New Almost Complete TiVo Codes List

[Mfusick]

good stuff

[Dean42]

Hi....New here.....so may be out in left field with my question......
Is it possible to use an old tivo svr2000 to help me with livestreaming some videos? Appreciate any comments. Tnx for your time.

[Dean42]

♦♥♦

[unitron]

♦♥♦

Ignore the spammers and start a new thread to ask your original question.

[bryan4980]

If that were the case, I wish they would at least toss in a semi-backdoors mode to let us do some of the tricks from previous versions. I miss seeing what suggestions it plans to record, the more detailed Status screen, etc.

I half assed read this topic so I apologize if someone already said this but to view suggestions in the todo list on a series 4 press thumb down thumb up then the skip back button twice. Also to go from HD menu to SD thumb down thumb up and pause twice. Hope this hasn't been already said somewhere else.

[haplo888]

E-E-Rewind - Lets you set the "Offset:". Defaults to 2000.

E-E-FastForward - Lets you set the "Delay:". Defaults to 957.

The Offset and Delay control the overshoot correction.

Can somebody elaborate on the difference between Offset and Delay?

I'm looking to do a healthy reduction of my overshoot correction as after a FFx3 commercial skip I'm often looking at 20+ seconds of commercials after the correction.

Thanks,
Haplo

[bandit885]

To get the time display on my new premiere the normal S+P+S+9+S would not work.
I had to use what was stated as the HD version of it, S+S+P+S+9+S

Works just fine.

[jmbach]

5. Clear Clear Enter Enter codes
C-C-E-E stands for "Clear Clear Enter Enter". The following codes must be entered in the "System Information" screen.

.
.
.

C-C-E-E 0 [works even without Backdoors enabled] - It allows you to enter your own "Dial-in configuration code"! It does not appear to let you directly change the TFA value.

TFA stands for Toll Free Authorization.
Possible values:
0=[Access] denied ["you probably didn't ask, but you used a local, so QED"]
1=No decision [made yet] (you got time)
2=Oh you requested (we'll get back to ya)
3=Yeah, I guess so
4=Researched and you are out of luck
5=You had your chance but did nothing

The Dial In Access code (the 000 part) can be changed via some special key sequences.... Anyway, when Tivo CS gets a really unusual problem that needs files downloaded to the unit, they can tell the customer to change the access code and it'll then download certain types of files.. These may be predefined debugging type things or may be files the guy just then put on the server.

Best case scenario: Your daily call fails. Worst case scenario: Your Tivo breaks by downloading and running some weird debug thing and is unrepairable without a whole drive backup.

Dan

This code allows me to do three things on my S3 (with OLED) Enter Dial Code, Manual Tune, and View logs.

Enter Dial Code seems to be what is as decribed. Manual Tune does not appear to do anything. View logs lets you view all the logs on the var partition.

[jmbach]

This also works on my Premiere XL and it gives you couple more options. QE Tests and Play Vod Content. The latter states it in unavailable at this time.

Sent from my SPH-L710 using Tapatalk 2

[metivo]

With the latest TiVo update on my Premiere XL, Select Play Select Pause Select no longer works to make the progress bar go away quickly when pausing. Is there a new sequence to do that, or has TiVo disabled this great feature?

[ThAbtO]

With the latest TiVo update on my Premiere XL, Select Play Select Pause Select no longer works to make the progress bar go away quickly when pausing. Is there a new sequence to do that, or has TiVo disabled this great feature?

This only works when there is an ad available when you hit pause.

[metivo]

This only works when there is an ad available when you hit pause.

OK, after several tries I got it to work. You have to start with downarrow to get rid of the ad, or else the first select will go to an ad screen. I forget whether I had to add a right arrow as I used to in order to get rid of the progress bar during the sequence.

Martin

[rdrrepair]

Select - Play - Select - 7 - Select display calibration map for centering and overscan

http://i40.tinypic.com/2s8o7ec.jpgI was able to get this to work on my XL4. When the TiVo is in SD screen (menu) it fills the entire screen, while in HD it fills the upper left hand corner.

Now that I can see how far off my overscan is, is there an adjustment that I can make to the TiVo to fix it?

[wmcbrine]

Now that I can see how far off my overscan is, is there an adjustment that I can make to the TiVo to fix it?

No, the adjustment would have to be to the TV.

[supertechguy]

Very nice

[tivogurl]

No, the adjustment would have to be to the TV.
Like my TV, which has the "feature" that overscan cannot be adjusted or turned off on HDMI inputs, but can on composite or component inputs. I wonder what genius decided HDMI should have overscan at all, let alone be non-adjustable. Next time I buy a flat-panel I'm paying more attention to things like that.

[wkearney99]

Like my TV, which has the "feature" that overscan cannot be adjusted or turned off on HDMI inputs. I wonder what genius decided that was a good idea. Next time I buy a flat-panel I'm paying more attention to things like that.

Trouble is, it's really hard to determine these things until you've already got the beast home.

Stuff like Picture-in-Picture bugged me on our plasma. It'll only do the PIP for composite or an NTSC RF channel. Nowhere is it documented that it won't do PIP with two hi-res sources.

[Mikeyed]

Nice, very good stuff.