

Anyone got an HR10-250 image they can throw my way? My drive crashed just as I was trying to get a copy of it made....

Thanks,
zdude1

[randyo]

Also in search of a TCD240 image. Would be very appreciative if you could point me to a copy.

[zdude1]

Anyone got an HR10-250 image they can throw my way? My drive crashed just as I was trying to get a copy of it made....

Thanks,
zdude1

Thanks for the responses!
Got it, and it's back up and running.

zdude

[mtcabral]

Hello, I mistakenly overwrote my tivo.bak file and now my primary drive is dead. Can you possibly point me to a starter image I can use for a new drive? My model is S2 TCD540040.

Thank you!

[deshwasi]

i am also in need of a Toshiba RS-TX20 image. dusted off my unit after 6-months and the drive seems to have developed a problem. cant backup using any of the backup tools. would appreciate any help with an image.

[mtcabral]

All set here with my request above. I went with Instant Cake, $20 well spent. Drive was re-imaged in < 5 min, followed by CLEAR/DELETE EVERYTHING, then re-run of GUIDED SET UP. Piece of, well, cake!

Thanks!
Mike

[ridedc]

Are images still being provided thru this post? Hope so, i'm in need of a full image for a TCD24004A system. thanks in advance!

[scott85213]

Anyone have a tcd240080 image I could get my hands on?

Thanks

[storm1n]

Toshiba SD-H400 anyone?
Thanks

[sharp1]

I would be grateful for an image of SD-H400. My son has a Rankin-Bass Christmas DVD stuck in there, and I am trying to hold off him using a screwdriver to pry the thing out of there.

Thanks in advance.
-Neil

[raddogz]

I am looking for an image of a TCD140060, anyone?

[cooltv222a]

Hi,

I have the Hughes HD 250, but the HD crashed and I do not have a backup. Does anyone still have the FTP site that Stan used to run, or is still running?

Do you have to use the HD 250 image for this Tivo, or can any Tivo HD image work?

[gatekeep]

Looking for a TCD140060 instantcake image.
Thanks

[rvnap]

I need an image for HR 10-250: I have tried to make bkup
of orig. drv(using the correct versions of PTV& tiger's Boot CDs,using all the correct commands& drives jumpered,identified correct,&I get"scanning source drive, wait a moment" It scans the drive for up to 5 hrs & stops ).
Only have 1 two hr recording on drv!--I have made several good backups & restores, of DVR-Sd40s& would like to have a bkup of this drv.If someone can help-please do,
I would also like to know where to get an image .
Thanks,
rvnap

[hyperfire21]

Can anyone help me out with a Humax drt800 image? i really need it as i think my hard drive has failed. hopefully nothing else has gone wrong with it. I really need the image so i can test it out. Contact me any time. thanks so much

[69CamaroRSSS]

Can anyone help with an image for Hughes GXCEBOT? Thank you in advance for your help!

[danail5]

Hi everyone,
I recently picked up a philips ptv100 (hdr112) and within 3 hours of use the hard drive failed. Unfortunately I haven't been able to find an image to put onto a new hard drive so I'm hoping someone here will be nice enough to PM me a link for one. Thanks very much for your replies.

[cwbaker]

Looking for an image for a DirecTivo DSR6000.

Thanks in advancwe for any help!

[wgeclipse]

Need a HR10-250 Image - Not real sure if it is the hard drive or the power supply. Sometimes the drives spin, sometimes not. Getting insert acess card as well.

[Ben_Jamin75]

Can anyone help with a TiVoHD image?

EDIT: Got it, thanks

[H2OPumper]

I'm looking for a HR10-250 image. I just had a HD failure.

[danail5]

any help with an HDR112 please? Any replies appreciated!

[adm1rab]

Let's just say the Christmas upgrade just went south......way south (something involving a wife and power switch for the PC). Can someone lend assistance with a series 3 image? Just looking to add a larger internal drive. Any directions/guidance is always appreciated.

[jco]

In need of a HDVR2 image, my HD just took a dump.

Thanks in advance!!!!

[Aiko]

Hi All,

Could someone please PM me a link for a Tivo 2 540040 image.
My original took a dump.

Thank you in advance...

[dbenrosen]

Hi,

I have a Series 2 Model TCD24008A in need of an image. The disk I have is toast.

Any help would be appreciated.

Thanks so much.

[MX7]

Mine just died. Looking for the drive image. I have the new drive, but just don't want to wait for a instantcake CD to arrive by mail.(can't find the purchase download of instantcake on their website) Can anyone help with either one? Thanks Mark

[parker805]

anyone know where i can find a replacement image for a bad b hdd in a philips ptv300? can i copy the a drive?

[rbtravis]

anyone know where i can find a replacement image for a bad b hdd in a philips ptv300? can i copy the a drive?The Image is normally on the a drive. Go to MFSlive.org download MFSlive-1.3b.iso burn to CD and boot from it. then run:mfsadd -x -r 4 /dev/hdc /dev/hdd
That should do it. Good Luck :)

[yogi3k]

Anyone know where i can find a replacement image for a bad b hdd in a Directv R10?

Thanks a lot.

[robstrash]

Need image for S1 Phillips HDR112. I added 2nd HDD few years ago and it had GSOD and now just reboots non-stop. I just ordered a new TivoHD but want to use this one on old TV upstairs so looking for image to put on a new drive. Any help appreciated.

[rbtravis]

Anyone know where i can find a replacement image for a bad b hdd in a Directv R10?

Thanks a lot.
The Image is normally on the a drive. Go to MFSlive.org download MFSlive-1.3b.iso burn to CD and boot from it. then run:mfsadd -x -r 4 /dev/hdc /dev/hdd
That should do it. Good Luck :)

[Stabu]

looking for either a 6.2a or 6.3f image for an HDVR2 Thanks

[flamtap]

I need an image for a tivo 240040. The drive crashed and I need something to put on the new one. Much thanks to anyone who can help me out!

[Dramaman]

Looking for a Series 3 Tivo image.. Willing to trade.. I have
tcd140060
tcd240080
tcd540040
tcd649DT
Pioneer 57h
human DRT 7.2
Sirs-6.2-01-2-381
hdvr2-3.1.1e
ptvnet62
ptvnet311e
HDR112
Sat T60
DSR7000
DSR704
HR10-250
R10
SDDVR40
DSR6000

[ostrom]

Mine just died. Looking for the drive image. I have the new drive, but just don't want to wait for a instantcake CD to arrive by mail.(can't find the purchase download of instantcake on their website) Can anyone help with either one? Thanks Mark


The "A" drive on my HR10-250 just died (totally fried), too, so I need an image to back up and running. Help! (Thanks in advance).

Andy

[Romera]

Im trying to fix a dead hard drive on a friends Tivo.

Looking for a image for a TCD540040.

Thanks

[freeze12]

If anyone has an image for a Toshiba RS-TX20 I really would appreciate it.I will pay (reasonable amount) for an image...Please PM Me...Thanks!!

...Dan.. "Troma"

[magnus]

If you are in dire need... isn't $20 a reasonable amount???

http://www.dvrupgrade.com/dvr/stores/1/instantcake_nomodel.cfm

If anyone has an image for a Toshiba RS-TX20 I really would appreciate it.I will pay (reasonable amount) for an image...Please PM Me...Thanks!!

...Dan.. "Troma"

[freeze12]

If you are in dire need... isn't $20 a reasonable amount???

http://www.dvrupgrade.com/dvr/stores/1/instantcake_nomodel.cfm

I prefer to purchase from a member if available.... Thanks for the reply.

[dwit]

I prefer to purchase from a member if available.... Thanks for the reply.

He is a member.:)

[BeeEff]

Amazing thread here. I'm trying to swap out a defective drive and am in need of an image. Thanks in advance for any help! I am looking for a Humax DRT-800 image.

[hotrodtod]

I am looking for an image for a 24004A. The drive just died. Need to install a new one. Any help would be appreciated. Thanks!!!!

[magnus]

as dwit mentioned... tivoupgrade (dvrupgrade) is a member.

are you really saying that you don't want to 'pay' for the image but that you'd really rather someone 'give' it to you? If that's the case then you should have said that to begin with.

tivoupgrade (dvrupgrade) (http://www.tivocommunity.com/tivo-vb/member.php?u=1395)



I prefer to purchase from a member if available.... Thanks for the reply.

[freeze12]

as dwit mentioned... tivoupgrade (dvrupgrade) is a member.

are you really saying that you don't want to 'pay' for the image but that you'd really rather someone 'give' it to you? If that's the case then you should have said that to begin with.

tivoupgrade (dvrupgrade) (http://www.tivocommunity.com/tivo-vb/member.php?u=1395)

I did say the word "PURCHASE" in My world that means: PAY $$$

[neil]

I'm looking for a 3.0 image for a Philips HDR112 if anyone can help.

.tbk would be great!

Thank you all in advance.

[jrott3n]

i was given a Tivo Phillips hdr 212 tivo without a hard drive... i just want to stick a little 40 gigger in it and use it only for pausing tv and rewinding, etc... can anyone help me with an image?

[magnus]

Ok, no problem.... then "PURCHASE" one from the member 'TivoUpgrade'.

I did say the word "PURCHASE" in My world that means: PAY $$$

[freeze12]

Ok, no problem.... then "PURCHASE" one from the member 'TivoUpgrade'.

Order placed from TivoUpgrade: Thanks for the info. and the reply...now await the disks arrival :up:

[kkesler]

Need an image for a DSR7000.

Thanks!

[abcdlooking]

Hello,

I need the image for a Toshiba RS-TX20 series 2 standalone. The drive gave up after about two years.

Thanks

[preacher6969]

:( my tivo drive just crapped out i need an image please! its a hughes hdvr2 series 2 , it was using version 3 i think ... oldie but a goodie :)

[varelse]

Requesting an image for a S1 Philips HDR112.

Thanks

[brigont]

I am lost.

I can't get my computer to recognize the original tivo hd drive (I think its failing) in order to format a 500gig replacement?

Anyone have this image?

[ChuckH]

I'm looking for the latest image for the Pioneer 810. I think it's around 9.x Stan doesn't have it. Anybody have it?

Thanks
Chuckh

[rcobourn]

I'm looking for the latest image for the Pioneer 810. I think it's around 9.x Stan doesn't have it. Anybody have it?

Thanks
Chuckh
Chuckh you can use pretty much any 810 image... it'll download the latest software when it connects.

[rcobourn]

I am lost.

I can't get my computer to recognize the original tivo hd drive (I think its failing) in order to format a 500gig replacement?

Anyone have this image?

You need to use Mfslive (http://www.mfslive.org/) to work with the drive.

[chiparch]

Hi Guys,

My Sony SAT-T60 (DirecTivo Series 1) died today, and of course the main drive died, and the hacked drive I added is still good

Does anyone have a Sony SAT-T60 (DirecTivo) image? An old, old post said the latest image was:

Sony_SAT-T60_3.1.0b

But like rcobourn says, any image would work -- the DirecTivo will just update to the latest image anyway.

Thanks!

Robert

[kkesler]

Need an image for a DSR704. Thanks.

[JimSpence]

As mentioned multiple times in this thread, go here.
http://www.dvrupgrade.com/dvr/stores/1/instantcake_nomodel.cfm

[rcobourn]

If you are in a rush for an image visit #tivo on EFnet and ask, then hang out until you get a reply.

[rcobourn]

Anyone have an HD image handy?

[threeIees]

Anyone have the most up to date 6.3e or 6.3f slices that I can load onto my hr10.

PM me if you can help.

Thanks,
Three

[CrashHD]

6.3f slice pack

emule (ed2k://|file|6.3f(6.3f-01.2_DirecTV_Tivo_slices).tgz|29018999|02EBAB75807C4D5367A03 7885862D0C0|h=SNW6LXM4ZWHZAVGGZBJLDH3P3AJJT26O|/)

rapidshare (http://rapidshare.com/files/76862446/6.3f_6.3f-01.2_DirecTV_Tivo_slices_.tgz)

[mikethecat]

TCD540040 image anyone?

[Unseenthings]

looking for tdc5400*
thanks
brian

[chris22]

I am looking for an HR10-250 image. Thanks,
Chris

[dwpriest]

I'm looking for a PTV100 (HDR212) Series 1 image. Can anyone help? Also, can I use mfslive or winmfs to copy the image to the disk on a USB external drive? Using a laptop and thus don't have real access to the IDE. Thanks
-Dan

[apex1123]

I need a Tivo HD image, please help!

[jwhiteuwc1]

Please PM am in need of a TCD648250B image file. HD Died.

[earlybirddisco]

I am looking for a Philips HDR112 or 212 image. Anyone can help?
Thanks.

[k1davis]

I need an HD image. Can someone PM me please?

Thanks!

[Da Goon]

I need an HD image. Can someone PM me please?

Thanks!

Well, there are 3 different models of "HD" tivos. Maybe you could be more specific if you actually want to get some help?

[mastiff34]

Looking for a Standalone TivoHD image if anyone can be of help, please pm me.

[earlybirddisco]

Installed a instantcake series one image on a hdr112 but it stops at the please wait boot screen. The only thing I am wondering is if I need to bless the drive or the image is for a networked tivo but mine doesnt have a network card. Can someone give me an insight?
Thanks.

[tivoupgrade]

Installed a instantcake series one image on a hdr112 but it stops at the please wait boot screen. The only thing I am wondering is if I need to bless the drive or the image is for a networked tivo but mine doesnt have a network card. Can someone give me an insight?
Thanks.

You should not need to do anything extra as that is the point of InstantCake, however, assuming you are certain the unit is working fine (it works with your original drive, yes?) then you might try this workaround (http://www.dvrupgrade.com/forums/showthread.php?t=14&highlight=stuck+powering) which has solved the problem for a small number of folks... Awhile back there were more folks who had a problem with this, but we updated this particular version of InstantCake a couple of years ago and folks seemed to stop having the problem...

[octopus80]

Can someone help me? Please PM me if possible.

Thanks for your help!

[nix7]

I need an image for a SD-DVR40; unfortunately I didn't manage to grab one before my HD quit. Does anyone have one that I could get a copy of? I came across a link while searching here to the image that Drez posted (link removed) but I can't tell if this is all I need or if there is additional software I need for my SD-DVR40 or what.

Also, does anyone know whether (if the Drez image works) I can use that image and then use the zipper hack, or is there something else I need to gather before I get started?

PM me if you like.

Thanks in advance for any and all help.

[earlybirddisco]

I did the install with the lba48 disk and it went tru however I am stuck at the dial up initial setup screen. I am outside the us and do not have a local dial up number. can someone say how I can get around the initial setup screen?
Thanks

[ciper]

What country? How will you use the Tivo without a dial up number? Why not configure it to call long distance?

[earlybirddisco]

I just need the DVR functionality and it would cost too much too use it dialup long distance. So I need a way to get past the initial call out.

[tivoupgrade]

I just need the DVR functionality and it would cost too much too use it dialup long distance. So I need a way to get past the initial call out.

Subscribe your DVR (because that is the right thing to do)... Install a TurboNet card (or a CacheCard) and you can make your connection using your LAN, instead of using a phoneline...

[ciper]

I ran Clear and Delete everything on a stock Tivo HD tcd652160 running 9.2a and created an image. It is around 440mb uncompressed (compression only saved about 20mb). I gave it to someone who monitors this thread so leave a message here and they will probably contact you.

Once you get it and try it let me know if it works because if not I can recreate it.

[Joybob]

Are there still Images out there for the S3?

[mastiff34]

I can confirm that Ciper's image works perfectly on an S3, I restored mine last night with his image provided by someone that monitors this thread.

Thanks a ton ciper!!

[swechsler]

Looking for a Humax DRT-400 image for one with a dead drive.

Thanks!

[ciper]

I can confirm that Ciper's image works perfectly on an S3, I restored mine last night with his image provided by someone that monitors this thread.

Thanks a ton ciper!!

No problem. Can you verify whether it was the THX certified piano black with glo remote S3 or the Silver faced with standard remote less expensive Tivo HD



Edit: Why was this thread never stickied?

[earlybirddisco]

I still need some help in getting past the initial dialup setup screen. I would have to make an international call to get it to work, moreover I had tried getting it to dial out in the past using a long distance code but I had never gotten it to work.
Thanks.

[coznkaos]

Could anyone help me with an image for a Phillips S1 PTV300? I think I could also use HDR312, but not entirely sure. I greatly appreciate any help at all. Thanks!

[alkap]

Need Image for Sony SVR2000
anyone know where this can be dowloaded. would like 3.0 if possible.

thanks
alkap

[gmitch64]

Does anyone have either an image, or a kernel/root file system dump for a TCD 140 please?

I did a monte on my tivo way back in the 4.0 days, got divorced, and now 2 years later, tivo have stopped her program guides, so she can't record anything. I tried to undo the monte last night, and I kinda messed it up. Ideally I'd like a kernel/root file system pair, so I can just dd it on and recover the existing recordings and season passes etc, but at worst I'll reimage the box.

If anyone can help, I'd be very grateful.

Graham

[Da Goon]

Does anyone have either an image, or a kernel/root file system dump for a TCD 140 please?

You can dump the root fs and kernel from mfs either via bash or while the drive in a pc. You just need mfs_dumpobj and mfs_uberexport from the mfs-utils package (http://sourceforge.net/projects/mfs-utils/).

mfs_dumpobj -r /SwModule will give you a listing of mfs objects containing the files in gzip'd cpio archives. They're all labeled pretty simply. The module file attribute listed next to them is their fsid.

mfs_uberexport <fsid> | gzip -d | cpio -id will dump and unpack the files into your current directory.

-edit- I just looked at a copy of some 4.01b slices and it appears to be a bit more complicated with older software. Sw 6.x and up has the root fs labeled as GZcore and GZhpk contains all files from /platform.

In 4.x these are spread out over several files - GZtvbin, GZlib, GZsbin, GZbin, GZkernel, GZtvlib, GZetc, GZopt and GZprom all contain the root fs. GZkernel of course contains the kernel. You would need to dump each one of these objects individually.

[dssslut]

I am looking for a Humax T2500 image. Any suggestions other than InstantCake?

Thanks!