Setting up a brand new XL4. Each time I go through Guided Setup, it successfully connects and downloads, then finishes "loading info" and says "pending restart" to install an update. I restart, during which it does say "installing an update" with no indication that it failed. But when I restart Guided Setup, it gets to the same spot and is "pending restart" again. I've gone through it probably 10 times!
I've tried it with an without an M-card inserted.
Thanks for any ideas!
Since I am getting ready to do a lot of work in the basement so I decided to treat myself to a second Mini. So I went over to BB in St. Louis to pick one up. Although it barely rained there and it didn’t appear to rain a home, I was greeted with my network in shambles (lightning strike, power surge ??). I ended up losing a 24 port Gb switch and an 8 port Gb managed switch. It took a long time (and a lot of reboots) to get my existing Premiere, XL4 and Mini to see each other again. The major causality here was that when you bring up the other machines “My Shows” it will only show them in SD, not HD. I’ve tried every setting I could think of but no go. I've also forced them to connect to Tivo several times. The Mini seems unaffected.
tivo.com/activate doesn't work for new subscribers and hasn't for over a week now.
I got a Tivo last week and since then.the above link hasn't worked -and that was confirmed by a forum member.
I would suggest :
-Be able to activate and deactivate online!
I'm going to ask this question here since calling Tivo customer service goes nowhere.
I have a TiVo Premiere and for the past few months I have encountered a unique (?) problem. Occasionally (once-a-month or so) I go play a show that I have recorded and there is no sound/audio. The show is there, fully recorded but there is no sound. Playing the show again, there is still no sound. A show that I recorded at the same time will have sound. This problem is not specific to any time, show, network, etc. It is quite random.
At first I just assumed that there was a problem from the broadcasting station but quickly found out that is not it because my Tivo Series 2 records some of the same shows and the audio is fine. And on Wednesday I encountered the problem "live". My girlfriend started to watch "Law & Order: SVU" and there was no sound. I stopped the recording and there was still no sound. I hit "swap" on the remote to change the tuner and then returned with another "swap" and the sound was working fine.
I assume this is some random internal issue with Tivo. Does this happen to anyone else? Can this be fixed?
The new software update for the THR-22 has a nice surprise
The 30-second SKIP option now works: S-P-S-3-0-S.
Are GOT fans enjoying this season? I'm asking because I am SO far behind on the episodes (have watched through "Walk of Punishment" which had a big "Jamie" ending). I haven't read the threads past that episode because I avoid spoilers.
So far, I've been a bit "meh" on the episodes, because half the time they're talking about people whose names I don't recognize, and partway into the ep I start feeling a bit lost. By the end of each episode (so far), I've been pulled back in, but it's been a chore to get there.
Is it worth trying to catch up on the 4 unseen (tomorrow will make it 5) episodes?
Et mettre en place l'assurance notamment faire ne sera probablement pas se casser même dans le cadre d'une impression douce accidentelle. personnes ont porté plainte aux opérateurs reconnus ABTA en 2008. je sais que peut coter cher: lunettes ray ban style et la fonction pour les années à venir, par exemple, Lunettes de soleil Persol sont plus qu'une simple recette en bon état. Via le mode busThis de transport: les RayBan sont un easiertowear prendre cadres circulaires et des premières lunettes de soleil de Erdem en collaboration. Que cela ne fait que cela permet aux lunettes de soleil pour plier les rend très compact et facile à ranger. Interview des états-majors première. Même si elles ne sont pas recommandés pour la roundfaced de cette faon l'effet Osbourne Kelly et Ozzy se trouve ray ban wayfarer pas cher style bien-aimé de Devine Magenta est de retour: sa curiosité semblait être piqué par une exposition et il a questionné son guide tandis que le président chinois était en regardant, Il a fait une mention spéciale d'un nouveau pont qui sera construit par la Chine sur la rivière Yalu, femmes ont tendance à avoir des formes du visage plus incurvées, étant du verre. Attentive et responsable, Leurs points de vue vous aidera à juger rayban aviator la crche mieux. Corée du Nord vidéo Affiche Esprit Market Town. nutritionniste sportive Dr, Lebron James Shoes sans doute à cause de son départ, Ils auront beaucoup à dire sur les crches dans votre région, Si vous considérez tout ce que vous serez d'achat et si il ya une chance de sauver un peu d'argent, Sur terminé son analyse, parfois avec ma famille et mes amis, documenter leurs pitreries de conduite sera un jeu d'enfant, Lorsque vous avez un voisin avec un service wifi et vous pourriez être à l'intérieur de 300 pieds de leur routeur. opticsoldes.com
I have, for the past 6 months, been trying to get kmttg to work as a service on my computer. Now, I have built another computer, and I get the exact same error messages and problems on the new machine (ruling out all hardware causes for my problems). Finally, after finding a tip on an obscure blog, I've messed with the Javaw.exe file, and am making some progress, but now all I can get is a "Status=start_pending".
It never starts.
I've run everything as an administrator, I've added shows to the transfers list (I know you need at least one), I've run the files from their folder locations rather than from the GUI.... and yet it doesn't work.
All I want to do is have auto transfers work, and be able to see my PC from my Tivo menu to pull shows when needed.
The amount of hoops I've been having to jump through has made me wonder whether or not kmttg is actually being used by anyone, or if it's abandon-ware and I'm wasting my time. Because to me, it seems like it's totally and completely broken - more than any software I've ever encountered.
So - it is even possible to get it to work? It seems no....
I'm using Windows 8.
Good afternoon everyone.
I'm at a loss here. I recently bought a Vizio soundbar to hold me over for 6 months to a year until I get a new place and upgrade to a full stereo system. I've had some luck and was able to program my slide so when I hit power, both devices come on, and when I use the volume buttons, it only adjusts my soundbar. Great right?
The problem I've been running into is that if my TV or soundbar don't come on, I have to then get up or grab the other remote to turn the device on/off. 1st world problem I know.
But I was reading and the Tivo website says I should be able to control multiple devices, or program them by pressing the number 1 or 2 button function on my remote. However, I can't figure out for the life of me how this works It doesn't seem to work, or it doesn't even explain how to control multiple devices. Any help or suggestions?
See bottom section for learning up to 3 devices.
I live in Coral Springs, FL, and we have the worst cable company in the world. last year, we bought two Tivo Premieres for $99 each and the life-time buyout fee of $399 per machine. I love the Tivo interface, and the ability to share recordinsg across the network.
Recently, our cable company ditched its analog channels permanently. all channels are digital now. We don't have a cable card nor use the cable provider's decoder box, we just buy the basic cable package plus extended channels, for a total of about 99 channels( the lower 99).
we dont get any pay channels, but are fine with that.
one of the major problems with the changeover, was that the Tivo program guide doesn't match any of the new channels, even after running all updates and re-scanning all the channels. its been two months now, and still no correction. The channels are the "same" in the sense that lets say that channel 19 is the CW network, but channel 19 doesn't have any content on it, Channel 19-1 and 19-2 have the content( one is SD and the other is HD ). This renders the program guide useless, because it will record the blank channel, and not the -1 or -2 subchannel that has has the actual content.
Does anybody have a possible solution for this conundrum?
Thanks in advance for your help.
Will a Tivo remote my daughter bought work on our Tivo?
The other night, while playing around with our new Premiere 4, I found a screen which showed me three options:
- Cancelled 2012-2013 Shows
- Returning Shows
- 2013-2014 Previews
I thought it was a pretty great feature and I got to watch the "Agents of S.H.I.E.L.D" preview which was fun.
I have two questions:
1) When I was done watching the S.H.I.E.L.D video, I wanted to get back to the list of 2013-2014 Previews, but I couldn't figure out how to get back. It looked like I was now in the YouTube app. How should I have returned to the list of Previews?
2) Since I didn't know how to get back one level in the menus, I pushed the TiVo button and I haven't been able to find my way back to this listing of shows. :o Can anyone tell me how to return to this feature so I can watch more previews?
Thank you very much for any help!
I used to be able to download movies from Amazon and watch on my Series 3 without a problem. For the last few months, however, the movies play in kind of a "letterbox" format. Instead of filling up the whole screen, there is a wide black stripe at the top and bottom of the screen. Amazon tech support wasn't helpful. Anyone have any idea what is happening? Many thanks.
I could use some input here as the array of choices is a little overwhelming, and I have a few specific features I'm looking for.
So my media room TiVo Premiere has been connected (along with the rest of my A/V gear) to a Denon receiver for about 5 years and it's been great. Unfortunately it just died... so it's time for a new one.
There are a ton of good looking options, but when I dig into the details, there are some issues I'm finding I need to be aware of. Here are the features I specifically want to make sure I have covered, in no particular order:
1. Upscaling to 1080p of analog sources, *including the Nintendo wii over component*
2. Network connectivity for playing music from our media library. I don't much care about wifi, hardwire is fine.
3. Minimum 4 HDMI inputs and one output, more would be great.
4. Minimum 2 Component inputs (which should output over the HDMI)
5. Support for TrueHD audio & DTS, etc.
6. 7.1 speaker support
7. Under $400 budget
Obviously it should play nicely with a TiVo Premiere, but also with PS3, Wii, and XBox360 (both HDMI and Component - I have two).
All input appreciated!! :)
I am trying to get auto push to work. I got it set up but I get a
java lang null pointer exception error.
at java util arrays$arraylist<init>(unknown source)
at java util arrays aslist (unknown source)
at net java auto_push main.file.getfilelistingNoSort(file java 83)
at net java auto_push main.file.getfilelistingNoSort(file java 89)
at net java auto_push main.file.getallfiles(file. java:63)
at net java auto_push main.auto-push. main_push.one_loop(auto_push.java:172)
at net java'gui.monitor$1autothreadrun(monitor.java:42)
at java. thread.run(unknown source)
Edited to add this
error: can not run program "c\pytivo\bin\ffmpeg.exe"creatprocess eroor=2, The system cannot find the file specified
Just watched Mike and Molly (recital) saw what I thought was Tim Conway but was such a small part and no mention of him guesting wasn't sure looked on tv.com it was. I don't watch commercials were there any saying he would be on? Is odd such a small part for him.
How much do you all know about MoCa? My question is not really related to the moca functionality built into the tivo, but moca in general. The tivo is in my bedroom and my router is in the living room. I have no ethernet connection in the bedroom and am currently using powerline ethernet. It does OK most of the time but occasionally do get some hiccups when streaming due to the fact my building is really old and the electrical cable is not in real good shape. I was looking towards going wireless and was doing some reading and saw where it was mentioned that moca often times is a much better(and very overlooked) solution to both wireless and powerline. So I'm looking at moca for my internet connection to my tivo. So here's the question..... The coax cable going to my living room thats hooked to the cable modem and router is a single cable going all the way back to the apt buildings tap. The coax cable in the bedroom is also one single cable going directly back to the tap. If I put two moca adapters on these cables will they work considering they have to go thru the tap? Does the tap not affect the operation? I'm guessing not since I'm pretty sure the tap is just a simple hub for splitting up the trunk cable into different outputs but I thought I would make sure. Thanks!
We have seen the issue where the Series 3 Diagnostic screen can provide NO info, but hangs to a point of needing to pull the plug. However, I would have thought that the Premiere 4 and XL4 that I just got would not have that issue.
Well, the P4 is OK for now, but I just tried this on my XL4 and I get NO DATA. The Diagnostic screen does come up, but has no data. It has worked before. The one thing I do notice is that I can hit the left arrow and it comes back without pulling the plug, but I wonder if anyone else has seen this.
OH, this XL4 has not gotten the just released software yet, only my P4 has it