1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

which ms do i need

Discussion in 'DirecTV TiVo Powered PVRs & Receivers' started by ripio, May 25, 2012.

  1. ripio

    ripio New Member

    2
    0
    May 24, 2012
    hi to all,
    i hope i m in the good section to ask my questions

    i have 2 round dish,(each have a dual standart lnb) one pointed to 101 and other to 119, my receiver is a D12-100,

    1. when i try to do a sat setup for the 101, i got a " X " under 13v and a " OK" under 18v, is that normal?

    2. what M.S. i need to put together the 101 and 119?

    tanks in advance people!!!!!!!!!!!!!!
     
  2. litzdog911

    litzdog911 TechKnow Guide

    12,018
    0
    Oct 18, 2002
    Mill Creek,...
    Any DirecTV multiswitch will work. Connect the two LNB outputs from the 101º dish to the first two multiswitch inputs. Connect the two LNB outputs from the 119º dish to the third and fourth multiswitch inputs.

    Where are you located?
    Why do you need to receive 119ºW?
     
  3. ripio

    ripio New Member

    2
    0
    May 24, 2012
    tanks,
    i need the 119 because the spanish channels.
    i leave in montreal,

    by the way do you know if a diseqC sw going to do the job,

    (same as the dtv MS)?

    tanks again
     

Share This Page