1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

6.3e-01-02-301?

Discussion in 'TiVo Underground' started by dthreet, Aug 8, 2007.

  1. Aug 8, 2007 #1 of 13
    dthreet

    dthreet New Member

    178
    0
    Jan 17, 2006
    Chicago, IL
    is this the same software that is on the HR10-250's 6.3e-01-02-357? I sliced both my Phillips and HR10's last night and HR10's worked great. Phillips took an hour to update. I figured the were running on the same software as the HR10's, however i ran the scripts off DVRPlayground to enable hme etc. Well both my phillips went into welcome powering up loops.
     
  2. Aug 8, 2007 #2 of 13
    Da Goon

    Da Goon Registered Abuser

    1,396
    0
    Oct 22, 2006
    6.3e just began rolling out for HD and SD tivos. It's not a good idea to try to patch a new tivoapp like that without looking at the code a bit. You'll need to pull your drive and put your original tivoapp back to get out of the reboot loops.
     
  3. Aug 9, 2007 #3 of 13
    dthreet

    dthreet New Member

    178
    0
    Jan 17, 2006
    Chicago, IL
    ya I know how to fix it, however I just didnt anyone else to assume the same thing. since its the same software version and that 6.3 software on the hr10-250 will work on the series two directv units.
     
  4. labbie48

    labbie48 New Member

    3
    0
    Mar 29, 2006
    6.3e tivoapp patches

    #No encryption
    echo -ne "\x3C\x02\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=1601872


    #30-second skip
    echo -ne "\x10\x40\x00\x2b" | dd conv=notrunc of=tivoapp bs=1 seek=6717416


    #Backdoors
    echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=2804964


    #HMO/HME
    echo -ne "\x34\x11\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=903776
    echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=1118188
    echo -ne "\x10\x00\x00\x14" | dd conv=notrunc of=tivoapp bs=1 seek=5704588
     
  5. dthreet

    dthreet New Member

    178
    0
    Jan 17, 2006
    Chicago, IL
    here is the patch to removes Tivo Plus Features (Trial ends today)

    echo -ne "\x24\x02\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=918052

    also updated it on dvrpedia.com, hope this is helpful.
     
  6. Ghetto_Superstar

    Ghetto_Superstar New Member

    15
    0
    Nov 18, 2005
  7. morganjeeper

    morganjeeper RockRatt

    3
    0
    Aug 7, 2007
    Southern...
    Reading the patches above and from what i have read so far MRV does or does not work once the 6.3e update is applied? I used InstantCake 6.2 and PTvnet, then used the slicer to get to 6.2a and kept all my MRV and HMO working. I have read that MRV will no longer work. I do not want to update to 6.3e if not, I use MRV quite a bit at my house since we have 5 DirecTivo's networked. Any help is greatly appreciated.
     
  8. Da Goon

    Da Goon Registered Abuser

    1,396
    0
    Oct 22, 2006
    MRV was removed from 6.3e but HME support was added.
     
  9. dthreet

    dthreet New Member

    178
    0
    Jan 17, 2006
    Chicago, IL
    That has nothing to do with MRV. All it does is remove the message Tivo Plus Features (Trial ends today) from directv central. I did the same thing rolled both my philips back. However its either 6.3 or 3.1 on the HR10's. But when u run the above scripts it puts that Tivo Plus message at the bottom of the screen.
     
  10. Lord Vader

    Lord Vader Dark Lord ofthe Sith

    1,087
    0
    Aug 29, 2004
    The...
    Excuse the late question on this post, but are these patches all now included in the latest version of Zipper or tweak.sh? Just curious.
     
  11. HellFish

    HellFish I can dress myself.

    217
    0
    Jan 28, 2007
    It would appear so - link. You can also read the readme located in the rbautch_files which advises you of what updates are done to the files.
     
  12. Lord Vader

    Lord Vader Dark Lord ofthe Sith

    1,087
    0
    Aug 29, 2004
    The...
  13. dthreet

    dthreet New Member

    178
    0
    Jan 17, 2006
    Chicago, IL
    Well the zipper does have the 30 second skip and encription hack. You have to run these scripts via telnet for HME/HMO and to remove trial message. These only work on 6.3e.

    Originally Posted by labbie48
    6.3e tivoapp patches

    #No encryption
    echo -ne "\x3C\x02\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=1601872


    #30-second skip
    echo -ne "\x10\x40\x00\x2b" | dd conv=notrunc of=tivoapp bs=1 seek=6717416


    #Backdoors
    echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=2804964


    #HMO/HME
    echo -ne "\x34\x11\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=903776
    echo -ne "\x24\x10\x00\x01" | dd conv=notrunc of=tivoapp bs=1 seek=1118188
    echo -ne "\x10\x00\x00\x14" | dd conv=notrunc of=tivoapp bs=1 seek=5704588

    #Removes Tivo Plus Features (Trial ends today)
    echo -ne "\x24\x02\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=918052
     

Share This Page