PDA

View Full Version : Help Using freesat


robmdavies
07-01-2011, 05:40 PM
I have installed freesat, but need some help with the guided setup. When I used freeview, the setup ignored the analogue channel scan (output from stb), but after selecting freesat the setup wanted to scan for the output channel. 2 questions, the freesat box don't have rf on them so will it cause any problems getting past this point by just using a live tv channel? Also, how does TiVo know to record from the scart connection.

spitfires
07-02-2011, 01:35 AM
Sounds like exactly the same problem parsonjr is having over here - http://www.tivocommunity.com/tivo-vb/showthread.php?p=8594583

Make sure you select "Aerial + Digital Cable/Digital Terrestrial"
( and not "Digital Satellite + Digital Cable/Digital Terrestrial" )

And select "I do not have a set-top box".

Please let us know if that fixes it! :)

Automan
07-02-2011, 02:59 AM
Indeed, with the correct setup Tivo will expect to see the Freesat box on the AUX Scart connection.

Automan.

mikerr
07-02-2011, 04:08 AM
Make sure you select "Aerial + Digital Cable/Digital Terrestrial"
( and not "Digital Satellite + Digital Cable/Digital Terrestrial" )

No, the OP is using freeSAT

For FreeSAT it should be Aerial + Digital Satellite:

http://tivocentral.co.uk/guidedsetup/tivoguidedsat.jpg (http://tivocentral.co.uk/guidedsetup#8)

And select "I do not have a set-top box".
That message is only on dual source setup, not on normal screens.


Also note that later on Freesat-from-sky (using a sky box) should choose sky:

http://tivocentral.co.uk/guidedsetup/tivoguidesetupsatprov.jpg (http://tivocentral.co.uk/guidedsetup#14)

only choose freesat if you have a non-sky box i.e. humax etc.

spitfires
07-02-2011, 06:58 AM
True enough (the curse of cut&paste!). The nub of my point was to make sure you select a single source setup. (although parsonjr says he's done that but still gets asked for RF input channel :eek: ).

robmdavies
07-02-2011, 01:10 PM
Thanks, i shall try again, I think maybe it's saying yes to the "do you have a set top box" question that might be the problem.

robmdavies
07-03-2011, 02:46 PM
Thanks everyone. It's working, it was the slightly confusing "are you using a set top box" question that was causing the problem.

Just need to get a humax (or other supported receiver) so the TiVo can change the channel.:)

Automan
07-03-2011, 03:06 PM
Thanks everyone. It's working, it was the slightly confusing "are you using a set top box" question that was causing the problem.

Just need to get a humax (or other supported receiver) so the TiVo can change the channel.:)

Indeed, the Humax Freesat HD box cost a bit more but works better than the Harvard ones (bush, goodmans, grundig badged).

Automan.