1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Roamio Remote issues with Samsung TV

Discussion in 'TiVo Roamio DVRs' started by rdangel, Sep 13, 2013.

  1. rdangel

    rdangel New Member

    120
    0
    Sep 3, 2002
    Not sure if you have seen this. I tried all the codes with my Samsung plasma, and only 1 works. That's not the issue.

    What I notice is, when i hit Power, the light on my tv blinks so it is registering the signal, but it doesnt turn on. I literally have to hit the power button on the remote 3 times until it turns on.

    On the volume, with my old tivo remote, holding volume up makes the vol go up on the tv continuously. But with the RF remote, it only goes up 1 tick in volume if I hold the remote vol up.
    I am thinking that the IR blast on the remote is set to very short in order to preserve battery, but my tv isnt capturing a long enough burst of IR to turn on.

    I have NEVER had this problem with any other remote.
     
  2. Gary-B

    Gary-B Member

    115
    0
    Jun 3, 2009
    Texas
    I've got a 50" Samsung Plasma and remote code 0305 works like a champ. Same code works on the 67" Samsung DLP.
     
  3. PHeadland

    PHeadland New Member

    38
    0
    Mar 29, 2005
    San Mateo, CA
    The Roamio remote works fine with our Samsung LCD - exactly the same as our older TiVo remotes.
     
  4. tim1724

    tim1724 Member TCF Club

    253
    2
    Jul 3, 2007
    Temple City, CA
    Same here. Whatever the first code listed for Samsung is (0305, I think?) works perfectly with my Samsung LN46A750 LCD TV.
     
  5. Millionaire2K

    Millionaire2K New Member

    161
    0
    Jun 15, 2008
    Philadelphia
    Same here. The 1st Samsung code works on ALL 3 of my Samsung TV's.
     
  6. Bwatford141

    Bwatford141 Member

    109
    0
    Jan 5, 2012
    Raleigh, NC
    I had the same problem, until I changed the code to another one. I think it's 0305.
     
  7. tannett

    tannett Long time reader....

    24
    0
    Feb 8, 2007
    Cedar...
    Thanks for the tip! That volume issue was driving me nuts and I got tired of trying all the codes and never got to 0305 since one several before it at least worked... Just wasn't ideal.
     
  8. astrohip

    astrohip Well-Known Member TCF Club

    10,053
    39
    Jan 6, 2003
    Houston &...
    This exact problem. Just coming here to research it.

    This exact solution. Thank you! (And everyone else who chimed in)

    :up:
     
  9. simon7

    simon7 New Member

    45
    0
    Mar 26, 2008
    AWESOME! Thank you so much for solving this problem for me.
     
  10. hooper

    hooper Member

    199
    3
    Sep 22, 2007
    Now if someone could just figure out how to control the 2013 F450 or F550 samsung sound bars...
     
  11. takeagabu

    takeagabu New Member

    119
    0
    Oct 7, 2007
  12. Dan203

    Dan203 Super Moderator Staff Member TCF Club

    37,454
    166
    Apr 17, 2000
    Nevada
    If you buy a Slide Pro it has learning capabilities so you can teach it any commands you want. (actually up to 3 commands per button) I use it to learn the input command on my Onkyo receiver which is not supported by the default codes.
     
  13. hooper

    hooper Member

    199
    3
    Sep 22, 2007
    I have NOT tried this. Will give it a shot.

    Thanks
     
  14. hooper

    hooper Member

    199
    3
    Sep 22, 2007
    I didn't want to spend another $50 bucks honestly. I may go this route if/when it is available on Amazon.
     
  15. hazelnus111

    hazelnus111 New Member

    41
    0
    Feb 3, 2013
    I have a new Samsung TV and have tried all the Samsung codes on the Tivo remote. Best I can do is get the TV power working...volume doesn't work. I also tried the 0999 option. The interesting thing is that when I find a match with the latter option, I can control the volume just fine but as soon as I hit ENTER the volume buttons no longer work (TV Power still works). Any ideas why or what I can do to get this working?
     
  16. hazelnus111

    hazelnus111 New Member

    41
    0
    Feb 3, 2013
    Thanks heifer624. I had scoffed before at the instructions saying to change batteries before programming. Turns out my batteries in the remote were on their way out. Wasn't affecting the Power button but affected the Volume and Mute buttons!
     
    Last edited: Jan 10, 2016
  17. heifer624

    heifer624 New Member

    239
    0
    Jul 12, 2009
    Florida's...
    TIP.... If you go to the Settings>System Info screen and scroll a couple frames it will tell you what the battery strength in your RF remote is. Although I don't know how accurate it is ;)
     

Share This Page