1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tivo Series 2 Remote Control Code for a Dynex LCD

Discussion in 'TiVo Help Center' started by Kapinossa, Oct 9, 2012.

  1. Kapinossa

    Kapinossa New Member

    4
    0
    Oct 12, 2008
    Posting this question in a new tread after reading forum recommendations, so please disregard my earlier post today in a old tread which had no solution posted back in April 2012.

    I am looking for a Tivo remote control code for the Dynex LCD tv (DX-32L220A12) that will control the TV power and the mute function. Using the Tivo remote code 0091, which is suggested during guide setup by Tivo and from many similiar posts results in the TV turning off and then right back on with only one push of the Tivo power button. The TV mute functions also works for one second and then unmutes by itself. Has anyone found a solution other than using two remotes: one for Tivo functions and one for the TV power / mute / input functions? Please remember that I am looking for a Tivo remote code not the code for other universal remotes. Based on reading other posts on this same subject, code 0091 works for some Dynex LCDs but does not work for mine and a few others that have raised the same question. I am very familiar with remotes and universal remotes and I have tried numerous codes in the Tivo remote at least three times before saying that the codes does not work correctly. Trying to figure out what I am doing wrong or if someone has found a code that works on this model of TV for my Tivo remote.Thanks in advance, Steve
     
  2. lillevig

    lillevig Hot in West Texas

    1,769
    0
    Dec 6, 2010
    San Angelo, TX
    Have you tried the other two codes available for Dynex (0347, 0366)?
     
  3. Kapinossa

    Kapinossa New Member

    4
    0
    Oct 12, 2008
    Yes, they both did not work. I tried all three codes at least three times and even tried the codes after doing a remote control memory reset (three thumbs down then an enter key).
     
  4. unitron

    unitron Active Member

    16,389
    2
    Apr 28, 2006
    semi-coastal NC
    Find the FCC number on the TV and look it up on the FCC website and see if you can find a hint or clue as to who actually made the set and try their codes.
     
  5. Edmund

    Edmund Remote Czar TCF Club

    5,451
    2
    Nov 8, 2002
    Ca
    Did you get three blinks after entering the fourth digit of each code? If you only got one blink that code isn't in your tivo remote, and so theres still hope that they work.

    If the remote accepted each code, then is your tivo remote a glo remote? If so try teaching the commands.
     
  6. cannonz

    cannonz Active Member

    1,359
    3
    Oct 22, 2011
    Try codes for Orion, Emerson, Memorex, Sansui, Sylvania, and Zenith.
     
  7. Kapinossa

    Kapinossa New Member

    4
    0
    Oct 12, 2008
    I will try the codes assigned to the TV brands suggested when I visit my grandson who has my TiVo now. Trying many codes when not sitting in front of the unit is not very easy, so I was hoping someone had found the right code but all help is welcomed . On the entry of the codes, I was only able to get blinks after entering 0091, while the other two codes did not get the same response and I assume they were not available in the remote. Finally, I do not have the Global remote with learning feature.
     

Share This Page