gvorob
01-17-2006, 01:53 PM
Ok.
I installed the nic_install software as directed, as well as all software from the Jenkins website. I then put the Tivo HD back in the box- it booted fine but I STILL cannot dial out...
Mt settings are:
Dial prefix ,#401
Call waiting (none)
Tone/pulse tone
Set phone avail On (have tried Off setting too)
Set dial tone detection Off (have tried On too)
Preparing - success
Dialing - success
Connecting - Failed! Service unavailable.
What now? I can ping the Tivo, but cannot ftp it or telnet it....
PS. I'm running a S1 Sony SVR2000 with a D-link bridge conected via a D-link wirless G router.
Would appreciate all help...
I installed the nic_install software as directed, as well as all software from the Jenkins website. I then put the Tivo HD back in the box- it booted fine but I STILL cannot dial out...
Mt settings are:
Dial prefix ,#401
Call waiting (none)
Tone/pulse tone
Set phone avail On (have tried Off setting too)
Set dial tone detection Off (have tried On too)
Preparing - success
Dialing - success
Connecting - Failed! Service unavailable.
What now? I can ping the Tivo, but cannot ftp it or telnet it....
PS. I'm running a S1 Sony SVR2000 with a D-link bridge conected via a D-link wirless G router.
Would appreciate all help...