1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

USB200M ver 2, Will it work after the Zipper?

Discussion in 'TiVo Underground' started by KrazyKevin, Nov 27, 2005.

  1. KrazyKevin

    KrazyKevin New Member

    106
    0
    Oct 31, 2003
    Liberty, TX
    give me a second. i just moved my cable to the #3 port on my router. It was in the #4/dmz port. So I rebooted my tivo from hyperterminal. I still only see 1 light on my adapter. also, on my router, I only see indication lights for ports 1 and 2, which are my computer and vonage router. The lights for #3 aren't lit up. I have the router firewall off. I'll try the ifconfig -a and report back
     
  2. KrazyKevin

    KrazyKevin New Member

    106
    0
    Oct 31, 2003
    Liberty, TX
    Doing what rbautch mentioned above gets me this:

    bash-2.02# sh /enhancements/net-launch.sh
    Please enter a static IP address for your Tivo: 192.168.1.103
    Please enter the IP address of your router: 192.168.1.1
    /enhancements/net-launch.sh: /enhancements/ipaddress_flag: Read-only file system

    couldn't read file "netconfig.tcl": no such file or directory

    Doing what you suggested gets me this:


    bash-2.02# ifconfig -a
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Bcast:0.0.0.0 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:38 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:2766 dropped:38 overruns:0 carrier:0 coll:0
     
  3. JamieP

    JamieP Member

    991
    0
    Aug 2, 2004
    The ifconfig output indicates the device isn't recognized, so the right driver probably isn't loaded. The "Read-only file system" and "couldn't read file" messages indicate the 'net-launch.sh' script you are running problem didn't do what it was supposed to do. rbautch is your man for that.
     
  4. KrazyKevin

    KrazyKevin New Member

    106
    0
    Oct 31, 2003
    Liberty, TX
    Thanks alot. Maybe he'll see all this in the morning. Thanks again.

    rbautch, I get this message:

    bash-2.02# sh /enhancements/net-launch.sh
    Please enter a static IP address for your Tivo: 192.168.1.103
    Please enter the IP address of your router: 192.168.1.1
    /enhancements/net-launch.sh: /enhancements/ipaddress_flag: Read-only file system

    couldn't read file "netconfig.tcl": no such file or directory

    But, I've went to that directory and the file is there. :(
    I'm giving up for tonight. Hope to start back later tomorrow. Thanks all.


    Kevin
     
  5. AJRitz

    AJRitz Princess Anti-Santa

    11,764
    2
    Mar 25, 2002
    Overland...
    I had problems connecting with the 200M adapter as well. The Netgear FA120 works much more reliably.
     
  6. hotrodjim48

    hotrodjim48 New Member

    1
    0
    Apr 14, 2006
    Samsung 4040 w/dtv 6.2 zipped w no errors on the install, it did it's self reboot. usb activated, poked around a bit and did restart from menu. pluged in a netgear ea101 usb 1.1 6mb. on boot the adapter's usb power and link leds lit up. I tried to telnet, ping and it didn't go. :confused: made a serial, hypertermed it and noticed the error "usb.c: USB device 2 (vend/prod number/number) is not claimed by any active driver. dtvo booted all the way. went to my pc and did a portscan on my subnet with no response. Tried running eathereal to see if i could "see" any activity on mac layer incase it was on another subnet and still a no show. tried a dlink 1somthin & 266w and still got the error: usb.c: USB device 2 (vend/prod number/number) is not claimed by any active driver. But the vend/product number was diff per adapter. So I shrugged it off for while. Purchased a Linksys usb200m 2.0 w/o the v2 sticker on the box. Hypertermed ran Enhancement script installed 2.0 drivers and the whole deal. rebooted, plugged in the 200m and got the usb.c: USB device 2 (vend/prod number/number) is not claimed by any active driver. power and link lights are on, but no activity. :mad:
     
  7. bxs122

    bxs122 New Member

    117
    0
    Aug 11, 2004
    How do you run the enhancement script via a serial cable?
    I have everything installed on an HR10-250 but since I have a USB200M I cannot run the enhancement script
     

Share This Page