2 outputs at the same time=Problems

[Pisser]

Pioneer 57H and 810H both have this problem.

I running component out to a PJ and the S-video to a LCD. Optical to a receiver and audio L/R to the LCD. When I watch the LCD I have video interference and major audio buzz. On the PJ I have extreme video interference and audio is fine (from receiver/optical). The only way to get rid of the interference and buzz is: disconnect whatever output (video and audio) of the TV I'm not watching. This really sucks. I'm just shocked that I can't output 2 at once. Pisses me off!!!!

I could buy an expensive component switcher that could handle my optical and rca audio's but don't wanna spend on another switcher (using one already for my gaming stuff and it's filled).

[sheilabriggs]

I dont have quite the same setup as you do. I have component video outputs hooked up to a TV and S-video to a sony media converter. I think I've had both outputs working at the same time, although normally I have only one active and the other completely switched off. If you have a standby mode on your units, this could be the source of your problem.

[Pisser]

What does your media converter do and how are you able to switch the outputs off?

Both of my outputs are connected at the same time but only 1 tv is being used while the other is not and vise versa.

I know my option is to use a 4x2 component switcher, but I'm gonna live with my interference. I have a PJ with a 10' screen so even when the interfernce isn't there, it still looks like crap. This DVD tivo really crushes the blacks and the compression is horrible. It's bearable on the 27".

Thanks for your reply...